1999-2006 Seat Leon 4 Door Handling instructions -> Instrument panel menus User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Handling instructions -> Instrument panel menus for Your Seat Leon 4 Door First Generation (1999-2006)

Cockpit 65
Safety First Handling instructions Tips and Maintenance Technical Data
Instrument panel menus
Main menu
The menu enables access to the different display functions.
Open main menu
– Switch on the ignition.
– Press and hold the button for 2 seconds. It may be necessary
to repeat this operation until the main menu is displayed.
Select a menu from the main menu
– To choose an option from the menu, press the upper or lower end
of the rocker switch. The selected option is displayed between
two horizontal lines.
– Press button to select the entry.
Example of use of menus: “Example of use of menus”
Fig. 42 Windscreen wiper
lever: button A to confirm
the menu point and rocker
switch B to change the
menu
Fig. 43 Digital display on
the instrument panel:
Main menu
A
B
A
A
s1cg.2.book Seite 65 Montag, 25. April 2005 3:54 15
Cockpit66
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.
Main menu Function
Multi-function display Change to multi-function display (MFD): “Multi-function display (MFD)”
Audio The current station will be shown when the radio is switched on
Navigation This menu is only available if the vehicle is fitted with a navigation system. The navigation system must be
switched on. When the destination guide is activated, the turning arrows and proximity bars are displayed. The
display is similar to that of the Navigation system.
If the destination guide is not activated, the direction of travel (compass) and the name of the street along which
you are driving are shown
Telephone This menu is only available if the vehicle is fitted with a telephone mounted by the manufacturer: “Fixed tele-
phone installation”
Vehicle condition This menu displays the actual warning or information texts: “Menu Vehicle condition”
This option flashes when any of these texts are displayed
Configuration This option allows the time, the speed warning when using winter tyres, units, language, independent heating,
the Light and visibility menu and the Convenience menu to be reset
Display off The display is switched off.
It comes on again on entering the main menu or when a warning, breakdown or service message appears. The
main menu will be shown in the display for approximately 5 seconds after the ignition is switched on. The display
will then switch off again
s1cg.2.book Seite 66 Montag, 25. April 2005 3:54 15
Cockpit 67
Safety First Handling instructions Tips and Maintenance Technical Data
Example of menu use
All the menus on the instrument panel may be used according to the following procedure.
The setting of a speed warning will be used as an example of how to
use the menus. This is a good idea if you are, for example, using
winter tyres which are not suited for the top speed of the vehicle.
1. To open the main menu
– Switch on the ignition.
– Hold down button for two seconds to return to main menu
from other menu. It may be necessary to repeat this operation
until the main menu is displayed.
2. To open the menu“Configuration”
– To choose an option from the menu, press the upper or lower end
of the rocker switch. The selected option is displayed between
two lines and there will also be a triangle on the right.
–Select menu Configuration.
– Press button on the windscreen wiper lever. The Configura-
tion menu is opened.
3. To open the menu“Configuration”
– Select option Winter tyres using the rocker switch.
– Press button . The menu Winter tyres is opened.
4. To program a speed warning
– Use the rocker switch to select the menu entry +10km/h or -10
km/h and press the button to either increase or decrease the set
speed.
Fig. 44 Windscreen wiper
lever: button to
confirm the menu point
and rocker switch to
change the menu
A
A
A
B
Fig. 45 Digital screen on
the instrument panel:
winter tyre display
A
B
A
A
A
A
s1cg.2.book Seite 67 Montag, 25. April 2005 3:54 15
Cockpit68
5. To activate and deactivate the speed warning
– Use the rocker switch to select the menu point On/ Off and press
the button to switch the speed warning either on or off. If the
speed warning is deactivated, three dashes will be displayed ---.
6. To leave the menu “Winter tyres”
– In the menu select Back.
The function “Winter tyres” sends an optical and an acoustic signal when the
vehicle reaches the set speed.
Example menu “Winter tyres”
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.
On the display
Winter tyres
Function
Name of menu displayed
X km/h The current set speed is displayed
or --- or dashes will be shown if the function is deactivated
On / Off If the function is activated or deactivated
+10 km/h The set value increases by 10 km/h
-10 km/h The set value decreases by 10 km/h
Back The menu “Winter tyres”is closed and the last displayed menu is shown
s1cg.2.book Seite 68 Montag, 25. April 2005 3:54 15
Cockpit 69
Safety First Handling instructions Tips and Maintenance Technical Data
Vehicle status menu
This menu shows warning or information texts.
Open Vehicle Condition menu
– Choose option Vehicle conditionfrom main menu: “Main menu”
and press the button on the windscreen wiper lever.
Priority 2 warning messages and information texts: “Warning and information
texts on the screen” automatically disappear after a certain time and are
saved in the menu “Vehicle condition”.
The warning and information texts may be viewed in this menu. If there are no
messages, ok appears on the display. If there are several messages, each one
is shown for four seconds.
Configuration menu
This menu is used to make the settings for the vehicle functions.
Open Configuration menu
– Choose the Configuration option from main menu “Main menu”
and press the button on the windscreen wiper lever.
Example of use of menus: “Example of use of menus”.
Configuration Function
Time The hours and minutes of the clock and the navigation system can be changed. Both 12- and 24-hour
formats are available and the time may be changed to summer time (an S appears in the upper part of
the screen)
Winter tyres The menu allows the setting of a speed at which an optical and acoustic warning will be given by the
system. You can use this function, for example, if you have fitted winter tyres which are not suited for the
top speed of your vehicle . See chapter “Wheels”in owner's manual
Settings: Language The display texts and the navigation system texts can be seen in seven different languages
Units This option allows you to select the units for displaying temperature, fuel consumption values and dis-
tances
Lights & visibil. From this menu it is it possible to alter the vehicle lighting settings: “Lights and visibility menu”
Display off Only emergency messages appear
Back This returns to the main menu
s1cg.2.book Seite 69 Montag, 25. April 2005 3:54 15
Cockpit70
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.
Lights and visibility menu
From this menu it is it possible to alter the vehicle lighting settings.
Open Lights and visibility Menu
– Choose the option Configuration from main menu: “Main menu”
and press the button on the windscreen wiper lever.
– Select the option Lights & visibility from the menu and press
button on the windscreen wiper lever.
Example of use of menus: “Example of use of menus”
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.
A
A
A
A
Lights & visibil. Function
Coming Home/
Leaving Home
The lights activation time may be modified by steps of 10 seconds with a minimum of 10 seconds and a
maximum of 90 seconds
The function may also be deactivated
Indicator conv. With the convenience mode activated, the indicator will blink at least three times when turned on
Manufacturer's settings The manufacturer's predefined values for the functions of this menu are restored
Back This returns to the Configuration menu
s1cg.2.book Seite 70 Montag, 25. April 2005 3:54 15

Related Topics

Popular Owner Manuals