Download User Manual App

Quickly access user manual for free!

Practical information -> Electrified vehicles - General recommendations for Your Peugeot 5008 SUV Third Generation (2024-2025)

Practical information  
In case of low level of fluid in the cooling  
tank, the refilling shall only be performed in  
a qualified and trained workshop to verify that  
the leakage is not in the traction battery.  
Any intervention on the high voltage system  
must be carried out by qualified persons in  
workshops qualified and approved to carry  
out this type of work.  
Damage to the vehicle or the traction battery  
could result in the leakage of toxic gases or  
fluids either immediately or later. PEUGEOT  
recommends that you:  
– Always inform the fire and emergency  
services in the event of an incident, warning  
that the vehicle is equipped with a traction  
battery.  
– Never touch the liquids leaking from the  
traction battery.  
Electrified vehicles  
- General  
recommendations  
These recommendations and general  
information concern electrified vehicles of the  
type: hybrid, rechargeable hybrid and electric.  
Turn the filler cap to the left, remove it  
and place it on its support on the filler flap  
(depending on version).  
High voltage system  
Insert the filler nozzle and push it in as far as  
possible before starting to refuel (to minimise  
the risk of splashing).  
High voltage system voltage is dangerous  
and can cause burns or other injuries or  
even fatal electric shock.  
Since damage to high voltage components is  
not visible, PEUGEOT recommends that you:  
– Never touch the components, damaged  
or not, and never let your jewelry or other  
metallic objects come into contact with these  
components.  
– Never work on the high voltage cables  
(purple or orange) or on any other high  
voltage component marked with the Electric  
risk label. Any intervention on the high  
voltage system must be carried out by  
qualified persons in workshops qualified and  
approved to carry out this type of work.  
– Never damage, modify or remove the  
high voltage cables (purple or orange) or  
disconnect them from the high voltage  
network.  
Fill the tank.  
Do not continue after the nozzle’s third  
cutout. Doing so may cause malfunctions.  
– Do not inhale the gases emitted by the  
traction battery which are toxic.  
– Move away from the vehicle in the event of  
incident or accident, the gases emitted being  
flammable and could cause a fire.  
Put the filler cap back in place and turn it to  
the right (depending on version).  
Push the fuel filler flap to close it.  
The vehicle is fitted with a catalytic converter,  
which helps to reduce the level of harmful  
emissions in the exhaust gases.  
For petrol engines, you must use unleaded  
fuel.  
The filler neck is narrower, allowing only  
unleaded petrol nozzles to be inserted.  
If you have put in the wrong fuel for  
the vehicle, you must have the fuel tank  
drained and filled with the correct fuel  
before starting the engine.  
– Never open, modify or remove the cover of  
the traction battery.  
– Never work with cutting and forming tools or  
heat sources near high voltage components  
and cables.  
170