Get Ease of use and comfort -> Front seats Guide for Peugeot 5008 SUV Third Generation (2024-2025)

Ease of use and comfort

Removing a head restraint

After adjustment, try to move the seat

backwards and forwards to ensure that the

seat is properly locked in place.

Front seats

Before moving the seat backwards, ensure

that there is no person or object that might

prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the floor behind the seat.

► Pull the head restraint fully up.

► Press lug A to release the head restraint and

raise it fully.

Height

► Stow the head restraint securely.

Refitting a head restraint

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint fully down.

Front head restraints

► Press the lug A to release the head restraint

and push it down.

Adjusting the height

► Pull the control upwards to raise or push

it downwards to lower, until you obtain the

position required.

► Adjust the height of the head restraint.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

Backrest angle

Manually-adjustable seats

Longitudinal

Upwards:

► Pull the head restraint up to the desired

position; you can feel the head restraint

clicking into position.

► Turn the knob to obtain the desired angle.

Downwards:

"AGR" certified seats

► Depending on equipment, press lug A or

button B and then, while still pressing, lower

the head restraint.

In addition to the manual adjustments, this seat

features manual adjustment of the seat cushion

length, electric adjustment of the seat cushion

angle and the electric lumbar adjustment.

► Raise the control bar and slide the seat

forwards or backwards.

The head restraint is correctly adjusted

when its upper edge is level with the top

of the head.

► Release the control bar to lock the seat in

position on one of the notches.

Ease of use and comfort

The control allows independent adjustment of

the depth and vertical position of the lumbar

support.

Seat cushion length

Cushion height and angle

►

Press and hold the front or rear of

the control to increase or reduce the

lumbar support.

► Press and hold the top or bottom of the

control to raise or lower the lumbar support

area.

► Pull the handle forwards to release the

cushion, then move the front part of the

cushion forwards or backwards.

► Tilt the rear of the control upwards or

downwards to obtain the required height.

Electrically-adjustable seats

► Tilt the front of the control upwards or

downwards to obtain the required angle.

Seat cushion angle

For safety reasons, seat adjustments

must only be made when the vehicle is

stationary.

Backrest angle

To avoid draining the battery, carry out

these adjustments with the engine running.

This seat also features the manual adjustment

of the seat cushion length and electric lumbar

support adjustment mentioned previously.

► Press and hold the front or rear of the button

to raise or lower the front part of the seat

cushion.

Longitudinal

► Tilt the control forwards or rearwards.

Memorising driving

positions

Electric lumbar adjustment

Associated with the electrically-adjusted driver’s

seat, this function allows two driving positions

to be memorised, to make these adjustments

easier if there are frequent driver changes.

It records the electric adjustments made to the

seat and door mirrors.

► Push the control forwards or backwards to

slide the seat.

Ease of use and comfort

Up to 3 keys can be set up. Memorising a

new position with one key cancels the previous

position linked to this key.

Using buttons 1/2/M

► Approach the vehicle with the electronic key

on you.

The driver's seat is moved when the driver's

door is opened.

Activation/Deactivation

In both cases

The Smart Seat function is config-

ured in the Settings > Vehicle touch

screen application.

An audible signal sounds when adjustment is

complete.

You can interrupt the current movement by

pressing button M, 1 or 2 or by using one of the

seat adjustment controls.

A stored position cannot be recalled while

driving.

► Then select Vehicle Access > Smart Seat.

► Press to activate/deactivate.

► Enter the vehicle and switch the ignition on.

► Adjust the seat and the door mirrors.

► Press button M, then press button 1 or 2

Recalling a stored position

within 4 seconds.

The recalling of stored positions is deactivated

45 seconds after switching off the ignition.

An audible signal confirms the memorisation.

Up to 3 keys can be set up. Memorising a

new position with one key cancels the previous

position linked to this key.

While the seat is moving, take care

that no person or object hinders the

automatic movement of the seat.

Heated and/or ventilated

seats

Using the Smart Seat function

With the ignition on or engine running

The heating function is active only with

the engine running and when the outside

temperature is below 20°C.

To recall the corresponding position using the

buttons:

Activation/Deactivation

► Press button 1 or 2.

When unlocking the vehicle with the

electronic key

Press the centre button of the lumbar

adjustment controls.

To recall the corresponding position using the

Smart Seat function:

The function is previously activated.

► Press the unlock button of the electronic key.

► Enter the vehicle and switch the ignition on.

► Adjust the seat and the door mirrors.

► Press button M.

► Within 5 seconds after pressing button M,

press unlock button of the electronic key

during at least 2 seconds.

Press the Seats application.

► Press the driver's door handle with the

electronic key on you.

► Select the Heating Functions or Ventilated

Seats tab.

► Select the driver or passenger seat.

An audible signal confirms the memorisation.

Ease of use and comfort

The corresponding page is displayed with the

last memorised settings.

► Select the driver or passenger seat.

Prolonged use of heated seats is not

recommended for people with sensitive

skin.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

To keep the heated pad intact and to prevent

a short circuit:

By default, the initial setting is in the middle

position.

If the settings are suitable, press to

activate/deactivate the function in the

Seat application.

► Press buttons "+" or "-", or move the slider to

the desired setting.

► Slide to the left/right for quick and easy

deflation/inflation of the adaptive bolster.

If no action is taken, the display returns to its

initial state.

– Do not place heavy or sharp objects on the

seat.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat is

damp.

The function status is not memorised when the

ignition is switched off.

The modifications are taken into account

immediately and are visible on the animation of

the corresponding seat in the page.

Changing settings

► In the Heating Functions or Ventilated

Seats page, select the relevant seat.

The setting can be reduced to the

minimum ("1"), but the function is not

completely disabled.

► Select an intensity from the three preset

levels: "1" (Low), "2" (Normal) or "3" (High).

Adaptive bolsters

The settings for this function can be stored with

the buttons M/2/1 or with the electronic key.

For more information on Memorising driving

positions, refer to the corresponding section.

The settings are memorised when the ignition is

switched off.

This function provides better lateral and lumbar

support for the driver and front passenger.

The position is set by inflating/deflating the

adaptive bolster using the corresponding page

in the touch screen.

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function off; reducing electrical

consumption in turn decreases energy

consumption.

Malfunction

In the event of a malfunction, a message is

displayed in the touch screen.

The message may be displayed when opening

the Bolster tab or during setting the position.

Go to a PEUGEOT dealer or a qualified

workshop.

It is possible to store the position setting and

also to recall the stored position later.

Settings

Press the centre button of the lumbar

adjustment controls.

Press the Seats application.

► Select the Bolster tab.

Download User Manual App

Ease of use and comfort -> Front seats for Your Peugeot 5008 SUV Third Generation (2024-2025)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals