Get QUICK HELP -> Changing a Bulb Guide for Peugeot Bipper Van First Generation (2007-2018)

Changing a bulb

CHANGING A BULB

Types of bulb

Various types of bulb are fitted on your

vehicle.

to remove them:

1. Type A

entirely glass bulb: pull gently as it is

fitted by pressure.

2. Type B

Bayonet bulb: press on the bulb then turn

it anticlockwise.

3. Type C

Cylindrical bulb: move aside the contacts.

4. Type D - E

Front lamps

Open the bonnet. to access the bulbs, reach

behind the headlamp unit.

Remove the protective covers to gain

access to the bulbs.

Halogen bulb: release the retaining

spring from its housing.

Carry out the operations in reverse order to

refit each bulb.

High pressure washing

When using this type of washing on

stubborn dirt, do not persist very long on

the headlamps, or on other lamps and their

edges to avoid damaging their coating and

seals.

9

Changing a bulb

4 - Direction indicators

Type B, PY 21 W - 21 W amber

-

turn the bulb holder a quarter turn

anticlockwise.

Remove the bulb by pressing it lightly

while turning it anticlockwise.

Change the bulb.

If you encounter any difficulty, consult a

PeugeOt dealer or a qualified workshop.

1 - Dipped beam headlamps

3 - Main beam headlamps

5 - Foglamps

Type D, H4 - 55 W

Type E, H1 - 55 W

-

Remove the cover by turning it

anticlockwise.

-

Remove the cover by turning it

anticlockwise.

Contact a PeugeOt dealer or a qualified

workshop.

-

Disconnect the electrical connector.

-

Disconnect the electrical connector.

When each operation has been

completed, check the operation of the

lamps.

Release the retaining spring by pressing

on the two clips.

Release the retaining spring by pressing

on the two clips.

-

Change the bulb taking care to align the

metal part with the grooves on the lamp.

-

Remove the bulb holder.

Change the bulb taking care to align the

metal part with the groove on the lamp.

2 - Sidelamps

Type A, W 5 W - 5 W

-

Remove the cover by turning it

anticlockwise.

Pull the bulb holder to gain access to the

bulb.

Change the bulb.

Changing a bulb

Direction indicator side repeaters

Front/rear courtesy lamps

Type A, WY 5 W - 5 W amber

Type C, 12 V 10 W - 10 W

-

Push the repeater rearwards and release it.

-

Release the courtesy lamp using a

screwdriver.

-

Support the connector and turn the bulb

holder a quarter of a turn to the left.

Remove the cover to gain access to

the bulb.

-

turn the bulb a quarter of a turn to

the left.

Change the bulb moving aside the

two contacts.

-

Pull the bulb then change it.

ensure that the new bulbs are secured

correctly between the two contacts.

When refitting, engage the repeater

rearwards then move it forwards.

-

Close the protective flap.

Fix the courtesy lamp in its housing and

ensure that it is secured correctly.

9

Changing a bulb

-

Identify the faulty bulb then open the rear

doors.

unscrew the two screws using the

screwdriver supplied in the tool kit

(behind the driver's seat) and extract the

bulb holder.

-

Release the lamp unit.

Disconnect the electrical connector.

Remove the support by moving aside the

tabs.

-

Change the bulb.

Rear lamps

Number plate lamps

On the tailgate

Type A, C 5 W - 5 W

For further information concerning the bulbs,

-

unclip the transparent cover using

the screwdriver supplied in the tool kit

(behind the driver's seat) and extract the

bulb holder.

refer to the table "types of bulb".

1. Brake lamps

Type B, P21 W - 21 W

2. Direction indicators

Type B, PY 21 W - 21 W amber

3. Reversing lamps

-

Change the bulb by moving aside the two

contacts.

ensure that the new bulbs are secured

correctly between the two contacts.

Type B, P21 W - 21 W

4. Sidelamps/Foglamps

Type B, P4/21 W - 4 W/21 W

Replace the plastic lens and press on it.

On the hinged rear doors

Changing a bulb

Third brake lamp

On the hinged rear doors

On the tailgate

Type B, W 5 W - 5 W (4 bulbs)

Type B, W5W - 5W (5 bulbs)

-

unclip the transparent cover using the

-

Open the tailgate.

screwdriver located in the tool kit.

-

Remove the two cover retaining screws,

then the cover.

-

Disconnect the electrical connector.

Remove the bulb holder by squeezing the

two tabs.

-

Remove the bulb holder by squeezing the

two tabs.

-

Remove the faulty bulb.

Change the bulb.

-

Remove the faulty bulb.

Change the bulb.

If you encounter any difficulty, consult a

PeugeOt dealer or a qualified workshop.

9

QUICK HELP -> Changing a Bulb for Your Peugeot Bipper Van First Generation (2007-2018)

Related Topics

QUICK HELP

Popular Owner Manuals

Latest Owner Manuals