Get Driving -> Speed limiter Guide for Peugeot 308 4 Door Second Genration (2014-2020)

Driving

Speed regulation remains active after

changing gear on vehicles fitted with a

manual gearbox and Stop & Start.

The speed limiter is deactivated temporarily and

the displayed programmed speed flashes.

Simply release the accelerator pedal to return to

the programmed speed.

Flashing dashes indicate a fault with the speed

limiter.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

On a steep descent or in the event of

sharp acceleration, the speed limiter will

not be able to prevent the vehicle from

exceeding the programmed speed.

The use of mats not approved by

PEUGEOT may interfere with the

operation of the speed limiter.

The operation of the cruise control can be

interrupted (pause):

by pressing control 4 or by pressing the

brake pedal,

To avoid any risk of jamming of the pedals:

ensure that the mat is positioned

correctly,

You may have to brake to control the speed of

your vehicle.

When the speed limit is exceeded but this is not

due to action by the driver, an audible signal

supplements the alert.

automatically, if operation of the dynamic

stability control system is triggered.

never fit one mat on top of another.

Switching off the ignition cancels any

programmed speed setting.

Once the vehicle slows down to the required

setting, the speed limiter is active again: the

speed setting display is fixed once more.

Cruise control

The cruise control system is a driving aid

that cannot, in any circumstances, replace

the need to observe speed limits, nor the

need for vigilance on the part of the driver.

As a safety measure, you are advised to

keep your feet near the pedals at all times.

The system automatically maintains

the vehicle’s cruising speed at a

setting programmed by the driver,

without using the accelerator pedal.

Switching off

F Turn the thumbwheel 1 to the "0" position:

the display of information on the speed

limiter disappears.

The cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

Steering mounted control

With a manual gearbox, it requires the

engagement of third gear or higher.

With an automatic gearbox, it requires the

engagement of the selector in mode D or of

second or higher gear in mode M.

Malfunction

135

Driving

1. Select cruise control mode.

6. Cruise control pause/resume indication.

7. Cruise control selection indication.

8. Value of the speed setting.

F continuously, in steps of +/- 5 mph (km/h),

press and hold button 2 or 3.

2. Use the current speed as the speed

setting/decrease the speed setting.

3. Use the current speed as the speed

9. Speed suggested by the Speed Limit

recognition and recommendation system

(depending on version).

Take care: pressing and holding button 2

or 3 results in a rapid change in the speed

of your vehicle.

setting/increase the speed setting.

4. Pause/Resume cruise control.

5. Depending on version:

Switching on/pausing

Display of speed thresholds in the memory

with the programmable cruise control

Use the speed suggested by the Speed

Limit recognition and recommendation.

As a precaution, it is recommended

that the cruise speed chosen be close

to the current speed of your vehicle, so

as to avoid any sudden acceleration or

deceleration of the vehicle.

F Turn the thumbwheel 1 to the CRUISE

position to select cruise control mode; the

function is paused.

F To start the cruise control and set a cruise

speed, once the vehicle has reached the

desired speed, press button 2 or 3: the

current speed of your vehicle becomes the

cruise speed setting.

You can release the accelerator pedal.

F Pressing button 4 interrupts operation of the

system (pause).

For more information on Memorising speeds

or on the Speed Limit recognition and

recommendation, refer to the corresponding

sections.

To modify the cruise speed setting using

memorised speed settings and from the touch

screen:

F press button 5 to display the memorised

speed settings,

F press the button for the desired speed

setting.

F Pressing button 4 again restores operation

Displays in the instrument panel

of the cruise control (ON).

The selection screen closes after a few

moments.

Modifying the cruise speed

setting

This setting becomes the new cruise speed.

To modify the cruise speed setting from the

speed suggested by the vehicle Speed Limit

recognition and recommendation:

F the speed suggested is displayed in the

instrument panel,

F make an initial press on button 5; a

message is displayed to confirm the

memorisation request.

The cruise control must be active.

To modify the cruise speed setting from the

current speed of the vehicle:

F in steps of +/- 1 mph (km/h), make

successive short presses on button 2 or 3,

136

Download User Manual App

Driving -> Speed limiter for Your Peugeot 308 4 Door Second Genration (2014-2020)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals