Get Ease of use and comfort Guide for Peugeot 5008 SUV Third Generation (2024-2025)

Ease of use and comfort

Adjust the backrest angle to as vertical a position

as possible; never tilt it more than 25°.

Adjust the head restraint so that its upper edge

is level with the top of the head.

Adjust the length of the seat cushion to support

your thighs.

Adjust the lumbar support so that it conforms to

the shape of the spine.

Adjust the steering wheel reach so that it is at

least 25 cm from the sternum and you can hold it

with your arms slightly bent.

Adjust the longitudinal position of the seat so

that you are at a distance of at least 25 cm from

the dashboard.

Adjust the head restraint so that its upper edge

is level with the top of the head.

Driving position

Correct seating position

Adopting a good driving position contributes to

improving driver comfort and protection.

It also optimises interior and exterior visibility as

well as access to controls.

Certain seat adjustments described in this

section depend on the trim level and the country

in which the vehicle is sold.

Before moving off

Adjust the interior and exterior door mirrors to

reduce blind spots.

Fasten the seat belt: place the diagonal belt in

the middle of the shoulder and adjust the lap belt

so that it is tightened across the pelvis.

Ensure that all passengers have fastened their

seat belts correctly.

Adjust the steering wheel height so that it does

not obstruct the information displayed on the

instrument panel.

Driver’s side

As a safety precaution, adjust the seats

only when the vehicle is stationary.

Electric door mirrors

Switch the ignition on to enable the

adjustments to be made.

Electrically-adjustable seats

Switch the ignition on to enable the

adjustments to be made.

When driving

Maintain a good driving position and hold the

steering wheel with both hands at the 'quarter to

three' position, so that you can easily and quickly

reach the controls behind and near the steering

wheel.

Passenger’s side

Sit fully back in the seat with your pelvis, back

and shoulders in contact with the seat backrest.

Adjust the seat cushion height so that your eyes

are level with the centre of the windscreen.

The head should be at a minimum distance of 10

cm from the roof.

Adjust the longitudinal position of the seat so

that you can fully depress the pedals with legs

slightly flexed.

Never adjust the seats or steering wheel

when driving. Always keep your feet on

the floor.

The distance between the knees and the

dashboard should be at least 10 cm, for easy

access to the dashboard controls.

Sit fully back in the seat with the pelvis, back and

shoulders in contact with the seat backrest.

46

Ease of use and comfort

Removing a head restraint

After adjustment, try to move the seat

backwards and forwards to ensure that the

seat is properly locked in place.

Front seats

Before moving the seat backwards, ensure

that there is no person or object that might

prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the floor behind the seat.

3

► Pull the head restraint fully up.

► Press lug A to release the head restraint and

raise it fully.

Height

► Stow the head restraint securely.

Refitting a head restraint

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint fully down.

Front head restraints

► Press the lug A to release the head restraint

and push it down.

Adjusting the height

► Pull the control upwards to raise or push

it downwards to lower, until you obtain the

position required.

► Adjust the height of the head restraint.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

Backrest angle

Manually-adjustable seats

Longitudinal

Upwards:

► Pull the head restraint up to the desired

position; you can feel the head restraint

clicking into position.

► Turn the knob to obtain the desired angle.

Downwards:

"AGR" certified seats

► Depending on equipment, press lug A or

button B and then, while still pressing, lower

the head restraint.

In addition to the manual adjustments, this seat

features manual adjustment of the seat cushion

length, electric adjustment of the seat cushion

angle and the electric lumbar adjustment.

► Raise the control bar and slide the seat

forwards or backwards.

The head restraint is correctly adjusted

when its upper edge is level with the top

of the head.

► Release the control bar to lock the seat in

position on one of the notches.

47

Ease of use and comfort

The control allows independent adjustment of

the depth and vertical position of the lumbar

support.

Seat cushion length

Cushion height and angle

►

Press and hold the front or rear of

the control to increase or reduce the

lumbar support.

► Press and hold the top or bottom of the

control to raise or lower the lumbar support

area.

► Pull the handle forwards to release the

cushion, then move the front part of the

cushion forwards or backwards.

► Tilt the rear of the control upwards or

downwards to obtain the required height.

Electrically-adjustable seats

► Tilt the front of the control upwards or

downwards to obtain the required angle.

Seat cushion angle

For safety reasons, seat adjustments

must only be made when the vehicle is

stationary.

Backrest angle

To avoid draining the battery, carry out

these adjustments with the engine running.

This seat also features the manual adjustment

of the seat cushion length and electric lumbar

support adjustment mentioned previously.

► Press and hold the front or rear of the button

to raise or lower the front part of the seat

cushion.

Longitudinal

► Tilt the control forwards or rearwards.

Memorising driving

positions

Electric lumbar adjustment

Associated with the electrically-adjusted driver’s

seat, this function allows two driving positions

to be memorised, to make these adjustments

easier if there are frequent driver changes.

It records the electric adjustments made to the

seat and door mirrors.

► Push the control forwards or backwards to

slide the seat.

48

Ease of use and comfort

Up to 3 keys can be set up. Memorising a

new position with one key cancels the previous

position linked to this key.

Using buttons 1/2/M

► Approach the vehicle with the electronic key

on you.

3

The driver's seat is moved when the driver's

door is opened.

Activation/Deactivation

In both cases

The Smart Seat function is config-

ured in the Settings > Vehicle touch

screen application.

An audible signal sounds when adjustment is

complete.

You can interrupt the current movement by

pressing button M, 1 or 2 or by using one of the

seat adjustment controls.

A stored position cannot be recalled while

driving.

► Then select Vehicle Access > Smart Seat.

► Press to activate/deactivate.

► Enter the vehicle and switch the ignition on.

► Adjust the seat and the door mirrors.

► Press button M, then press button 1 or 2

Recalling a stored position

within 4 seconds.

The recalling of stored positions is deactivated

45 seconds after switching off the ignition.

An audible signal confirms the memorisation.

Up to 3 keys can be set up. Memorising a

new position with one key cancels the previous

position linked to this key.

While the seat is moving, take care

that no person or object hinders the

automatic movement of the seat.

Heated and/or ventilated

seats

Using the Smart Seat function

With the ignition on or engine running

The heating function is active only with

the engine running and when the outside

temperature is below 20°C.

To recall the corresponding position using the

buttons:

Activation/Deactivation

► Press button 1 or 2.

When unlocking the vehicle with the

electronic key

Press the centre button of the lumbar

adjustment controls.

To recall the corresponding position using the

Smart Seat function:

The function is previously activated.

or

► Press the unlock button of the electronic key.

or

► Enter the vehicle and switch the ignition on.

► Adjust the seat and the door mirrors.

► Press button M.

► Within 5 seconds after pressing button M,

press unlock button of the electronic key

during at least 2 seconds.

Press the Seats application.

► Press the driver's door handle with the

electronic key on you.

► Select the Heating Functions or Ventilated

Seats tab.

or

► Select the driver or passenger seat.

An audible signal confirms the memorisation.

49

Ease of use and comfort

The corresponding page is displayed with the

last memorised settings.

► Select the driver or passenger seat.

Prolonged use of heated seats is not

recommended for people with sensitive

skin.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

To keep the heated pad intact and to prevent

a short circuit:

By default, the initial setting is in the middle

position.

If the settings are suitable, press to

activate/deactivate the function in the

Seat application.

► Press buttons "+" or "-", or move the slider to

the desired setting.

► Slide to the left/right for quick and easy

deflation/inflation of the adaptive bolster.

If no action is taken, the display returns to its

initial state.

– Do not place heavy or sharp objects on the

seat.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat is

damp.

The function status is not memorised when the

ignition is switched off.

The modifications are taken into account

immediately and are visible on the animation of

the corresponding seat in the page.

Changing settings

► In the Heating Functions or Ventilated

Seats page, select the relevant seat.

The setting can be reduced to the

minimum ("1"), but the function is not

completely disabled.

► Select an intensity from the three preset

levels: "1" (Low), "2" (Normal) or "3" (High).

Adaptive bolsters

The settings for this function can be stored with

the buttons M/2/1 or with the electronic key.

For more information on Memorising driving

positions, refer to the corresponding section.

The settings are memorised when the ignition is

switched off.

This function provides better lateral and lumbar

support for the driver and front passenger.

The position is set by inflating/deflating the

adaptive bolster using the corresponding page

in the touch screen.

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function off; reducing electrical

consumption in turn decreases energy

consumption.

Malfunction

In the event of a malfunction, a message is

displayed in the touch screen.

The message may be displayed when opening

the Bolster tab or during setting the position.

Go to a PEUGEOT dealer or a qualified

workshop.

It is possible to store the position setting and

also to recall the stored position later.

Settings

Press the centre button of the lumbar

adjustment controls.

or

Press the Seats application.

► Select the Bolster tab.

50

Ease of use and comfort

Configuration examples for

3008

► Select a massage intensity from the three

preset levels: "1" (Low), "2" (Normal) or "3"

(High).

Multipoint massage

3

System with a choice of type of massage and

adjustment of its intensity.

This system operates with the engine running,

as well as in STOP mode of the Stop & Start.

► Select another type of massage from those

offered.

The modifications are taken into account

immediately and memorised when the ignition is

switched off.

Once activated, the system starts a one hour

massage cycle, made up of sequences of 6

minutes of massage followed by 4 minutes at

rest.

Activation/Deactivation

Press the centre button of the lumbar

adjustment controls.

5 seats

3 seats

4 seats

or

The system stops automatically at the end of the

cycle.

Press the Seats application.

Seat modularity

Transport of objects

► Select the Massage tab.

► Select the driver or passenger seat.

It is prohibited to drive with a second

row backrest folded in cargo version

(for transporting objects), while a passenger

occupies a third row rear seat.

Configuration examples for

5008

The corresponding page is displayed with the

last memorised settings.

If the settings are suitable, press to

activate/deactivate the function in the

Seat application.

In order to easily adapt your interior space,

you can fold all the seats. This gives you a

continuous load floor up to the back of the

front seats. Folding or unfolding the seats

must only be done with the vehicle stationary.

If no action is taken, the display returns to its

initial state.

The function status is not memorised when the

ignition is switched off.

7 seats

4 seats

5 seats

Changing settings

► In the Massage page, select the seat

concerned.

Transport of objects

51

Ease of use and comfort

As a safety measure, the mirrors should

be adjusted to reduce the "blind spots".

The objects that you see in the mirrors are

in fact closer than they appear. Take this

into account in order to correctly judge the

distance of vehicles approaching from behind.

Heated steering wheel

Steering wheel

adjustment

In cold weather, this function heats the circular

part of the steering wheel.

It can be activated when the outside temperature

is below 20°C.

In the Climate touch screen applica-

tion, select the Seats and Steering

Wheel tab.

Adjustment

Press to activate/deactivate the func-

tion.

► When stationary, pull the control to release

the steering wheel.

The function is memorised each time the engine

is switched off.

► Adjust the height and reach to suit your

driving position.

► Push the control to lock the steering wheel.

Mirrors

For safety reasons, these adjustments

must only be carried out with the vehicle

stationary.

Door mirrors

Demisting/Defrosting

PEUGEOT panoramic i-Cockpit®

Driving information and infotainment are

available on two 10-inch screens side by

side or on a dual 21-inch curved screen

(depending on version).

The instrument panel information is visible

above the steering wheel, for greater safety

and driving comfort.

The demisting/defrosting of the door

mirrors works with the demisting/ de-

frosting of the rear screen.

► Move control A to the right or to the left to

select the corresponding mirror.

► Move control B in any of the four directions to

adjust.

For more information on Rear screen

demisting/defrosting, refer to the

corresponding section.

► Return control A to its central position.

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

Adjust the steering wheel height so that it

does not obstruct the instrument panel.

► Turn the mirror towards the vehicle.

Electric folding

Depending on equipment, the door mirrors can

be folded electrically.

52

Ease of use and comfort

– Once the vehicle speed exceeds 6 mph (10

km/h).

– When the engine is switched off.

To ensure optimum visibility while

3

manoeuvring, the mirror automatically

brightens when reverse gear is engaged.

The system is inoperative if the load in the

boot exceeds the height of the load space

cover or if the load space cover has items

placed on it.

It can be activated/deactivated in the

Settings > Vehicle touch screen ap-

plication.

► From the inside, with the ignition on, place

control A in the central position.

► Pull control A backwards.

► Lock the vehicle from the outside.

The inclination of the mirrors is different

between the two sides. It is more important

on the passenger side to show more of the

ground.

Second row seats

If the mirrors are folded using control A,

they will not unfold when the vehicle is

unlocked.

Rear head restraints

Electrochrome interior rear

view mirror

Electric unfolding

► From outside: unlock the vehicle.

► From inside: with the ignition on, place

control A in the central position and then pull

it rearwards.

The automatic folding/unfolding of the door

mirrors is configured in the Settings >

Vehicle touch screen application.

Before using an automatic car wash, fold the

mirrors.

They have two positions:

– A high position, for when the seat is in use:

► Pull the head restraint fully up.

Automatic tilting in reverse gear

– A low position, for stowing, when the seat is

Depending on version, this function allows you to

automatically tilt the mirrors downwards to assist

with parking manoeuvres in reverse gear.

With the engine running, on engaging reverse

gear, the mirror glasses tilt downwards.

They each return to their original positions:

– A few seconds after coming out of reverse

gear.

not in use:

► Press the lug A to release the head restraint

The electrochrome system uses a sensor that

detects the level of exterior brightness and that

coming from the rear of the vehicle, in order to

automatically and gradually switch between day

and night usage.

and push it down.

The rear head restraints can be removed.

Removing a head restraint

► Release the backrest using control 1.

53

Ease of use and comfort

► Tilt the backrest slightly forwards.

► Pull the head restraint fully up.

► When repositioning, lift up the backrest fully

until it locks.

► Press the lug A to release the head restraint

Repositioning the backrests

and remove it completely.

First check that the outer seat belts are

lying vertically flat alongside the backrest

latching rings.

Never drive with passengers seated at

the rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

The head restraint for the centre seat

and those for the outer seats are not

interchangeable.

► Press the backrest release grip 1.

► Guide the backrest 2 down to the horizontal

position.

When the backrest is released, the red

indicator in the release grip is visible.

Central backrest

Folding the backrests

The central section of the backrest may be

► Put the backrest 2 in the upright position and

push it firmly to latch it home.

folded down independently of the side sections.

Manoeuvring the backrests should only be

done when the vehicle is stationary.

► Check that the red indicator is no longer

visible in the release grip 1.

First steps:

► Ensure that the outer seat belts were not

trapped during the operation.

► Lower the head restraints.

► If necessary, move the front seats forward.

Please note: an incorrectly latched

backrest compromises the safety of

passengers in the event of sudden braking or

an accident.

The contents of the boot may be thrown

forwards - risk of serious injury!

► Check that no person or object might

interfere with the folding of the backrests

(e.g. clothing, luggage).

► Check in advance that the rear armrest is

not folded down and that the central head

restraint is not raised.

► Check that the seat belts are free, not

engaged in the buckles. Release them so

that the backrest can be moved.

► From inside the passenger compartment or

from the boot, pull on the strap to release.

► Fold the backrest onto the seat cushion.

54

Ease of use and comfort

On/Off

Prolonged use of heated seats is not

recommended for people with sensitive

3

skin.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

The control buttons for each side seat are

located at the rear of the centre console.

To keep the heated pad intact and to prevent

a short circuit:

– Do not place heavy or sharp objects on the

seat.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat is

damp.

► Press the button corresponding to the seat.

► Each press changes the heating level; the

corresponding number of indicator lamps

come on.

► To switch off the heating, press the button

until all of the indicator lamps are off.

The function status is memorised when the

ignition is switched off.

The function is active only with the engine

running and when the outside temperature is

below 20°C.

Third row seats

From the outside or from the third row seats:

► Pull paddle D and guide the backrest

forwards to tilt it and move the seat forwards.

Before moving the seat backwards, ensure

that there is no person or object that might

prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the floor behind the seat.

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function off; reducing electrical

consumption in turn decreases energy

consumption.

To put the seat back in place:

► Straighten the backrest until the seat locks.

Whatever the initial position of the seat, it is

placed automatically a third of the way along

the longitudinal adjustment range in order to

preserve enough space for passengers in the

third row seats.

Accessing third row seats

If this system fails (paddle D),the third row

passengers can also get out after having

folded the backrest of the second row seats

using strap.

The third row seats are accessed via the second

row side seats.

Do not let children operate the seats

unsupervised.

55

Ease of use and comfort

Third row head restraints

Repositionning third row

backrests

Heating and Ventilation

Adjustment

Air intake

For more information on Rear head restraints,

including their adjustment, refer to the

corresponding section on page 53.

The air circulating in the passenger compartment

is filtered and originates either from the exterior,

via the grille located at the base of the

windscreen, or from the inside in air recirculation

mode.

Straighten the backrest until it locks.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

Controls

Depending on version, certain con-

trols are accessible in the Climate

touch screen application and/via the

control panel on the centre console.

Folding third row backrests

Folding third row backrests from the boot:

- Pull the straps in the middle of the row to

unlock the desired seat and give the backrest a

slight push forwards.

Air distribution

It is possible to fold 1 or 2 backrest.

1. Windscreen demisting/de-icing vents

2. Front side window demisting/de-icing vents

3. Adjustable and closable side air vents

4. Adjustable and closable central air vents

5. Air outlets to the front footwells

6. Air outlets to the rear footwells

7. Adjustable and closable air vents

56

Ease of use and comfort

Advice

If the interior temperature is very high

after the vehicle has stood for a long

time in the sunshine, air the passenger

compartment for a few moments.

Put the air flow control at a setting high

enough to quickly change the air in the

passenger compartment.

Stop & Start / e-Auto mode

3

The heating and air conditioning systems

only operate when the engine is running.

Temporarily deactivate the corresponding

system to maintain a comfortable temperature

in the passenger compartment.

Using the ventilation and air

conditioning system

► To ensure that air is distributed evenly,

keep the external air intake grilles at the

base of the windscreen, the nozzles, the

vents, the air outlets and the air extractor

in the boot free from obstructions.

For more information, refer to the

corresponding section.

Condensation created by the air

conditioning results in a discharge of water

underneath the vehicle. This is perfectly

normal.

Rechargeable hybrid vehicles

Intensive use of the air conditioning

reduces the vehicle range in Electric mode.

► Do not cover the sunshine sensor located

on the dashboard; this sensor is used

to regulate the automatic air conditioning

system.

Servicing the ventilation and air

conditioning system

Electric vehicles

► Operate the air conditioning system for

at least 5 to 10 minutes once or twice a

month to keep it in good working order.

Selecting the ECO driving mode reduces

electrical energy consumption, but restricts

the performance of the heating and air

conditioning systems, although it does not

deactivate them.

► Ensure that the passenger compartment

filter is in good condition and have the

filter elements replaced regularly.

► If the system does not produce cold air,

switch it off and contact a dealer or a

qualified workshop.

We recommend using a composite passenger

compartment filter. Its specific active additive

helps protect against polluting gases and bad

smells.

Ventilation with the ignition on

When towing a large load on a steep gradient

in high temperatures, switching off the air

conditioning increases the available engine

power, enhancing the towing capacity.

When the ignition is switched on, the ventilation

system and the air flow 2 and air distribution

3 settings in the passenger compartment are

activated, for a period which depends on the

battery charge.

► To ensure correct operation of the air

conditioning system, have it checked

according to the recommendations in the

Manufacturer’s service schedule.

Avoid driving for too long with the

ventilation off or with prolonged operation

of interior air recirculation. Risk of misting and

deterioration of the air quality!

This function does not include the air

conditioning system.

57

Ease of use and comfort

6. Driver/front passenger temperature

synchronisation

7. Clean Cabin function

8. Front demisting/de-icing

9. Interior air recirculation

10. Quick Launch function

11. Rear screen demisting/de-icing

12. Switching the system off

Dual-zone automatic air

conditioning

This system automatically controls the activation

of the air conditioning system, regulating the

temperature, air flow and air distribution inside

the passenger compartment.

Automatic air conditioning

This automatic mode ensures optimum

management of the passenger compartment

temperature, air flow and air distribution, based

on the selected comfort level.

► Press button 5-AUTO to activate/deactivate

the automatic mode of the air conditioning

system.

This system works with the engine running, but

access to the ventilation and its controls remains

possible with the ignition on.

Temperature adjustment

The indicator lamp in the button lights up

when the air conditioning system is operating

automatically.

The intensity of the automatic air conditioning

is modulated by choosing one of the following

settings:

The driver and front passenger can each choose

their own temperature setting.

The value indicated corresponds to a level of

comfort and not to a precise temperature.

Press the Climate application button

to display the system controls page.

► Press one of the buttons 1 (+ or -) or drag

vertically to increase or decrease the value.

– AUTO SOFT: provides soft and quiet operation

by limiting air flow.

It is possible to go beyond the minimum and

maximum values by selecting respectively Low

or High.

– AUTO NORMAL: offers the best compromise

between a comfortable temperature and quiet

operation (default setting).

It is recommended that you avoid a difference of

more than 3°C in the settings for left and right.

– AUTO FAST: provides dynamic and efficient

air distribution.

To change the AUTO mode, press button 5-

AUTO successively.

To ensure passenger comfort in the rear seats,

favour settings AUTO NORMAL and AUTO

FAST.

Temperature

synchronisation

The driver side temperature setting is applied to

the passenger side.

1. Temperature adjustment

2. Air flow adjustment

3. Air distribution adjustment

4. Air conditioning on/off

5. Automatic air conditioning on/off and

setting

► Press button 6-SYNC to activate/deactivate

the function.

The function is automatically deactivated if the

passenger uses their temperature adjustment

buttons.

(AUTO SOFT/AUTO NORMAL/AUTO

FAST)

58

Ease of use and comfort

Quick Launch function

In cold weather with the engine cold, the

air flow is increased gradually until the

comfort setting has been reached, in order to

limit the delivery of cold air into the passenger

compartment.

On entering the vehicle, if the interior

temperature is much colder or warmer

than the comfort setting requested, there

is no need to alter the value displayed to

more quickly reach the required level of

comfort. The system automatically corrects

the temperature difference as quickly as

possible.

Switching off the air conditioning

system

When the air flow is reduced to a minimum,

ventilation stops.

3

Using the interior temperature sensor, this

function automatically activates:

– If cold temperatures are detected (below

around 4°C):

• Heating (High)/Heated seats/Heated steering

wheel.

“OFF" is displayed alongside the fan.

Adjusting the air distribution

• Air distribution towards the footwells and

maximum air flow.

► Press the buttons 3 to adjust the air

flow distribution inside the passenger

compartment.

– If mild temperatures are detected (between

approximately 4°C and 35°C):

• Air conditioning (AUTO FAST).

• Automatic air distribution and maximum air

flow.

• Temperature setting at 21°C.

– If hot temperatures are detected (above

around 35°C):

Windscreen and side windows

Central and side air vents

Footwells

Automatic air conditioning

manual settings

• Air conditioning (Low)/Ventilated seats.

• Air distribution towards the side and central

vents and maximum air flow.

It is possible to manually adjust one or more

of these functions, while the system retains

automatic control of the other functions:

– air flow.

– air distribution.

The indicator lamp in the "AUTO” button goes

out if a setting is changed.

► To activate/deactivate the function, press

button 10-MIN/MAX°.

A symbol is activated to display the presence of

blown air in the direction indicated.

It is possible to activate all three

buttons simultaneously, for uniform distribution

throughout the passenger compartment.

► Press button 5-AUTO again to reactivate

automatic air conditioning.

Adjusting the air flow

► Press one of the buttons 2 (fan) or drag

horizontally to increase or decrease air flow.

It is also possible to directly press one of the

values.

59

Ease of use and comfort

Clean Cabin function

Air conditioning on/off

Tri-zone automatic air

conditioning

It includes the AQS (Air Quality System) and

Clean Air functions.

Air conditioning on/off The air conditioning

system is designed to operate effectively in all

seasons, with the windows closed:

– It lowers the temperature in summer.

– It increase the effectiveness of the demisting,

in winter, above 3°C.

► To activate/deactivate the function, press

button 7.

AQS function

Using an exterior pollution sensor, this function

automatically activates the recirculation of

interior air when a certain level of pollutants in

the exterior air is detected.

When the air quality returns to a satisfactory

level, recirculation of interior air is automatically

deactivated.

This function is not designed to detect

unpleasant odours.

Recirculation is automatically activated when the

windscreen wash is used or when reverse gear

is engaged.

► Press button 4-A/C to switch the air

conditioning on/off.

When the function is switched on, "A/C"

changes colour.

Air conditioning does not operate when the

air flow is deactivated.

To obtain cool air more quickly, enable interior

air recirculation for a brief period. Then return

to the intake of exterior air.

Switching off the air conditioning may result in

some discomfort (humidity or misting).

Clean Air function

Using an interior pollution sensor, this function

detects fine particles (e.g. cigarette smoke,

mould, bacteria).

Switching off the air

conditioning system

When this function is activated, the rear air

vents blower starts up. In this case, the rear

passengers can control the air flow from these

air vents independently of the air conditioning air

flow control for the front air vents.

When the function is deactivated,the maximum

air flow distributed by rear air vents is limited by

the air conditioning air flow setting for the front

air vents.

The management of the recirculation of interior

air makes it possible to return to a purified

passenger compartment in just a few minutes,

thanks to the passage of air through the

highperformance passenger compartment filter.

If the air quality appears to be reduced, contact

a ok will dodealer or a qualified workshop

to change the high-performance passenger

compartment filter.

► Press button 12-OFF.

Its indicator lamp lights up and all the other

indicator lamps of the air conditioning system go

off.

This action deactivates all of the functions of the

air conditioning system.

The temperature is no longer regulated. A slight

flow of air can still be felt, due to the forward

movement of the vehicle.

► Press the "large fan" or "small fan" button

to increase or decrease the air flow.

The corresponding indicator lamps come on.

60

Ease of use and comfort

If all of the indicators lamps are off, a slight air

flow can still be felt as a result of the vehicle's

movement.

The air flow can be changed manually without

deactivating this mode.

Heated windscreen

3

With Stop & Start, when demisting has

been activated, STOP mode is not

available.

Interior air recirculation

The intake of exterior air prevents the formation

of mist on the windscreen and side windows.

Recirculating the interior air isolates the

passenger compartment from outside odours

and fumes and allows the desired passenger

compartment temperature to be achieved more

rapidly.

In wintry conditions, before moving off, it is

essential to remove any snow or ice from

the windscreen around the camera.

Otherwise, the operation of the equipment

using the camera may be affected.

In cold weather, this function heats the entire

windscreen and complements the Automatic

Visibility programme to speed up the evacuation

of elements that interfere with visibility (e.g. dew,

mist, frost, snow), located on either side of the

windscreen.

► Press this button to activate/de-

activate the function (confirmed

by the illumination/extinction of

the indicator lamp).

Rear screen demisting/

defrosting

This demisting/de-icing only works with the

engine running.

It can be used both before setting off and while

driving.

This function is activated automatically

when the front screenwash is used or

reverse gear is engaged.

Switching on/off

Depending on version, it also demists/de-ices

the door mirrors.

► Press this button to activate/de-

activate the function (confirmed

by the indicator lamp coming on/

switching off).

Front demisting/defrosting

This mode allows the windscreen and side

windows to be demisted or defrosted as quickly

as possible.

The function can be activated whatever

the outside temperature may be.The period

of operation depends on the outside

temperature.Demisting/defrosting therefore

switches off automatically to prevent an

excessive consumption of electrical current.

► Press this button to activate/de-

activate the mode (confirmed by

the illumination/ extinction of the

indicator lamp).

► With the engine running, press this button to

activate/deactivate the function (confirmed by

an indicator lamp).

The mode automatically manages the air

conditioning, air flow, air intake and distributes

ventilation optimally to the windscreen and side

windows.

The period of operation depends on the outside

temperature.

The function switches off automatically to

prevent excessive power consumption.

61

Ease of use and comfort

– When the vehicle is not connected and a

recurring programme is active (e.g. from Monday

to Friday), if two temperature pre-conditioning

sequences are run without the vehicle being

used, the programme will be deactivated.

You can set multiple programmes.

Each one is saved in the system.

To optimise the driving range, we recommend

starting a programme while the vehicle is

connected.

Temperature

pre-conditioning

(Rechargeable hybrid or

Electric)

This function allows you to programme the

temperature in the passenger compartment to

reach a pre-defined, non-modifiable temperature

(approx. 21°C) before you enter the vehicle, on

the days and at the times of your choice.

This function is available when the vehicle is

connected or not connected.

Temperature pre-

conditioning (petrol/

remote start)

Programming can also be carried

out from a smartphone using the MY-

PEUGEOT APP application.

For more information on Remotely operable

additional functions, refer to the corresponding

section.

This function allows you to program the

temperature in the passenger compartment to

reach a pre-defined, non-modifiable temperature

(approx. 21°C) before you enter the vehicle, on

the days and at the times of your choice.

The fan noise that occurs during

temperature pre-conditioning is perfectly

normal.

Programming

In the Climate touch screen applica-

tion, select the Preconditioning tab.

The door mirrors are folded when the

temperature pre-conditioning and the ignition

are on.

Programming

In the Climate touch screen applica-

tion, select the Preconditioning tab.

► Press + to add a programme.

► Select the time of entry into the vehicle and

the desired days. Press OK.

Vehicles equipped with an alarm

system

Depending on version, interior volumetric and

anti-tilt monitoring may be reduced.

► Press + to add a program.

► Select the time of entry into the vehicle and

the desired days. Press OK.

► Press ON to activate this programming.

The pre-conditioning sequence begins

approximately 45 minutes before the

programmed time when the vehicle is connected

(20 minutes when it is not connected) and is

maintained for 10 minutes after.

► Press ON to activate this programming.

The pre-conditioning sequence begins

approximately 20 minutes before the

programmed time.

Operating conditions

– The function is only activated when the

ignition is switched off and the vehicle

locked.

– When the vehicle is not connected, the

function is only activated if the battery charge

level is greater than 20% (Rechargeable hybrid)

or 30% (Electric).

This indicator lamp comes on fixed when

a temperature pre-conditioning cycle is

programmed. It flashes when temperature

preconditioning is in progress.

62

Ease of use and comfort

Sun visor

You can set multiple

programmes.

Each one is saved in the system.

Front fittings

3

► With the ignition on, raise the concealing

flap; depending on the version, the mirror is

illuminated automatically.

Programming can also be carried

out from a smartphone using the MY-

PEUGEOT APP application.

This sun visor is also equipped with a ticket

holder.

Glove box

Vehicles equipped with an alarm

system

Depending on version, interior volumetric and

anti-tilt monitoring may be reduced.

► To open the glove box, lift the handle.

With the ignition on, the glove box is lit when

open.

Pre-conditioning can only begin if all doors are

locked, windows and bonnet closed.

Pre-conditioning starts the engine of the petrol

vehicle.

Never drive with the glove box open when

a passenger is at the front. It may cause

injury during sharp deceleration!

Pre-conditioning is limited to a 20min cycle. A

second cycle can only be performed after rolling.

1. Sun visor

2. Glasses holder

12 V accessory socket

3. Coin holder (depending on version)

4. Illuminated glove box

5. Door pockets

6. Storage compartment or i-Toggles

7. Wireless smartphone charger (depending

on version)

8. Storage compartment

Front USB sockets/12 V socket

9. Cup holders

10. Front armrest with storage

11. Rear USB sockets/12 V socket

(depending on version)

► Plug in a 12 V accessory (with a maximum

rated power of 120 W) using a suitable

adapter.

Storage compartment or Smartphone

storage

Observe the maximum power rating to

avoid damaging the accessory.

63

Ease of use and comfort

For best results, use a cable made or approved

by the device manufacturer.

These applications can be managed using the

steering-mounted controls or the audio system

controls.

The charger works with the engine running and

with the Stop & Start system in STOP mode.

Charging is managed by the smartphone.

With the Keyless Entry and Start system, the

charger’s operation may be briefly disrupted

when a door is opened or the ignition is switched

off.

The connection of an electrical device not

approved by PEUGEOT, such as a USB

charger, may adversely affect the operation of

vehicle electrical systems, causing faults such

as poor radio reception or interference with

displays in the screens.

When the USB socket is used, the

portable device charges automatically.

While charging, a message is displayed if the

power drawn by the portable device exceeds

the current supplied by the vehicle.

For more information about how to use this

equipment, refer to the sections describing

the audio and telematics systems.

Charging

USB sockets

► With the charging area clear, place a device

in its centre.

These symbols determine the type of use of a

USB socket:

When the portable device is

detected, the charger’s indicator

lamp lights up green. It remains lit for the whole

time that the battery is being charged.

Power supply and recharging.

Wireless smartphone

charger

Likewise, plus use of smartphone ap-

plications with the touch screen.

The system is not designed to charge

multiple devices simultaneously.

Do not leave metal objects (e.g. coins,

keys, vehicle remote control) in the

charging area while a device is being charged

- Risk of overheating or interrupting the

charging!

This system allows wireless charging of a

portable device such as a smartphone, using the

magnetic induction principle, in accordance with

the Qi 1.1 standard.

The portable device to be charged must be

compatible with the Qi standard, either by design

or by using a compatible holder or shell.

A mat can also be used provided that it is

approved by the Manufacturer.

USB sockets allow the connection of a portable

device.

When using applications for a long time in

combination with wireless charging, some

smartphones may switch to thermal safety

and cause some functions to stop.

The USB socket located at the

front of the centre console also

allows a smartphone to be

connected by Android Auto®

or CarPlay®, enabling certain smartphone

applications to be used on the touch screen.

The charging area is identified by the Qi symbol.

64

Ease of use and comfort

10 speakers incorporating exclusive FOCAL®

technologies offer the pleasure of special

musical experience inside the vehicle:

– 12 channel full active amplification - 690 Watts

Class D booster technology: significant audio

power available at all times despite low power

consumption.

– Polyglass central speaker: sound immersion

and spatialisation.

– Polyglass woofers/mid-range speakers with

TMD suspension: balance, dynamics and

precision of sound.

Checking operation

Front armrest

The state of the indicator lamp allows the

operation of the charger to be monitored.

3

It includes a storage space and is illuminated

when the cover is opened (depending on

version).

State of the

indicator

lamp

Meaning

Opening

Off

Engine switched off.

No compatible devices

detected.

Charging complete.

Compatible portable device

detected.

Fixed green

– Aluminium TNF inverted dome tweeter: optimal

sound dispersion, detailed treble.

Charging.

Flashing

orange

Foreign object detected in the

charging zone.

Portable device not well

centred in the charging zone.

– Subwoofer with high excursion Power

FlowerTM triple coil: deep and controlled

reproduction of low frequencies.

Two customisable listening modes are available:

– "All passengers": an optimised service for each

occupant of the vehicle, both front and rear.

– "Optimised for the front": an immersive and

augmented experience, shared between the

driver and the front passenger.

► Press the lever beneath the cover.

Fixed orange Malfunction of the portable

device's battery meter.

Device battery temperature

too high.

The cover opens in two parts.

Closing

Charger malfunction.

If the indicator lamp is fixed

orange:

– remove the device, then place it back in the

centre of the charging zone.

or

– remove the device and try again in a quarter of

an hour.

If the problem persists, have the system checked

by a PEUGEOT dealer or a qualified workshop.

► Fold back the two parts of the cover.

FOCAL® Hi-Fi system

The vehicle is equipped with a high-fidelity audio

system from the French brand FOCAL®.

65

Ease of use and comfort

1. Front touch-sensitive reading lamps

Mats

Courtesy lamps

Fitting

Non touch-sensitive version

2. Rear touch-sensitive reading lamps

Touch-sensitive reading

lamps

When fitting it on the driver's side, only use

the mountings present on the carpet (a "click"

indicates proper locking).

Reading lamps

It comes on:

► With the ignition on, operate the

corresponding switch.

The other mats are simply laid over the carpet.

– when the vehicle is unlocked.

– when the ignition is switched off.

– when a door is opened.

– when the remote control locking button is

activated, in order to locate the vehicle.

It switches off:

– when the vehicle is locked.

– when the ignition is switched on.

– 30 seconds after the last door is closed.

Removing/refitting

► To remove it on the driver's side, move the

seat backwards and unclip the fasteners.

Do not place anything against the courtesy

lamps.

► To refit it, position the mat and secure it by

pressing down.

► Check that the mat is secured correctly.

Touch version with LED

To avoid any risk of jamming the pedals:

– Only use mats which are suited to the

fixings already present in the vehicle; these

fixings must be used.

– Never fit one mat on top of another.

The use of mats not approved by the

Manufacturer may interfere with access to the

pedals and hinder the operation of the cruise

control/speed limiter.

Interior ambient lighting

The interior ambient lighting casts soft, coloured

lighting in the passenger compartment, when low

lighting conditions are detected.

By default, the colour of the interior ambient

lighting is linked to that of the screens,

depending on the driving mode selected.

The approved mats have two fasteners

located underneath the seat.

66

Ease of use and comfort

Activation/deactivation and adjust-

ment of the brightness are set via the

Settings > Brightness touch screen

application.

Each USB socket is used only to power or

recharge a portable device.

Shark fin antenna

3

Rear armrest

The colour is selected via the Settings >

Customization touch screen application.

(Depending on version)

A ventilation grille is present at the rear of the

roof for cooling the shark fin antenna.

Any ventilation noise produced, with the ignition

on or the engine running, is completely normal.

Rear fittings

12 V accessory socket

► To connect a 12 V accessory (maximum

power: 120 W), lift the cover and plug in a

suitable adaptor.

Third row window blinds

The armrest incorporates two cup holders.

The cup holders have a removable reducer to be

used depending on the diameter of the cans and

cups.

The connection of an electrical device not

approved by PEUGEOT, such as a USB

charger, may adversely affect the operation of

vehicle electrical systems, causing faults such

as poor radio reception or interference with

displays in the screens.

Third row reading lamps

Reading lamps are also

available above third row

seats.

Fitted to the second row windows,they protect

the passenger compartment from the sun's rays.

USB sockets

For more information on Courtesy lamps, refer

to the corresponding section.

► Pull the central tab to unroll the blind.

► Position the blind's clip on the hook.

Always guide the blind slowly,using the

tab,while raising or lowering it.

67

Ease of use and comfort

Load space cover

Boot fittings

When sharp deceleration occurs, objects

placed on the load space cover can turn

into projectiles.

High load retaining net

This removable net allows the entire load volume

behind the front seats to be used up to the

roof when the rear seats are folded. It offers

protection to the occupants when very sharp

braking occurs.

► Fold down the rear seats.

1. Load space cover shelf

2. Bag hooks

3. 12 V (120 W) socket

4. Boot lamp

5. Retaining strap

6. Stowing rings

7. Storage compartments

8. 2-position boot floor or hinged boot carpet

(Rechargeable hybrid or Electric)

Storage well/Tool box under the floor

Hi-Fi amplifier (depending on version)

► Insert the ends of the bar, one after the other,

into fixing points 1 of the roof.

Slots for stocking 1 position boot-floor.

The stowing rings are designed to secure

luggage using different types of retaining

nets or suitable straps.

For more information, contact a PEUGEOT

dealer or a qualified workshop.

68

Ease of use and comfort

Boot lamp

3

It comes on automatically when the boot is

opened and goes off automatically when the

boot is closed.

The lighting time varies according to the

circumstances:

– When the ignition is off, approximately 10

minutes.

– In energy saving mode, approximately 30

seconds.

– With the engine running, unlimited.

To keep it in the inclined position:

► From the high position, lift the floor towards

the load space cover.

► Attach the net’s straps to the lower anchoring

points, located on the fixings of the rear

bench seat backrest.

2-position boot floor

► Engage it in the inclined position in the lateral

stops to secure it in this position.

(Depending on version)

This 2-position floor allows the boot volume to be

optimised using the lateral stops located on the

sides:

– High position (100 kg max.): to obtain a flat

floor up to the front seats, when the rear seats

are folded down.

► Pull on the straps to stretch the net.

Storage well

12 V accessory socket

► Lift the rigid boot floor as far as possible

or lift the hinged boot carpet (depending on

version) to access the storage well.

► To connect a 12 V accessory (maximum

power: 120 W), lift the cover and plug in a

suitable adaptor.

– Low position (150 kg max.): maximum boot

volume.

Depending on version, it includes:

– A temporary puncture repair kit with the tool

kit.

– A spare wheel with the tool kit.

– The traction battery charging cables

(Rechargeable hybrid or Electric).

► Switch on the ignition.

On certain versions, the adjustable boot

floor cannot be fitted in the low position.

The connection of an electrical device not

approved by PEUGEOT, such as a USB

charger, may adversely affect the operation of

vehicle electrical systems, causing faults such

as poor radio reception or interference with

displays in the screens.

To change the height:

► Lift and pull the floor towards you using its

central handle, then use the lateral stops to

move it.

► Push the floor all the way forwards to place it

in the desired position.

69

Download User Manual App

Ease of use and comfort for Your Peugeot 5008 SUV Third Generation (2024-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals