PRACTICAL INFORMATION
FITTING ROOF BARS
FITTING ROOF BARS
When fitting transverse
roof bars, ensure that they
are positioned correctly as
shown by marks under the
longitudinal roof bars.
When fitting transverse roof bars, use
the four quick-fit fixings provided for this
purpose:
lift the concealing flaps,
open the fixing covers on each bar
using the spanner,
put each fixing in place and lock
them on the roof one by one,
close the fixing covers on each bar
using the spanner.
Use accessories recommended by
PEUGEOT and follow the accessory
manufacturer’s fitting instructions.
In order to place a load on the roof,
transverse roof bars must be fitted on
the longitudinal roof bars.
After putting the load in place and se-
curing it, retighten the transverse roof
bars.
The longitudinal roof bars cannot
be removed.
Maximum authorised weight on the
roof bars, for a loading height not
exceeding 40 cm (except bicycle
carriers): 80 kg.
If the height exceeds 40 cm, adapt
the speed of the vehicle to the con-
dition of the road, to avoid damag-
ing the roof bars and the fixings on
the roof.
Please refer to national legislation
to comply with the regulations re-
garding the transportation of objects
which are longer than the vehicle.
i
i
Maximum authorised weight on the
roof rack, for a loading height not
exceeding 40 cm (with the excep-
tion of bicycle carriers): 80 kg.
If the height exceeds 40 cm, adapt
the speed of the vehicle to the pro-
file of the road to avoid damaging
the roof bars and the fixings on the
roof.
Be sure to refer to national legis-
lation in order to comply with the
regulations for transporting objects
which are longer than the vehicle.
English 