2020-2024 Skoda Enyaq 4 Door Wheels -> Tyre pressure User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Wheels -> Tyre pressure for Your Skoda Enyaq 4 Door First Generation (2020-2024)

Wheels › Tyre pressure 229  
The outdoor temperature is below the minimum temperature  
indicated in the manual of the tyre filling bottle.  
Once a tyre pressure of 2.0-2.5 bar is reached, turn off the air  
compressor.  
▶
›
Tyre punctures are greater than 4 mm.  
There is damage to the tyre wall.  
The expiry date stated on the tyre inflation bottle has expired.  
▶
▶
▶
Observe the maximum running time of the air compressor ac-  
cording to the directions of the repair kit manufacturer.  
If an air pressure of 2.0 - 2.5 bar has not been reached, remove  
›
the tyre inflation hose from the valve.  
Drive approx. 10 metres forwards or backwards to allow the  
sealing agent to distribute in the tyre.  
›
Self-help  
Replace the tire inflation hose on the valve and repeat the infla-  
tion procedure.  
Seal the tyres  
›
Unscrew the valve cap from the damaged tyre.  
Unscrew the valve core with the valve insert and place it on a  
clean surface.  
›
›
Tyre pressure  
Shake the tyre inflation bottle back and forth with sealant.  
Screw the inflation hose onto the tyre inflater bottle. The film  
on the closure is pierced automatically.  
›
›
What you should be mindful of  
NOTICE  
Remove the plug from the inflation hose and push it fully onto  
the tyre valve.  
Hold the bottle with the bottom facing upwards and fill all of  
the sealing agent into the tyre.  
›
Always adjust the tyre pressure to the load.  
Check the pressure in all tyres at least once a month and be-  
fore each longer ride.  
▶
▶
›
Check the pressure when the tyres are cold. Do not reduce the  
higher pressure of warm tyres.  
After each change in tyre pressure, save the new values in the  
tyre control display.  
▶
▶
Remove the filler plug from the valve.  
Screw in the valve insert.  
›
›
Inflate tyres  
Fit the tyre inflation hose of the air compressor to the tyre  
valve.  
Secure the vehicle with the parking brake.  
Turn on the ignition.  
Plug the connector into the 12 volt socket .  
Turn on the air compressor.  
›
WARNING  
Risk of an accident!  
If tyre pressure loss is very quick, try to stop the vehicle care-  
fully without heavy steering or heavy braking.  
›
▶
›
›
›

Related Topics

Popular Owner Manuals