2017-2022 Subaru XV SUV Starting and operating -> X-mode (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and operating -> X-mode (if equipped) for Your Subaru XV SUV Second Generation (2017-2022)

7-38Starting and operating/X-modeControl system is deactivated, compo-X-mode (if equipped)mode does not guarantee that thenents of the brake control system mayvehicle will be able to avoidS07BIstill activate. When the brake controlaccidents in any is activated, the Vehicle Dy-. Activate the X-mode when younamics Control operation indicatorencounter a very slippery surface. Always use the utmost care inlight low speed. However, having X-driving 3 overconfidence be-mode is no guarantee that fullcause you are driving a vehiclevehicle control will be maintainedwith X-mode could easily lead toat all times and under all condi-a serious . When activating X-mode,. Always use the utmost care inthe speed of the vehicle shoulddriving 3 overconfidence be-be reduced you are driving a vehicle. Whenever suspension compo-with hill descent control functionnents, steering components, orcould easily lead to a seriousan axle are removed from aaccident. Be especially careful,vehicle, have the system in-and depress the brake pedal ifspected by an authorizednecessary when driving on ex-SUBARU steep downhill, frozen,. Observe the following precau-muddy or sandy roads. Failuretions in order to ensure that theto control the vehicle9s speedX-mode is operating properly:may cause a loss of control andresult in a serious accident.3 All four wheels should befitted with tires of the samesize, type, and brand. Further-CAUTIONmore, the amount of wearshould be the same for all four. Even if your vehicle is X-mode, winter tires should3 Keep the tire pressure at thebe used when driving on snow-proper level as shown on thecovered or icy roads; in addition,label attached to the vehicle9svehicle speed should be reduceddoor . Simply having X-
7-38
Starting and operating/X-mode
Control system is deactivated, compo-
X-mode (if equipped)
mode does not guarantee that the
nents of the brake control system may
vehicle will be able to avoid
S07BI
still activate. When the brake control
accidents in any situation.
WARNING
system is activated, the Vehicle Dy-
. Activate the X-mode when you
namics Control operation indicator
encounter a very slippery surface
. Always use the utmost care in
light flashes.
at low speed. However, having X-
driving 3 overconfidence be-
mode is no guarantee that full
cause you are driving a vehicle
vehicle control will be maintained
with X-mode could easily lead to
at all times and under all condi-
a serious accident.
tions. When activating X-mode,
. Always use the utmost care in
the speed of the vehicle should
driving 3 overconfidence be-
be reduced considerably.
cause you are driving a vehicle
. Whenever suspension compo-
with hill descent control function
nents, steering components, or
could easily lead to a serious
an axle are removed from a
accident. Be especially careful,
vehicle, have the system in-
and depress the brake pedal if
spected by an authorized
necessary when driving on ex-
SUBARU dealer.
tremely steep downhill, frozen,
. Observe the following precau-
muddy or sandy roads. Failure
tions in order to ensure that the
to control the vehicle9s speed
X-mode is operating properly:
may cause a loss of control and
result in a serious accident.
3 All four wheels should be
fitted with tires of the same
size, type, and brand. Further-
CAUTION
more, the amount of wear
should be the same for all four
. Even if your vehicle is equipped
tires.
with X-mode, winter tires should
3 Keep the tire pressure at the
be used when driving on snow-
proper level as shown on the
covered or icy roads; in addition,
label attached to the vehicle9s
vehicle speed should be reduced
door pillar.
considerably. Simply having X-
7-39Starting and operating/X-modeX-mode has the following functions.3 Use only the special tempor-ary spare tire to replace a flat. Hill descent control function:tire. With a normal temporaryUsing the hill descent control function, youspare tire, the effectiveness ofcan keep the vehicle at a consistent speedthe X-mode is reduced anddriving downhill. If the vehicle speed isthis should be taken into ac-likely to increase, the brake control systemcount when driving the vehi-will be activated to adjust the vehiclecle in such a .. If the hill descent control function. Driving ability control:has operated continuously for aThis mode increases the hill-climbinglong time, the temperature of theability and driving ability as well asbrake disc may increase and theenabling smooth application of torque forhill descent control function mayeasier control of the steering wheel.X-mode indicator (type A)be temporarily disabled. In thiscase, the hill descent control& To activate/deactivate the X-indicator will disappear. Whenmodethe hill descent control indicatordisappears, the hill descent con-S07BI01trol function is disabled.X-mode is the integrated control system ofthe engine, AWD and Vehicle DynamicsControl system, etc. for driving with badroad conditions. Using X-mode, you candrive more comfortably even in slipperyroad conditions including uphill and down-hill.X-mode indicator (type B)To activate:Press the X-mode switch. While the X-X-mode switchmode is activated, the X-mode indicator3 CONTINUED 3
7-39
Starting and operating/X-mode
X-mode has the following functions.
3 Use only the special tempor-
ary spare tire to replace a flat
. Hill descent control function:
tire. With a normal temporary
Using the hill descent control function, you
spare tire, the effectiveness of
can keep the vehicle at a consistent speed
the X-mode is reduced and
driving downhill. If the vehicle speed is
this should be taken into ac-
likely to increase, the brake control system
count when driving the vehi-
will be activated to adjust the vehicle
cle in such a condition.
speed.
. If the hill descent control function
. Driving ability control:
has operated continuously for a
This mode increases the hill-climbing
long time, the temperature of the
ability and driving ability as well as
brake disc may increase and the
enabling smooth application of torque for
hill descent control function may
easier control of the steering wheel.
X-mode indicator (type A)
be temporarily disabled. In this
case, the hill descent control
& To activate/deactivate the X-
indicator will disappear. When
mode
the hill descent control indicator
disappears, the hill descent con-
S07BI01
trol function is disabled.
X-mode is the integrated control system of
the engine, AWD and Vehicle Dynamics
Control system, etc. for driving with bad
road conditions. Using X-mode, you can
drive more comfortably even in slippery
road conditions including uphill and down-
hill.
X-mode indicator (type B)
To activate:
Press the X-mode switch. While the X-
X-mode switch
mode is activated, the X-mode indicator
3 CONTINUED 3
7-40Starting and operating/X-modeNOTEappears.. If the engine could overheat becauseof a temperature increase of the engine. Even while the hill descent controlTo deactivate:coolant, it may not be possible tofunction is operating, you can vary thePress the X-mode switch again. The X-activate the X-mode. Even while the X-vehicle speed by using the brake pedalmode indicator will disappear when the X-mode is activated, the X-mode will beor accelerator is when the engine coolant. During braking by the hill descenttemperature function, the hill descent con-NOTEtrol indicator will flash.. Even if you try to activate the X-. The hill descent control function is& Hill descent control functionmode by pressing the X-mode switchoperable regardless of the gradient ofS07BI03when the vehicle speed is 12 mph (20The hill descent control function will be inthe or more, the X-mode will not bestandby mode when the X-mode is acti-. The hill descent control functionactivated. At this time, a buzzer willvated and the vehicle speed is less thanmay be considered normal when thesound 12 mph (20 km/h).following conditions occur.. If the vehicle speed reaches 25 mphThe function will operate when the vehicle3 An operating sound is heard(40 km/h) or more while the X-mode isspeed is less than approximately 12 mphbriefly from the engine compart-activated, a buzzer will sound once and(20 km/h) and the accelerator ratio is lessment while the hill descent controlthe X-mode will be approximately 10%.function is operating.. While the engine is running, if any ofThe function will turn off when the vehicle3 The sensation of depressing thethe following conditions is met, the X-speed is more than approximately 12 mphbrake pedal is different, (harder thanmode will be deactivated. In this case, it(20 km/h) and the accelerator pedal isusual etc.) when the brake pedal isis not possible to activate the
7-40
Starting and operating/X-mode
NOTE
appears.
. If the engine could overheat because
of a temperature increase of the engine
. Even while the hill descent control
To deactivate:
coolant, it may not be possible to
function is operating, you can vary the
Press the X-mode switch again. The X-
activate the X-mode. Even while the X-
vehicle speed by using the brake pedal
mode indicator will disappear when the X-
mode is activated, the X-mode will be
or accelerator pedal.
mode is deactivated.
deactivated when the engine coolant
. During braking by the hill descent
temperature increases.
control function, the hill descent con-
NOTE
trol indicator will flash.
. Even if you try to activate the X-
. The hill descent control function is
& Hill descent control function
mode by pressing the X-mode switch
operable regardless of the gradient of
S07BI03
when the vehicle speed is 12 mph (20
The hill descent control function will be in
the road.
km/h) or more, the X-mode will not be
standby mode when the X-mode is acti-
. The hill descent control function
activated. At this time, a buzzer will
vated and the vehicle speed is less than
may be considered normal when the
sound twice.
approximately 12 mph (20 km/h).
following conditions occur.
. If the vehicle speed reaches 25 mph
The function will operate when the vehicle
3 An operating sound is heard
(40 km/h) or more while the X-mode is
speed is less than approximately 12 mph
briefly from the engine compart-
activated, a buzzer will sound once and
(20 km/h) and the accelerator ratio is less
ment while the hill descent control
the X-mode will be deactivated.
than approximately 10%.
function is operating.
. While the engine is running, if any of
The function will turn off when the vehicle
3 The sensation of depressing the
the following conditions is met, the X-
speed is more than approximately 12 mph
brake pedal is different, (harder than
mode will be deactivated. In this case, it
(20 km/h) and the accelerator pedal is
usual etc.) when the brake pedal is
is not possible to activate the X-mode.
depressed.
depressed during hill descent con-
3 The CHECK ENGINE warning
trol function operation.
light/malfunction indicator light illu-
CAUTION
minates.
The braking power of the hill des-
3 The AT OIL TEMP warning light
cent control function may not be
flashes.
sufficient when strong braking
3 The ABS warning light illumi-
power is needed (e.g., when towing
nates.
a trailer).
3 The Vehicle Dynamics Control
warning light illuminates.
7-41Starting and operating/Tire pressure monitoring system (TPMS) (U.S.-spec. models)Tire pressure monitoringoperating. It will disappear when the! Hill descent control indicatorfunction is in the disabled mode. WhenS07BI0301system (TPMS) (U.S.- function is changed from operationalmodels)to non-operational, it will disappear whenthe vehicle speed reaches more thanS07AOapproximately 18 mph (30 km/h).Hill descent control indicator (type A)The tire pressure monitoring system pro-vides the driver with a warning messagewhen tire pressure is severely tire pressure monitoring system willactivate only when the vehicle is driven atspeeds above 20 mph (32 km/h). Also, thissystem may not react immediately to asudden drop in tire pressure (for example,a blow-out caused by running over a sharpobject).Hill descent control indicator (type B)WARNINGThis indicator appears while the hill des-. If the low tire pressure warningcent control function is in the standbylight illuminates while driving,mode. It flashes while the function is3 CONTINUED 3
7-41
Starting and operating/Tire pressure monitoring system (TPMS) (U.S.-spec. models)
Tire pressure monitoring
operating. It will disappear when the
! Hill descent control indicator
function is in the disabled mode. When
S07BI0301
system (TPMS) (U.S.-spec.
this function is changed from operational
models)
to non-operational, it will disappear when
the vehicle speed reaches more than
S07AO
approximately 18 mph (30 km/h).
Hill descent control indicator (type A)
The tire pressure monitoring system pro-
vides the driver with a warning message
when tire pressure is severely low.
The tire pressure monitoring system will
activate only when the vehicle is driven at
speeds above 20 mph (32 km/h). Also, this
system may not react immediately to a
sudden drop in tire pressure (for example,
a blow-out caused by running over a sharp
object).
Hill descent control indicator (type B)
WARNING
This indicator appears while the hill des-
. If the low tire pressure warning
cent control function is in the standby
light illuminates while driving,
mode. It flashes while the function is
3 CONTINUED 3

Related Topics

Popular Owner Manuals