2016-2026 Peugeot Traveller Van In the event of a breakdown -> Warning triangle / Tool box User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In the event of a breakdown -> Warning triangle / Tool box for Your Peugeot Traveller Van First Generation (2016-2026)

In the event of a breakdown  
Warning triangle (stowing)  
Tool box  
Access  
This safety equipment should be used in  
Placing the triangle in the  
road  
addition to the hazard warning lamps.  
Its presence in the vehicle is mandatory.  
Before leaving your vehicle to set up  
and install the triangle, switch on the  
hazard warning lamps and put on your  
high visibility vest.  
The tool box is located under the left-hand front  
seat.  
F
Place the triangle behind the vehicle, as  
required by the legislation in force in your  
country.  
Refer to the manufacturer's instructions on  
unfolding and assembly supplied with the  
triangle.  
The triangle is available as an  
accessory; contact a PeugeoT dealer  
or a qualified workshop.  
As a safety measure, the bars 1 and  
2 prevent the box escaping from its  
housing, if it is not correctly secured.  
282  
In the event of a breakdown  
F
To take it past bar 1, raise the box slightly  
then push it fully in.  
Opening  
Removing  
F
F
Press the latches A and slide them inwards  
to release the box.  
Lift the box slightly then pull it as far as it  
will go to take it past bar 1.  
F
unclip the fixings B on the cover, then  
open it for access to the tools.  
F
once the box is fully home in its housing,  
push it against the floor carpet then slide  
the latches A outwards to secure it.  
Stowing  
F
Refit the cover on the box and clip the  
fixings B.  
Pull on the box to check that it is secure  
in its housing.  
8
F
F
offer up the box with the front inclined  
upwards.  
To take it past bar 2, push the box in and  
F
Then, lift the box upwards to take it past  
bar 2.  
down.  
283  

Related Topics

Popular Owner Manuals