Driving -> Drive Assist Plus for Your Peugeot 408 4 Door Second Generation (2022-2026)

Driving  
This value is then immediately shown as the new  
speed setting on the instrument panel.  
After passing the sign:  
The colour of the symbols, representing the  
steering wheel and the side lines, depends on  
the operating state of the system:  
The system assists the driver by acting  
on the steering, acceleration and braking  
within the physical limits and capacities  
of the vehicle. Certain road infrastructure  
elements or vehicles in the surroundings  
may not be properly seen or may be poorly  
interpreted by the camera and radar, resulting  
in an unexpected change in direction, a lack  
of steering correction and/or inappropriate  
management of acceleration or braking.  
Press 4-OK . The message "OK?" is  
(grey)  
displayed to confirm the request to save.  
One or more operating conditions is  
not met; the system is paused.  
Press 4-OK again to save the suggested  
speed. The new speed setting value is  
displayed on the instrument panel.  
(green)  
All operating conditions are met; the  
system is active.  
Off  
(orange)  
System malfunction.  
Press 1: the cruise control information display  
Primarily designed for driving on main  
roads and motorways, this system only  
works with moving vehicles driving in the  
same direction as your vehicle.  
disappears.  
Press this button successively again until the  
OFF mode is displayed on the instrument  
panel.  
Malfunction  
In the event of a malfunction, dashes are  
displayed flashing and then fixed instead of the  
speed setting.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
After a few seconds, the Drive Assist Plus  
mode is deselected. The Driving aids area  
disappears.  
Selecting/Deselecting the  
system  
Adaptive cruise control  
Drive Assist Plus  
For more information, refer to the General  
recommendations on the use of driving  
and manoeuvring aids and the Specific  
recommendations on cruise control.  
This system automatically adjusts the speed  
and corrects the trajectory of the vehicle, using  
Adaptive cruise control with Stop&Go function in  
conjunction with Lane positioning assist.These  
two functions must be activated and in operation.  
For more information on Adaptive cruise  
control and Lane positioning assist, refer to  
the corresponding sections.  
ASSIST  
This system automatically maintains the vehicle  
speed at a value set by the driver (speed  
Press this button successively until the  
Drive Assist Plus mode is displayed on the  
instrument panel.  
setting), while respecting a safety distance from  
the vehicle in front (target vehicle) previously set  
by the driver. The system automatically manages  
the acceleration and deceleration of the vehicle.  
With the Stop & Go function, the system  
After a few seconds, the Drive Assist Plus  
mode is selected. The Driving aids area is  
displayed on the instrument panel.  
manages braking until the vehicle comes to a  
complete stop and restarts the vehicle.  
120  
Driving  
1. Selection/deselection of cruise control only  
or Drive Assist Plus (depending on version)  
2. Switch on/pause cruise control at the  
previously saved speed setting  
6. Speed setting value  
7. Speed suggested by the Road signs  
recognition function  
8. Vehicle held stationary (version with  
Stop&Go function)  
9. Inter-vehicle distance setting  
The brake lamps come on if the vehicle is  
slowed down by the system.  
The system is not operational in the event of  
a brake lamp failure.  
8
Confirmation of vehicle restart after  
automatic stop (version with Stop & Go  
function)  
10. Position of the vehicle detected by the  
3. Increase/Decrease the speed setting (if  
cruise control activated)  
system  
Activation of cruise control in progress (if  
cruise control deactivated)  
Display and configuration of the inter-  
vehicle distance setting  
Use  
To do this, the system uses a camera fitted at  
the top of the windscreen and, depending on  
version, a radar fitted in the front bumper.  
Selecting the system  
With the engine running, press successively  
on 1-ASSIST until cruise control mode is  
displayed on the instrument panel.  
4. Activation of cruise control in progress  
Use the speed suggested by the Road  
signs recognition function  
Primarily designed for driving on main  
roads and motorways, this system only  
works with moving vehicles driving in the  
same direction as your vehicle.  
After a few seconds, cruise control mode is  
selected. The Driving aids area is displayed  
(grey) and cruise control is ready to be  
activated.  
For more information on the Road signs  
recognition function, refer to the corresponding  
section.  
If the driver activates the direction indicator  
to overtake a slower vehicle, cruise control  
may temporarily reduce the distance to the  
target vehicle to facilitate overtaking, without  
exceeding the speed setting.  
Switching on cruise control  
Information displayed on  
the instrument panel  
With an automatic gearbox or a drive selector,  
your speed must be between 0 and 112 mph (0  
and 180 km/h).  
System activation is also subject to the following  
conditions:  
Steering-mounted controls  
Driver's door closed.  
Driver's seat belt fastened.  
Mode D selected on the automatic gearbox.  
Parking brake released.  
If the vehicle is stationary, brake pedal  
depressed.  
A message OK? is displayed if all activation  
conditions are met.  
Press 4-OK: the current speed becomes the  
5. Cruise control activated (green)/paused  
speed setting (minimum 19 mph (30 km/h))  
(grey)  
121