2017-2022 Subaru XV SUV Starting and operating -> Braking User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and operating -> Braking for Your Subaru XV SUV Second Generation (2017-2022)

7-31Starting and operating/Brakingwheel is not operated for a while andBrakinga loss of control of the vehicle. Keepthe power steering control system hasdriving straight ahead while graduallyS07AKan opportunity to cool down. However,& Braking tipsreducing speed. Then slowly pull off theif the power steering is operated in aroad to a safe location.S07AK01non-standard way which causes powerWARNING& Brake systemassist limitation to occur too frequently,this may result in a malfunction of theNever rest your foot on the brakeS07AK02! Two separate circuitspower steering control while driving. This can causeS07AK0201Your vehicle has two separate circuit brakedangerous overheating of thesystems. Each circuit works diagonallybrakes and needless wear on theacross the vehicle. If one circuit of thebrake pads and system should fail, the other half ofthe system still works. If one circuit fails,! When the brakes get wetthe brake pedal will go down much closerS07AK0101When driving in rain or after washing theto the floor than usual and you will need tovehicle, the brakes may get wet. As apress it down much harder. And a muchresult, brake stopping distance will belonger distance will be needed to stop thelonger. To dry the brakes, drive the a safe speed while lightly depressing the! Brake boosterbrake pedal to heat up the brakes.S07AK0202The brake booster uses engine manifold! Use of engine brakingvacuum to assist braking force. Do not turnS07AK0102Remember to make use of engine brakingoff the engine while driving because thatin addition to foot braking. When descend-will turn off the brake booster, resulting ining a grade, if only the foot brake is used,poor braking brakes may start working improperlyThe brakes will continue to work evenbecause of brake fluid overheating,when the brake booster completely stopscaused by overheated brake pads. To helpfunctioning. If this happens, you will haveprevent this, shift into a lower ge
7-31
Starting and operating/Braking
wheel is not operated for a while and
Braking
a loss of control of the vehicle. Keep
the power steering control system has
driving straight ahead while gradually
S07AK
an opportunity to cool down. However,
& Braking tips
reducing speed. Then slowly pull off the
if the power steering is operated in a
road to a safe location.
S07AK01
non-standard way which causes power
WARNING
& Brake system
assist limitation to occur too frequently,
this may result in a malfunction of the
Never rest your foot on the brake
S07AK02
! Two separate circuits
power steering control system.
pedal while driving. This can cause
S07AK0201
Your vehicle has two separate circuit brake
dangerous overheating of the
systems. Each circuit works diagonally
brakes and needless wear on the
across the vehicle. If one circuit of the
brake pads and linings.
brake system should fail, the other half of
the system still works. If one circuit fails,
! When the brakes get wet
the brake pedal will go down much closer
S07AK0101
When driving in rain or after washing the
to the floor than usual and you will need to
vehicle, the brakes may get wet. As a
press it down much harder. And a much
result, brake stopping distance will be
longer distance will be needed to stop the
longer. To dry the brakes, drive the vehicle
vehicle.
at a safe speed while lightly depressing the
! Brake booster
brake pedal to heat up the brakes.
S07AK0202
The brake booster uses engine manifold
! Use of engine braking
vacuum to assist braking force. Do not turn
S07AK0102
Remember to make use of engine braking
off the engine while driving because that
in addition to foot braking. When descend-
will turn off the brake booster, resulting in
ing a grade, if only the foot brake is used,
poor braking power.
the brakes may start working improperly
The brakes will continue to work even
because of brake fluid overheating,
when the brake booster completely stops
caused by overheated brake pads. To help
functioning. If this happens, you will have
prevent this, shift into a lower gear to get
to depress the pedal much harder than
stronger engine braking.
during normal braking, and the braking
! Braking when a tire is punctured
distance will increase.
S07AK0103
Do not depress the brake pedal suddenly
when a tire is punctured. This could cause
3 CONTINUED 3
7-32Starting and operating/Braking& Disc brake pad wear warningBrake assist is a driver assistance system.! Supplemental booster functionIt assists the brake power when the driverindicatorswhen vacuum pressure failscannot depress the brake pedal stronglyS07AK0205S07AK03While the ignition switch is turned <ON=and the brake power is the engine is running, the supple-Brake assist generates the brake powermental booster function operates when theaccording to the speed at which the driverbrake booster performance is decreaseddepresses the brake to insufficient vacuum the brake pedal is depressed whileNOTEthe supplemental booster function is oper-When you depress the brake pedalating, an operation sound and brake pedalstrongly or suddenly, the followingvibration may be generated. This is not aphenomena occur. However, these occur, they do not indi-! Brake assist systemcate any malfunctions, and the brakeS07AK0203assist system is operating . You might feel that the brake pedal isThe disc brake pad wear warning indica-applied by lighter force and generates ators on the disc brakes give a warningDo not be overconfident about thegreater braking when the brake pads are assist. It is not a system that. You might hear an ABS operatingbrings more braking ability to theIf a squeaking or scraping noise is heardnoise from the engine beyond its braking capabil-from the disc brakes while braking, im-ity. Always use the utmost caremediately have your vehicle checked bywhen driving regarding vehicleyour SUBARU and safe you need to brake suddenly,continue depressing the brake pedalstrongly to bring the effect of thebrake assist.
7-32
Starting and operating/Braking
& Disc brake pad wear warning
Brake assist is a driver assistance system.
! Supplemental booster function
It assists the brake power when the driver
indicators
when vacuum pressure fails
cannot depress the brake pedal strongly
S07AK0205
S07AK03
While the ignition switch is turned <ON=
and the brake power is insufficient.
and the engine is running, the supple-
Brake assist generates the brake power
mental booster function operates when the
according to the speed at which the driver
brake booster performance is decreased
depresses the brake pedal.
due to insufficient vacuum boost.
When the brake pedal is depressed while
NOTE
the supplemental booster function is oper-
When you depress the brake pedal
ating, an operation sound and brake pedal
strongly or suddenly, the following
vibration may be generated. This is not a
phenomena occur. However, even
malfunction.
though these occur, they do not indi-
! Brake assist system
cate any malfunctions, and the brake
S07AK0203
assist system is operating properly.
WARNING
. You might feel that the brake pedal is
The disc brake pad wear warning indica-
applied by lighter force and generates a
tors on the disc brakes give a warning
Do not be overconfident about the
greater braking force.
noise when the brake pads are worn.
brake assist. It is not a system that
. You might hear an ABS operating
brings more braking ability to the
If a squeaking or scraping noise is heard
noise from the engine compartment.
vehicle beyond its braking capabil-
from the disc brakes while braking, im-
ity. Always use the utmost care
mediately have your vehicle checked by
when driving regarding vehicle
your SUBARU dealer.
speed and safe distance.
CAUTION
When you need to brake suddenly,
continue depressing the brake pedal
strongly to bring the effect of the
brake assist.

Related Topics

Popular Owner Manuals