7-41
Starting and operating/Cruise control
& To turn off the cruise control
U.S.-spec. models
set is less than 4 mph (6.8 km/h), the
vehicle speed will be lowered by 1 mph
When the difference between the actual
There are two ways to turn off the cruise
(1.6 km/h). This occurs because the
vehicle speed and the set speed is less
control:
cruise control system regards this
than 4 mph (6.8 km/h), the set speed can
. Press the cruise control main button
operation as that intended to decrease
be increased 1 mph (1.6 km/h) each time
again.
the vehicle speed.
by pressing the “RES/SET” switch to the
. Turn the ignition switch to the “ACC” or
. Except U.S.-spec. models
“RES” side quickly.
“LOCK” (off) position (but only when the
If the difference between the actual
vehicle is completely stopped).
Except U.S.-spec. models
vehicle speed when the switch is
When the difference between the actual
pressed and the speed last time you
& To change the cruising speed
vehicle speed and the set speed is less
set is less than 4.4 km/h, the vehicle
than 4.4 km/h, the set speed can be
speed will be lowered by 1 km/h. This
! To increase the speed (by the “RES/
increased 1 km/h each time by pressing
occurs because the cruise control
SET” switch)
the “RES/SET” switch to the “RES” side
system regards this operation as that
quickly.
intended to decrease the vehicle
speed.
! To increase the speed (by accel-
erator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Press the “RES/SET” switch to the
“SET” side once. Now the desired speed
is set and the vehicle will keep running at
that speed without depressing the accel-
erator pedal.
Press the “RES/SET” switch to the “RES”
NOTE
side and hold it until the vehicle reaches
. U.S.-spec. models
the desired speed. Then, release the
If the difference between the actual
switch. The vehicle speed at that moment
vehicle speed when the switch is
will be memorized and treated as the new
pressed and the speed last time you
set speed.
– CONTINUED –
English 
