Get Driving -> Programmable cruise control Guide for Peugeot Rifter 4 Door 2003-2017

Driving

The use of mats not approved by

PEUGEOT may interfere with the

operation of the speed limiter.

The cruise control remains active after

changing gear, regardless of the gearbox

type, on vehicles fitted with Stop & Start.

To avoid any risk of jamming the pedals:

Once the speed of the vehicle returns to

the programmed setting, the speed limiter

functions again: the display of the programmed

speed setting becomes fixed again.

ensure that the mat is positioned

correctly,

never fit one mat on top of another.

The operation of the cruise control can be

temporarily interrupted (pause):

by pressing control 4 or by pressing the

brake pedal,

Switching off

automatically, if operation of the dynamic

stability control system is triggered.

F Turn thumbwheel 1 to position "0". The

display of information related to the speed

limiter disappears.

Programmable cruise

control

Switching off the ignition cancels any

programmed speed setting.

System which automatically

maintains the cruising speed of the

vehicle at a setting programmed by

the driver, without any action on the

accelerator pedal.

Malfunction

The cruise control system is a driving aid

that cannot, in any circumstances, replace

the need to observe speed limits, nor the

need for vigilance on the part of the driver.

As a safety measure, you are advised to

keep your feet near the pedals at all times.

The cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

With a manual gearbox, it requires the

engagement of third gear or higher.

With an automatic gearbox, it requires the

engagement of the selector in mode D or of

second gear or higher in mode M.

Flashing dashes indicate a fault with the speed

limiter.

Have it checked by a PEUGEOT dealer or

a qualified workshop.

144

Driving

Steering mounted control

Displays in the instrument panel Switching on/pausing

F Turn the thumbwheel 1 to the "CRUISE"

position to select cruise control mode; the

function is paused.

1. Select cruise control mode.

2. Use the current speed as the speed

setting/decrease the speed setting.

3. Use the current speed as the speed

F To start the cruise control and set a cruise

speed, once the vehicle has reached the

desired speed, press button 2 or 3; the

current speed of your vehicle becomes the

cruise speed setting.

setting/increase the speed setting.

4. Pause/Resume cruise control.

5. Depending on version:

Display of speed thresholds in the memory

with the programmable cruise control

You can release the accelerator pedal.

Use the speed suggested by the Speed

Limit recognition and recommendation.

For more information on Memorising speeds

or on the Speed Limit recognition and

recommendation, refer to the corresponding

sections.

6. Cruise control mode selection indication.

7. Cruise control pause/resume indication.

F Pressing button 4 temporarily interrupts

operation of the system (pause).

F Pressing button 4 again restores operation

of the cruise control (ON).

8. Programmed speed setting value.

9. Speed suggested by the Speed Limit

recognition and recommendation.

145

Driving

To modify the cruise speed setting using

the speed suggested by the Speed Limit

recognition and recommendation system:

F the speed suggested is displayed in the

instrument panel,

F make a first press on button 5; a message

is displayed to confirm the memorisation

request,

Modifying the cruise speed

setting

The cruise control must be active.

Once the vehicle has returned to the

programmed speed, the cruise control takes

over again: the display of the programmed

speed setting becomes steady again.

To modify the cruise speed setting from the

current speed of the vehicle:

F in steps of +/- 1 mph (km/h), make

successive short presses on button 2 or 3,

F continuously, in steps of +/- 5 mph (km/h),

press and hold button 2 or 3.

F press button 5 again to save the suggested

speed.

When descending a steep hill, the cruise

control system cannot prevent the vehicle

from exceeding the programmed speed.

You may have to brake to control the

speed of your vehicle. In this case, the

cruise control is automatically paused.

To activate the system again, with the

speed of the vehicle above 25 mph

(40 km/h), press button 4.

The speed displays immediately in the

instrument panel as the new speed setting.

Take care: pressing and holding button

2 or 3 results in a rapid change in the

speed of your vehicle.

Temporarily exceeding the

programmed speed

If needed (for overtaking, etc.) it is possible to

exceed the programmed speed by pressing the

accelerator pedal.

As a precaution, it is recommended

that the cruise speed chosen be close

to the current speed of your vehicle, so

as to avoid any sudden acceleration or

deceleration of the vehicle.

Switching off

F Turn thumbwheel 1 to position "0". The

display of information related to the cruise

control disappears.

To modify the cruise speed setting using

memorised speed settings and from the touch

screen:

F press button 5 to display the memorised

speed settings,

F press the button for the desired speed

setting.

The selection screen closes after a few

moments.

The cruise control is temporarily overridden

and the programmed speed setting flashes.

To return to the programmed speed, simply

release the accelerator pedal.

This setting becomes the new cruise speed.

146

Download User Manual App

Driving -> Programmable cruise control for Your Peugeot Rifter 4 Door 2003-2017

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals