Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> Memorising speeds for Your Peugeot Rifter 4 Door 2003-2017

Driving  
Malfunction  
The cruise control operates by day and  
night, in fog or moderate rainfall.  
The system is not intended for the  
following situations:  
However, it is strongly recommended that  
you always adapt the speed and the safety  
distance in relation to the vehicles ahead,  
according to the driving conditions, the  
weather and the road surface.  
Use the cruise control only where  
the driving conditions allow running  
at a constant speed and keeping an  
adequate safety distance.  
Do not activate the cruise control in urban  
areas where pedestrians are likely to  
cross the road, in heavy traffic (except for  
versions with EAT8 gearbox), on winding  
or steep roads, on slippery or flooded  
roads, when there is snowfall, if the  
windscreen is damaged or when the brake  
lamps have failed.  
In certain circumstances, it may not  
be possible for the speed setting to be  
maintained or even attained: loaded  
vehicle, ascending a steep hill, etc.  
-
if the front end of the vehicle has  
been modified (addition of long-range  
headlamps, painting of the front  
bumper),  
driving on a racing circuit,  
running on a rolling road,  
use of snow chains, non-slip covers or  
studded tyres.  
If the cruise control  
malfunctions, dashes are  
displayed instead of the  
cruise control speed setting.  
-
-
-
If this warning lamp comes  
on, accompanied by an  
alert message and an  
audible signal, this confirms  
a malfunction.  
The use of mats not approved by  
PEUGEOT may interfere with the  
operation of the cruise control.  
To avoid any risk of jamming the pedals:  
Have the system checked by a PEUGEOT  
dealer or a qualified workshop.  
-
-
ensure that the mat is secured  
correctly,  
never place one mat on top of another.  
The adaptive cruise control deactivates  
automatically if the use of a "space-saver"  
type spare wheel is detected or if there is  
a malfunction on the lateral brake lamps or  
trailer brake lamps (for approved trailers).  
The following situations may interfere with  
the operation of the system or prevent it  
from working:  
-
-
driving on a winding road,  
poor visibility (inadequate street  
lighting, falling snow, heavy rain, dense  
fog, etc.),  
dazzle (headlamps of an oncoming  
vehicle, low sun, reflections on a damp  
road, leaving a tunnel, alternating  
shade and light, etc.),  
Memorising speeds  
Linked to the speed limiter and programmable  
cruise control only, this function allows speed  
limits to be registered which will then be  
-
suggested as settings for these two systems.  
-
camera obstructed (mud, frost, snow,  
condensation, etc.).  
In these situations, detection performance  
may be reduced.  
154  
Driving  
You can memorise several speed settings for  
each system.  
By default, some speed settings are already  
memorised.  
Active Safety Brake  
with Distance Alert and  
Intelligent emergency  
braking assistance  
This system is designed to assist the  
driver and improve road safety.  
It is the driver's responsibility to  
continuously monitor the state of the  
traffic, observing the driving regulations.  
This system does not replace the need for  
vigilance on the part of the driver.  
As a safety measure, the driver must  
only modify the speed settings when  
stationary.  
As soon as the system detects a potential  
obstacle, it prepares the braking circuit in  
case automatic braking is needed. This  
may cause a slight noise and a slight  
sensation of deceleration.  
This system allows:  
-
the driver to be warned that their vehicle is  
at risk of collision with the vehicle in front,  
a collision to be prevented, or its severity to  
be limited, by reducing the vehicle's speed.  
Changing a speed setting  
From the Driving/Vehicle menu of  
the touch screen, select "Driving  
functions" then "Memorised speed  
settings".  
-
This system is a driving aid that includes three  
functions:  
Deactivation/Activation  
By default, the system is automatically  
activated at every engine start.  
-
Distance Alert (alert if there is a risk of  
collision),  
"MEM" button  
-
-
Intelligent emergency braking assistance,  
Active Safety Brake (automatic emergency  
braking).  
6
The system can be deactivated or  
activated via the vehicle settings  
menu.  
With this button, you can select a memorised  
speed setting to use with the speed limiter or  
the programmable cruise control.  
Deactivation of the system is  
signalled by the illumination of this  
indicator lamp, accompanied by the  
display of a message.  
For more information on the Speed limiter or  
Cruise control, refer to the associated section.  
The vehicle has a camera located at the top of  
the windscreen.  
155