Driving -> e-Auto mode (Hybrid) for Your Peugeot 408 4 Door Second Generation (2022-2026)

Driving  
el, then remains on, accompanied by  
the display of a message.  
During parking manoeuvres, STOP mode  
Using the steering wheel paddles also  
causes the restarting of petrol engine.  
is not available for a few seconds after  
coming out of reverse gear or turning the  
steering wheel.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
The vehicle stalls in STOP mode  
All of the instrument panel warning lamps come  
on if there is a fault.  
The e-Auto mode cannot switch off the petrol  
engine in the following cases:  
Restarting the engine (START mode)  
The state of charge is less than 30% of the  
traction battery energy.  
The engine automatically restarts as soon as the  
driver indicates the intention of moving off again:  
With a manual gearbox:when the clutch pedal  
is fully depressed.  
Switch off the ignition then start the engine  
There is a need for vacuum brake assist  
depending on the altitude.  
again with the START/STOP button.  
With an automatic gearbox:  
– With the selector in mode D or M: when the  
brake pedal is released.  
– With the selector in mode N and the brake  
pedal released: when the mode D or M is  
selected.  
– With the selector in mode P and the brake  
pedal depressed: when the mode R, N, D or M is  
selected.  
12 V battery  
The Sport mode is selected.  
The Stop & Start system requires a  
12 V battery of specific technology and  
specification.  
All work must be carried out only by a  
PEUGEOT dealer or a qualified workshop.  
Maintaining thermal comfort in the passenger  
compartment (heating, air conditioning,  
demisting/defrosting).  
Deactivation/Reactivation  
By default, the function is activated when the  
ignition is switched on.  
e-Auto mode (Hybrid)  
– When the reverse gear is engaged.  
The petrol engine stops when low power or  
torque is required and in stabilised conditions.  
The petrol engine is restarted by the belt starter.  
The e-Auto mode can switch off the petrol  
engine in the following cases:  
Special cases  
It is configured in the ADAS touch  
screen application.  
or Direct access to the Shortcuts for  
driving aids.  
The engine will restart automatically if the  
conditions for operation are met again and in the  
following cases:  
– Deselecting the Sport mode (depending on  
equipment).  
The display of a message on the instrument  
panel confirms the change of state.  
When the operating strategies permit.  
Vehicle speed up to 90 mph (145 km/h).  
– Automatic gearbox in mode N, vehicle speed  
exceeds 0.6 mph (1 km/h).  
Function deactivated, this indicator  
lights up in the instrument panel.  
When the driver releases the accelerator  
pedal in stabilised conditions or in  
deceleration.  
In these cases, this indicator lamp  
flashes for a few seconds, then goes  
off.  
If high traction is required, the driver can  
deactivate the e-Auto mode using the  
touch screen application.  
During the stop phases.  
Malfunctions  
Restarting is only achieved by the belt starter  
until the torque demand is available, if the  
traction battery is sufficiently charged. When the  
torque demand is insufficient, the petrol engine  
restarts.  
In the event of a fault with the sys-  
tem, this warning lamp flashes for a  
few moments on the instrument pan-  
108