Download User Manual App

Quickly access user manual for free!

Practical information -> Rechargeable hybrid system for Your Peugeot 5008 SUV Third Generation (2024-2025)

Practical information  
8. Never use this charging cable with an  
extension cable, a multi-plug socket, a  
conversion adaptor or on a damaged  
electrical socket.  
9. Do not unplug the plug from the wall as a  
means of stopping charging.  
10. Immediately stop charging, by locking  
and then unlocking the vehicle using the  
remote control key, if the charging cable  
or wall socket feel burning hot to the  
touch.  
Manual reset procedure  
The control unit can be reset by simultaneously  
disconnecting the charging connector and the  
wall socket.  
Then, reconnect the wall socket first. For more  
information, refer to the handbook.  
The rechargeable hybrid powertrain uses  
a voltage of between 240 V and 400 V.  
This system may be hot both when the  
ignition is on and after switching it off.  
Comply with the warning messages shown  
on the labels, particularly inside the charging  
flap.  
Control unit label - Recommendations  
Refer to the handbook before use.  
11. This charging cable includes components  
liable to cause electrical arcing or sparks.  
Do not expose to flammable vapours.  
12. Only use this charging cable with  
PEUGEOT vehicles.  
13. Never plug the cable into the wall socket  
(or unplug it) with wet hands.  
14. Do not force the connector if it is locked  
into the vehicle.  
Traction battery  
The Li-ion (Lithium-ion) traction battery stores  
the electrical energy needed to propel the  
vehicle.  
1. Incorrect use of this charging cable  
may result in fire, property damage and  
serious injury or death by electrocution!  
2. Always use a correctly earthed power  
socket, protected by a 30 mA residual  
current device.  
3. Always use an electrical socket protected  
by a circuit-breaker appropriate for the  
electrical circuit’s current rating.  
4. The weight of the control unit must not be  
borne by the electrical socket, plug and  
cables.  
5. Never use this charging cable if it is  
defective or in any way damaged.  
6. Never attempt to repair or open this  
charging cable. It contains no repairable  
parts - replace the charging cable if it is  
damaged.  
It is located in the boot.  
The traction battery's range varies depending  
on the type of driving, the route, the use of  
thermal comfort equipment and the ageing of its  
components.  
Rechargeable hybrid  
system  
Electrical system  
The traction battery ageing depends on  
several factors, such as climatic conditions  
and the distance travelled.  
For more information, refer to  
the General recommendations on  
electrified vehicles and the Specific  
recommendations on rechargeable hybrid  
or electric vehicles.  
The electrical circuit of the rechargeable hybrid  
system is identified by orange cables and its  
components are marked with this symbol:  
7. Never immerse this charging cable in  
water.  
176  
Practical information  
The charging cable supplied with the vehicle is  
compatible with the electrical installations of the  
country of sale. If you are travelling abroad, refer  
to the following tables to check the compatibility  
of local electrical installations with the charging  
cable.  
Charging flap  
7
The charging flap is located on the rear left-hand  
side of the vehicle.  
Contact a PEUGEOT dealer or a qualified  
workshop to obtain the appropriate charging  
cable(s).  
Status of  
Meaning  
charging in-  
dicator lamp  
Fixed white  
Identification labels on charging sockets/  
connectors  
Welcome lighting when flap is  
opened.  
Fixed blue  
Flashing  
green  
Deferred charging.  
Charging in progress.  
Identification labels are affixed to the vehicle,  
charging cable and charger to inform the user  
about which device needs to be used.  
Fixed green  
Fixed red  
Charging complete.  
Malfunction.  
In case of impact, even light, against the  
charging flap, do not use it.  
Do not dismantle or modify the charging  
connector - risk of electrocution and/or fire!  
Contact a PEUGEOT dealer or a qualified  
workshop.  
1. Nozzle locking indicator lamp Fixed red:  
nozzle correctly positioned and locked into  
the connector.  
Flashing red: nozzle incorrectly positioned  
or locking not possible.  
2. Deferred charging activation button  
3. Charging indicator lamp  
Charging cables, sockets  
and chargers  
The meaning of each identification label is as  
follows:  
The traction battery can be charged using  
several different types of cables.  
4. Charging connector  
Identification label  
Location  
Configuration  
Power type/Voltage range  
Charging connector (vehicle side)  
Charging socket (charger side)  
TYPE 2  
TYPE 2  
AC < 480 Vrms  
C
C
AC < 480 Vrms  
177  
Practical information  
Cable type  
Mode 2 charging cable with integrated control  
unit  
Compatibility  
Conventional electrical socket (depending on  
country).  
Specifications  
Charge limited to a maximum of 10 A.  
"Green'Up" type socket.  
Charge limited to a maximum of 16 A.  
Identification label C on the charging connector  
(vehicle side).  
Mode 3 charging cable  
Accelerated charging unit socket.  
Charge limited to a maximum of 32 A.  
Wallbox accelerated charging unit.  
Identification labels C on the charging connector  
(vehicle side) and on the socket (charger side).  
178