Ease of use and comfort
– When the vehicle is not connected and a
recurring programme is active (e.g. from Monday
to Friday), if two temperature pre-conditioning
sequences are run without the vehicle being
used, the programme will be deactivated.
You can set multiple programmes.
Each one is saved in the system.
To optimise the driving range, we recommend
starting a programme while the vehicle is
connected.
Temperature
pre-conditioning
(Rechargeable hybrid or
Electric)
This function allows you to programme the
temperature in the passenger compartment to
reach a pre-defined, non-modifiable temperature
(approx. 21°C) before you enter the vehicle, on
the days and at the times of your choice.
This function is available when the vehicle is
connected or not connected.
Temperature pre-
conditioning (petrol/
remote start)
Programming can also be carried
out from a smartphone using the MY-
PEUGEOT APP application.
For more information on Remotely operable
additional functions, refer to the corresponding
section.
This function allows you to program the
temperature in the passenger compartment to
reach a pre-defined, non-modifiable temperature
(approx. 21°C) before you enter the vehicle, on
the days and at the times of your choice.
The fan noise that occurs during
temperature pre-conditioning is perfectly
normal.
Programming
In the Climate touch screen applica-
tion, select the Preconditioning tab.
The door mirrors are folded when the
temperature pre-conditioning and the ignition
are on.
Programming
In the Climate touch screen applica-
tion, select the Preconditioning tab.
► Press + to add a programme.
► Select the time of entry into the vehicle and
the desired days. Press OK.
Vehicles equipped with an alarm
system
Depending on version, interior volumetric and
anti-tilt monitoring may be reduced.
► Press + to add a program.
► Select the time of entry into the vehicle and
the desired days. Press OK.
► Press ON to activate this programming.
The pre-conditioning sequence begins
approximately 45 minutes before the
programmed time when the vehicle is connected
(20 minutes when it is not connected) and is
maintained for 10 minutes after.
► Press ON to activate this programming.
The pre-conditioning sequence begins
approximately 20 minutes before the
programmed time.
Operating conditions
– The function is only activated when the
ignition is switched off and the vehicle
locked.
– When the vehicle is not connected, the
function is only activated if the battery charge
level is greater than 20% (Rechargeable hybrid)
or 30% (Electric).
This indicator lamp comes on fixed when
a temperature pre-conditioning cycle is
programmed. It flashes when temperature
preconditioning is in progress.
62
English 