Download User Manual App

Quickly access user manual for free!

Driving -> Parking sensors for Your Peugeot 308 4 Door Second Genration (2014-2020)

Driving  
of sensors located in the bumper.  
centimetres, the sound signal becomes  
continuous.  
The sound emitted by the speaker (right or left)  
locates the obstacle in relation to the vehicle, in  
front or behind.  
Active Blind Spot  
Monitoring System  
Certain types of obstacle (examples: post,  
roadworks cone) detected initially will no longer  
be detected at the end of the manoeuvre, if  
they are located in blind spots in the sensors'  
field of detection.  
In addition to the fixed warning lamp in the door  
mirror on the side in question, a correction of  
trajectory will be felt if you cross a lane marking  
with the direction indicators on, to help you  
avoid a collision.  
Visual assistance  
This system cannot in any circumstances replace  
the need for vigilance on the part of the driver.  
Conditions for operation  
The following systems must be activated:  
-
-
Blind Spot Detection,  
Active Lane Keeping Assistance.  
Rear parking sensors  
The system is switched on by engaging reverse  
gear.  
The speed of the vehicle must be between 40  
and 87 mph (65 and 140 km/h) inclusive.  
This is confirmed by an audible signal.  
The system is switched off when you come out  
of reverse gear.  
This supplements the audible signal by displaying  
bars on the screen that move progressively  
nearer to the vehicle. When the obstacle is very  
close, the "Danger" symbol is displayed.  
Parking sensors  
Front parking sensors  
Audible assistance  
In addition to the rear parking sensors, the  
front parking sensors are triggered when an  
obstacle is detected in front and the speed of  
the vehicle is still below 6 mph (10 km/h).  
The front parking sensors are interrupted if  
the vehicle stops for more than three seconds  
in forward gear, if an obstacle is no longer  
detected or when the speed of the vehicle  
exceeds 6 mph (10 km/h).  
The proximity information is given by an  
This system indicates the proximity of an  
obstacle (examples: pedestrian, vehicle, tree,  
gate) which comes within the field of detection  
intermittent audible signal, the frequency of which  
increases as the vehicle approaches the obstacle.  
When the distance between the vehicle and  
the obstacle becomes less than about thirty  
156  
Driving  
Operating limits  
Maintenance  
The sound emitted by the speaker (front or  
rear) locates the obstacle in relation to the  
vehicle, in front or behind.  
recommendations  
-
Certain obstacles located in the sensors’  
blind spots may not be detected or no  
longer be detected during the manoeuvre.  
Sounds such as those emitted by noisy  
vehicles and machinery (e.g. lorries,  
pneumatic drills, etc.) may interfere with the  
vehicle's sensors.  
In bad or wintry weather, ensure that the  
sensors are not covered with mud, ice or  
snow. When reverse gear is engaged, an  
audible signal (long beep) indicates that  
the sensors may be dirty.  
-
Deactivation/activation of  
the front and rear parking  
sensors  
-
-
Certain materials (fabrics) absorb sound  
waves: pedestrians may not be detected.  
Accumulated snow or dead leaves on the  
road surface can interfere with the vehicle's  
sensors.  
The system is deactivated in the  
Vehicle/Driving menu, then the  
Driving functions tab of the touch  
screen.  
High pressure jet wash  
When washing your vehicle, keep the  
lance at least 12 inches (30 cm) away from  
the sensors.  
-
A front or rear impact to the vehicle can  
distort the settings of the sensors, which is  
not always detected by the system: distance  
measurements may be incorrect.  
The tilting of the vehicle if the boot is  
very loaded can affect the distance  
measurements.  
The sensors may be affected by poor  
weather conditions (heavy rain, thick fog,  
snowfall, etc.).  
F
Press this button. The indicator  
lamp in the button comes on.  
-
-
Pressing this button again reactivates the function.  
The indicator lamp in the button goes off.  
6
Operating fault  
On engaging reverse gear:  
The function will be automatically  
deactivated when connecting a trailer or a  
bicycle carrier on a towing device installed  
in accordance with the manufacturer's  
recommendations.  
This warning lamp comes on in the  
instrument panel and/or a message  
appears, accompanied by an audible  
signal.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
The parking sensors are deactivated while the  
Park Assist system is measuring a space.  
For more information on Park Assist, refer to  
the corresponding section.  
157