Driving
The steering mounted controls do not
F Start the engine.
Automatic operation
If the conditions are not met, there is an audible
signal, accompanied by a message on the
instrument panel screen.
allow neutral to be selected and reverse
gear to be engaged or disengaged.
F Select position D for automatic changing of
the six gears.
F With the engine running, press the brake
pedal.
F Release the parking brake, unless it is
programmed to automatic mode.
F Select position R, D or M.
The gearbox then operates in auto-adaptive
mode, without any intervention on the part
of the driver. It continuously selects the most
suitable gear according to the style of driving,
the profile of the road and the load in the
vehicle.
For maximum acceleration without touching
the selector, press the accelerator fully down
(kick-down). The gearbox changes down
automatically or holds the gear selected until
the maximum engine speed is reached.
When braking, the gearbox changes down
automatically to provide effective engine
braking.
Displays on the instrument panel
F Gradually release the brake pedal.
The vehicle moves off immediately.
If position N is selected inadvertently while
driving, allow the engine to return to idle,
then select position D to accelerate.
When you move the gear selector in the gate
to select a position, the corresponding symbol
appears in the instrument panel.
P.
Parking
For better safety, the gearbox will not change
up if you release the accelerator sharply.
R.
N.
D.
S.
T.
Reverse
If position R, D or M is selected when the
engine is running at idle, with the brakes
released, the vehicle moves even without
the accelerator being pressed.
Never leave children unsupervised inside
the vehicle with the engine running.
When carrying out maintenance with the
engine running, apply the parking brake
and select position P.
Neutral
Never select position N while the vehicle is
moving.
Never select position P or R unless the vehicle
is completely stationary.
Drive (automatic operation)
Sport programme
Snow programme
1 to 6.Gear engaged during manual operation
-.
Instruction not accepted in manual
operation.
Starting the vehicle
F
With your foot on the brake, select
position P or N.
120