Wheels › SEAL tyres 225
Raise vehicle
WARNING
Rim size
Tyre size
8Jx19 ET45
8Jx19 ET45
235/55 R19
255/50 R19
Always ensure the base plate of the lifting jack cannot slip!
Provide a wide and firm base under the jack on loose surfaces.
Create a non-slip base (e.g. a rubber floor mat) under the jack
on a smooth surface.
▶
Only fit snow chains with links and locks that are no larger than
9 mm.
▶
Always raise the vehicle with the doors closed.
Do not insert any body parts under the raised vehicle.
Do not turn on ignition of the lifted vehicle.
▶
▶
▶
SEAL tyres
Usage
NOTICE
Danger of damage to vehicle!
The SEAL tyres have increased resistance to air leakage when
punctured.
Make sure that the jack is attached correctly to the bridge of
the sill.
▶
When replacing SEAL tyres with standard tires, the vehicle must
have one of the following pieces of equipment.
After having been changed
Check the tyre pressure on the mounted wheel and adjust if
necessary.
In vehicles with a tyre indicator, save the tyre pressure values
in the system.
›
Spare or emergency spare wheel with corresponding tool for
replacing it.
Breakdown kit.
▶
›
▶
Have the tightening torque of the wheel bolts of the mounted
tyres checked with a torque wrench as soon as possible.
›
Changing the wheel and raising the vehicle
What you should be mindful of
Before changing
The specified tightening torque is 120 Nm.
Drive carefully until the tightening torque is checked.
Replace the damaged tyre. It is not recommended to repair the
tyre.
Park the vehicle securely and secure it from rolling away.
Switch off the ignition.
Let all of the occupants get out. During the wheel change they
›
›
›
should not stand on the road, e.g. behind the crash barriers.
Close all doors, the boot and front flap.
Uncouple any trailers.
›
›
English 
