2017-2022 Subaru XV SUV Starting and operating -> Vehicle Dynamics Control system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and operating -> Vehicle Dynamics Control system for Your Subaru XV SUV Second Generation (2017-2022)

7-35Starting and operating/Vehicle Dynamics Control systemVehicle Dynamics Controlhave the vehicle towed to the nearestnamics Control is no guaranteeSUBARU dealer for full vehicle control will besystemmaintained at all times and underWARNINGS07ANall conditions, its activation& Safety precautionsshould be seen as a sign thatS07AN05. Driving with the brake systemthe speed of the vehicle shouldWARNINGwarning light illuminated is dan-be reduced . This indicates your brakeAlways use the utmost care in driv-. Whenever suspension compo-system may not be working prop-ing 3 overconfidence because younents, steering components, orerly. If the light remains illumi-are driving a vehicle with the Vehiclean axle are removed from anated, have the brakes inspectedDynamics Control system could ea-vehicle, have an inspection ofby a SUBARU dealer immedi-sily lead to a serious system performed by SUBARU dealer.. If at all in doubt about whether the. The following precautions shouldbrakes are operating properly, doCAUTIONbe observed in order to ensurenot drive the vehicle. Have yourthat the Vehicle Dynamics Con-vehicle towed to the nearest. Even if your vehicle is equippedtrol system is operating properly:SUBARU dealer for Vehicle Dynamics Control3 All four wheels should besystem, winter tires should befitted with tires of the sameused when driving on snow-cov-size, type, and brand. Further-ered or icy roads; in addition,more, the amount of wearvehicle speed should be reducedshould be the same for all fourconsiderably. Simply having Dynamics Control sys-tem does not guarantee that the3 Keep the tire pressure at thevehicle will be able to avoidproper level as shown on theaccidents in any placard attached tothe driver9s side door pillar.. Activation of the Vehicle Dy-namics Control system is an3 Use only the specified tempor-indication that the road beingary spare tire to replace a
7-35
Starting and operating/Vehicle Dynamics Control system
Vehicle Dynamics Control
have the vehicle towed to the nearest
namics Control is no guarantee
SUBARU dealer for repair.
that full vehicle control will be
system
maintained at all times and under
WARNING
S07AN
all conditions, its activation
& Safety precautions
should be seen as a sign that
S07AN05
. Driving with the brake system
the speed of the vehicle should
WARNING
warning light illuminated is dan-
be reduced considerably.
gerous. This indicates your brake
Always use the utmost care in driv-
. Whenever suspension compo-
system may not be working prop-
ing 3 overconfidence because you
nents, steering components, or
erly. If the light remains illumi-
are driving a vehicle with the Vehicle
an axle are removed from a
nated, have the brakes inspected
Dynamics Control system could ea-
vehicle, have an inspection of
by a SUBARU dealer immedi-
sily lead to a serious accident.
that system performed by an
ately.
authorized SUBARU dealer.
. If at all in doubt about whether the
. The following precautions should
brakes are operating properly, do
CAUTION
be observed in order to ensure
not drive the vehicle. Have your
that the Vehicle Dynamics Con-
vehicle towed to the nearest
. Even if your vehicle is equipped
trol system is operating properly:
SUBARU dealer for repair.
with Vehicle Dynamics Control
3 All four wheels should be
system, winter tires should be
fitted with tires of the same
used when driving on snow-cov-
size, type, and brand. Further-
ered or icy roads; in addition,
more, the amount of wear
vehicle speed should be reduced
should be the same for all four
considerably. Simply having a
tires.
Vehicle Dynamics Control sys-
tem does not guarantee that the
3 Keep the tire pressure at the
vehicle will be able to avoid
proper level as shown on the
accidents in any situation.
vehicle placard attached to
the driver9s side door pillar.
. Activation of the Vehicle Dy-
namics Control system is an
3 Use only the specified tempor-
indication that the road being
ary spare tire to replace a flat
travelled on has a slippery sur-
tire. With a temporary spare
face; since having Vehicle Dy-
tire, the effectiveness of the
3 CONTINUED 3
7-36Starting and operating/Vehicle Dynamics Control system. Traction Control Dynamics Controlsystem is reduced and this. In the circumstances shown in theThe traction control function is designed toshould be taken into accountfollowing list, the vehicle may be lessprevent spinning of the driving wheels onwhen driving the vehicle instable than it feels to the driver. Theslippery road surfaces, thereby helping tosuch a Dynamics Control System maymaintain traction and directional operate. Such operation doesActivation of this function is shown by. If non-matching tires are used,not indicate a system the Vehicle Dynamics Controlthe Vehicle Dynamics Controloperation indicator light.3 on gravel-covered or rutted roadssystem may not operate cor-3 on unfinished roadsrectly.. Skid Suppression Function3 when the vehicle is towing a. The Vehicle Dynamics ControlThe skid suppression function is designedtrailersystem helps prevent unstableto help maintain directional stability by3 when the vehicle is fitted withvehicle motion such as skiddingsuppressing the wheels9 tendency to slidesnow tires or winter tiresusing control of the brakes andsideways during steering operations. Acti-. Activation of the Vehicle Dynamicsengine power. Do not turn off thevation of this function is shown by flashingControl system will cause operation ofVehicle Dynamics Control sys-the Vehicle Dynamics Control operationthe steering wheel to feel slightlytem unless it is absolutely neces-indicator compared to that for normalsary. If you must turn off Dynamics Control sys-. It is always important to reducetem, drive very carefully accord-. The Vehicle Dynamics Control sys-speed when approaching a corner,ing to the road surface condi-tem may be considered normal wheneven if your vehicle is equipped following conditions Vehicle Dynamics Control system.3 Slight twitc
7-36
Starting and operating/Vehicle Dynamics Control system
. Traction Control Function
engine.
Vehicle Dynamics Control
system is reduced and this
. In the circumstances shown in the
The traction control function is designed to
should be taken into account
following list, the vehicle may be less
prevent spinning of the driving wheels on
when driving the vehicle in
stable than it feels to the driver. The
slippery road surfaces, thereby helping to
such a condition.
Vehicle Dynamics Control System may
maintain traction and directional control.
therefore operate. Such operation does
Activation of this function is shown by
. If non-matching tires are used,
not indicate a system malfunction.
flashing the Vehicle Dynamics Control
the Vehicle Dynamics Control
operation indicator light.
3 on gravel-covered or rutted roads
system may not operate cor-
3 on unfinished roads
rectly.
. Skid Suppression Function
3 when the vehicle is towing a
. The Vehicle Dynamics Control
The skid suppression function is designed
trailer
system helps prevent unstable
to help maintain directional stability by
3 when the vehicle is fitted with
vehicle motion such as skidding
suppressing the wheels9 tendency to slide
snow tires or winter tires
using control of the brakes and
sideways during steering operations. Acti-
. Activation of the Vehicle Dynamics
engine power. Do not turn off the
vation of this function is shown by flashing
Control system will cause operation of
Vehicle Dynamics Control sys-
the Vehicle Dynamics Control operation
the steering wheel to feel slightly
tem unless it is absolutely neces-
indicator light.
different compared to that for normal
sary. If you must turn off the
conditions.
NOTE
Vehicle Dynamics Control sys-
. It is always important to reduce
tem, drive very carefully accord-
. The Vehicle Dynamics Control sys-
speed when approaching a corner,
ing to the road surface condi-
tem may be considered normal when
even if your vehicle is equipped with
tions.
the following conditions occur.
the Vehicle Dynamics Control system.
3 Slight twitching of the brake
. Always turn off the engine before
pedal is felt.
replacing a tire. Failure to do so may
& System features
3 The vehicle or steering wheel
render the Vehicle Dynamics Control
S07AN06
In the event of wheelspin and/or skidding
shakes to a small degree.
system unable to operate correctly.
on a slippery road surface and/or during
3 An operating sound from the
cornering and/or an evasive maneuver,
engine compartment is heard briefly
the Vehicle Dynamics Control system
when starting the engine and when
adjusts the engine9s output and the
driving off after starting the engine.
wheels9 respective braking forces to help
3 The brake pedal seems to jolt
maintain traction and directional control.
when driving off after starting the
7-37Starting and operating/Vehicle Dynamics Control system& Vehicle Dynamics Control. a standing start on a steeply slopinghancement offered by Vehicle Dynamicssystem monitorroad with a snowy, gravel-covered, orControl system is unavailable. Thereforeotherwise slippery surfaceyou should not deactivate the VehicleS07AN01Refer to <Vehicle Dynamics Control warn-Dynamics Control system except under. extrication of the vehicle when itsing light/Vehicle Dynamics Control opera-above-mentioned are stuck in mud or deep snowtion indicator light= F3-23 and <VehicleDynamics Control OFF indicator light= F3-NOTE24.. When the switch has been pressedto deactivate the Vehicle Dynamics& Vehicle Dynamics ControlControl system, the Vehicle DynamicsOFF switchControl system automatically reacti-S07AN02vates itself the next time the ignitionswitch is turned to the <LOCK=/<OFF=position and the engine is restarted.. If the switch is held down for 30seconds or longer, the indicator lightturns off, the Vehicle Dynamics Controlsystem is activated, and the systemignores any further pressing of theWhen the switch is pressed during engineswitch. To make the switch usableoperation, the Vehicle Dynamics Controlagain, turn the ignition switch to theOFF indicator light < = on the combination<LOCK=/<OFF= position and restart themeter illuminates. The Vehicle system will be deactivated and the. When the switch is pressed tovehicle will behave like a model notdeactivate the Vehicle Dynamics Con-Press the Vehicle Dynamics Control OFFequipped with the Vehicle Dynamics Con-trol system, the vehicle9s running per-switch to deactivate the Vehicle Dynamicstrol system. When the switch is pressedformance is comparable with that of aControl system. Creating adequate drivingagain to reactivate the Vehicle Dynamicsvehicle that does not have a Vehiclewheel slip by deactivating the VehicleControl system, the Vehicle DynamicsDynamics Control system. Do not de-Dynamics Control s
7-37
Starting and operating/Vehicle Dynamics Control system
& Vehicle Dynamics Control
. a standing start on a steeply sloping
hancement offered by Vehicle Dynamics
system monitor
road with a snowy, gravel-covered, or
Control system is unavailable. Therefore
otherwise slippery surface
you should not deactivate the Vehicle
S07AN01
Refer to <Vehicle Dynamics Control warn-
Dynamics Control system except under
. extrication of the vehicle when its
ing light/Vehicle Dynamics Control opera-
above-mentioned situations.
wheels are stuck in mud or deep snow
tion indicator light= F3-23 and <Vehicle
Dynamics Control OFF indicator light= F3-
NOTE
24.
. When the switch has been pressed
to deactivate the Vehicle Dynamics
& Vehicle Dynamics Control
Control system, the Vehicle Dynamics
OFF switch
Control system automatically reacti-
S07AN02
vates itself the next time the ignition
switch is turned to the <LOCK=/<OFF=
position and the engine is restarted.
. If the switch is held down for 30
seconds or longer, the indicator light
turns off, the Vehicle Dynamics Control
system is activated, and the system
ignores any further pressing of the
When the switch is pressed during engine
switch. To make the switch usable
operation, the Vehicle Dynamics Control
again, turn the ignition switch to the
OFF indicator light < = on the combination
<LOCK=/<OFF= position and restart the
meter illuminates. The Vehicle Dynamics
engine.
Control system will be deactivated and the
. When the switch is pressed to
vehicle will behave like a model not
deactivate the Vehicle Dynamics Con-
Press the Vehicle Dynamics Control OFF
equipped with the Vehicle Dynamics Con-
trol system, the vehicle9s running per-
switch to deactivate the Vehicle Dynamics
trol system. When the switch is pressed
formance is comparable with that of a
Control system. Creating adequate driving
again to reactivate the Vehicle Dynamics
vehicle that does not have a Vehicle
wheel slip by deactivating the Vehicle
Control system, the Vehicle Dynamics
Dynamics Control system. Do not de-
Dynamics Control system may help to
Control OFF indicator light turns off.
activate the Vehicle Dynamics Control
recover from the loss of traction. Use the
system except when absolutely neces-
With the Vehicle Dynamics Control system
Vehicle Dynamics Control OFF switch as
sary.
deactivated, traction and stability en-
necessary.
. Even when the Vehicle Dynamics
3 CONTINUED 3
7-38Starting and operating/X-modeControl system is deactivated, compo-X-mode (if equipped)mode does not guarantee that thenents of the brake control system mayvehicle will be able to avoidS07BIstill activate. When the brake controlaccidents in any is activated, the Vehicle Dy-. Activate the X-mode when younamics Control operation indicatorencounter a very slippery surface. Always use the utmost care inlight low speed. However, having X-driving 3 overconfidence be-mode is no guarantee that fullcause you are driving a vehiclevehicle control will be maintainedwith X-mode could easily lead toat all times and under all condi-a serious . When activating X-mode,. Always use the utmost care inthe speed of the vehicle shoulddriving 3 overconfidence be-be reduced you are driving a vehicle. Whenever suspension compo-with hill descent control functionnents, steering components, orcould easily lead to a seriousan axle are removed from aaccident. Be especially careful,vehicle, have the system in-and depress the brake pedal ifspected by an authorizednecessary when driving on ex-SUBARU steep downhill, frozen,. Observe the following precau-muddy or sandy roads. Failuretions in order to ensure that theto control the vehicle9s speedX-mode is operating properly:may cause a loss of control andresult in a serious accident.3 All four wheels should befitted with tires of the samesize, type, and brand. Further-CAUTIONmore, the amount of wearshould be the same for all four. Even if your vehicle is X-mode, winter tires should3 Keep the tire pressure at thebe used when driving on snow-proper level as shown on thecovered or icy roads; in addition,label attached to the vehicle9svehicle speed should be reduceddoor . Simply having X-
7-38
Starting and operating/X-mode
Control system is deactivated, compo-
X-mode (if equipped)
mode does not guarantee that the
nents of the brake control system may
vehicle will be able to avoid
S07BI
still activate. When the brake control
accidents in any situation.
WARNING
system is activated, the Vehicle Dy-
. Activate the X-mode when you
namics Control operation indicator
encounter a very slippery surface
. Always use the utmost care in
light flashes.
at low speed. However, having X-
driving 3 overconfidence be-
mode is no guarantee that full
cause you are driving a vehicle
vehicle control will be maintained
with X-mode could easily lead to
at all times and under all condi-
a serious accident.
tions. When activating X-mode,
. Always use the utmost care in
the speed of the vehicle should
driving 3 overconfidence be-
be reduced considerably.
cause you are driving a vehicle
. Whenever suspension compo-
with hill descent control function
nents, steering components, or
could easily lead to a serious
an axle are removed from a
accident. Be especially careful,
vehicle, have the system in-
and depress the brake pedal if
spected by an authorized
necessary when driving on ex-
SUBARU dealer.
tremely steep downhill, frozen,
. Observe the following precau-
muddy or sandy roads. Failure
tions in order to ensure that the
to control the vehicle9s speed
X-mode is operating properly:
may cause a loss of control and
result in a serious accident.
3 All four wheels should be
fitted with tires of the same
size, type, and brand. Further-
CAUTION
more, the amount of wear
should be the same for all four
. Even if your vehicle is equipped
tires.
with X-mode, winter tires should
3 Keep the tire pressure at the
be used when driving on snow-
proper level as shown on the
covered or icy roads; in addition,
label attached to the vehicle9s
vehicle speed should be reduced
door pillar.
considerably. Simply having X-

Related Topics

Popular Owner Manuals