Download User Manual App

Quickly access user manual for free!

Ease of use and comfort -> Second row seats for Your Peugeot 5008 SUV Third Generation (2024-2025)

Ease of use and comfort  
– Once the vehicle speed exceeds 6 mph (10  
km/h).  
– When the engine is switched off.  
To ensure optimum visibility while  
3
manoeuvring, the mirror automatically  
brightens when reverse gear is engaged.  
The system is inoperative if the load in the  
boot exceeds the height of the load space  
cover or if the load space cover has items  
placed on it.  
It can be activated/deactivated in the  
Settings > Vehicle touch screen ap-  
plication.  
From the inside, with the ignition on, place  
control A in the central position.  
Pull control A backwards.  
Lock the vehicle from the outside.  
The inclination of the mirrors is different  
between the two sides. It is more important  
on the passenger side to show more of the  
ground.  
Second row seats  
If the mirrors are folded using control A,  
they will not unfold when the vehicle is  
unlocked.  
Rear head restraints  
Electrochrome interior rear  
view mirror  
Electric unfolding  
From outside: unlock the vehicle.  
From inside: with the ignition on, place  
control A in the central position and then pull  
it rearwards.  
The automatic folding/unfolding of the door  
mirrors is configured in the Settings >  
Vehicle touch screen application.  
Before using an automatic car wash, fold the  
mirrors.  
They have two positions:  
– A high position, for when the seat is in use:  
Pull the head restraint fully up.  
Automatic tilting in reverse gear  
– A low position, for stowing, when the seat is  
Depending on version, this function allows you to  
automatically tilt the mirrors downwards to assist  
with parking manoeuvres in reverse gear.  
With the engine running, on engaging reverse  
gear, the mirror glasses tilt downwards.  
They each return to their original positions:  
– A few seconds after coming out of reverse  
gear.  
not in use:  
Press the lug A to release the head restraint  
The electrochrome system uses a sensor that  
detects the level of exterior brightness and that  
coming from the rear of the vehicle, in order to  
automatically and gradually switch between day  
and night usage.  
and push it down.  
The rear head restraints can be removed.  
Removing a head restraint  
Release the backrest using control 1.  
53  
Ease of use and comfort  
Tilt the backrest slightly forwards.  
Pull the head restraint fully up.  
When repositioning, lift up the backrest fully  
until it locks.  
Press the lug A to release the head restraint  
Repositioning the backrests  
and remove it completely.  
First check that the outer seat belts are  
lying vertically flat alongside the backrest  
latching rings.  
Never drive with passengers seated at  
the rear when the head restraints are  
removed; the head restraints should be in  
place and in the high position.  
The head restraint for the centre seat  
and those for the outer seats are not  
interchangeable.  
Press the backrest release grip 1.  
Guide the backrest 2 down to the horizontal  
position.  
When the backrest is released, the red  
indicator in the release grip is visible.  
Central backrest  
Folding the backrests  
The central section of the backrest may be  
Put the backrest 2 in the upright position and  
push it firmly to latch it home.  
folded down independently of the side sections.  
Manoeuvring the backrests should only be  
done when the vehicle is stationary.  
Check that the red indicator is no longer  
visible in the release grip 1.  
First steps:  
Ensure that the outer seat belts were not  
trapped during the operation.  
Lower the head restraints.  
If necessary, move the front seats forward.  
Please note: an incorrectly latched  
backrest compromises the safety of  
passengers in the event of sudden braking or  
an accident.  
The contents of the boot may be thrown  
forwards - risk of serious injury!  
Check that no person or object might  
interfere with the folding of the backrests  
(e.g. clothing, luggage).  
Check in advance that the rear armrest is  
not folded down and that the central head  
restraint is not raised.  
Check that the seat belts are free, not  
engaged in the buckles. Release them so  
that the backrest can be moved.  
From inside the passenger compartment or  
from the boot, pull on the strap to release.  
Fold the backrest onto the seat cushion.  
54