Ease of use and comfort
1. Front touch-sensitive reading lamps
Mats
Courtesy lamps
Fitting
Non touch-sensitive version
2. Rear touch-sensitive reading lamps
Touch-sensitive reading
lamps
When fitting it on the driver's side, only use
the mountings present on the carpet (a "click"
indicates proper locking).
Reading lamps
It comes on:
► With the ignition on, operate the
corresponding switch.
The other mats are simply laid over the carpet.
– when the vehicle is unlocked.
– when the ignition is switched off.
– when a door is opened.
– when the remote control locking button is
activated, in order to locate the vehicle.
It switches off:
– when the vehicle is locked.
– when the ignition is switched on.
– 30 seconds after the last door is closed.
Removing/refitting
► To remove it on the driver's side, move the
seat backwards and unclip the fasteners.
Do not place anything against the courtesy
lamps.
► To refit it, position the mat and secure it by
pressing down.
► Check that the mat is secured correctly.
Touch version with LED
To avoid any risk of jamming the pedals:
– Only use mats which are suited to the
fixings already present in the vehicle; these
fixings must be used.
– Never fit one mat on top of another.
The use of mats not approved by the
Manufacturer may interfere with access to the
pedals and hinder the operation of the cruise
control/speed limiter.
Interior ambient lighting
The interior ambient lighting casts soft, coloured
lighting in the passenger compartment, when low
lighting conditions are detected.
By default, the colour of the interior ambient
lighting is linked to that of the screens,
depending on the driving mode selected.
The approved mats have two fasteners
located underneath the seat.
66
English 