PRACTICAL INFORMATION
TOWING THE VEHICLE Towing your vehicle
Towing another vehicle
Procedure for having your
vehicle towed or for towing
another vehicle using a re-
movable towing eye.
Access to the tools
On the front bumper, unclip the On the rear bumper, unclip the cover
cover by pressing it on the left.
Screw the towing eye in fully.
Install the towbar.
by pressing it on the left.
Screw the towing eye in fully.
Install the towbar.
Switch on the hazard warning lights Switch on the hazard warning lights
on the towed vehicle.
on the towed vehicle.
The towing eye is installed in the left-
hand side trim of the boot.
To gain access to it:
open the boot,
open the access flap in the left-hand
side trim,
remove the wheelbrace from its
support,
remove the towing eye from the
same support.
i
!
When towing with all four wheels on
the ground, always use a towbar.
When towing with only two wheels
on the ground, always use profes-
sional lifting equipment.
When towing with the engine off,
there is no longer any braking or
steering assistance.
Place the gear lever in neutral
(position N on the automatic
gearbox).
Failure to observe this special con-
dition could result in damage to
certain braking components and
the absence of braking assistance
the next time the engine is started.
185
English 