2015-2021 Suzuki Baleno 4 Door Before Driving -> Windows User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Before Driving -> Windows for Your Suzuki Baleno 4 Door Second Generation (2015-2021)

2-19
BEFORE DRIVING
Theft Deterrent Light
(if equipped)
68PH00223
This light will blink with the ignition switch
in the “LOCK” or “ACC” position. The blink-
ing light is intended to deter theft by lead-
ing others to believe that the vehicle is
equipped with a security system.
Windows
Manual Window Control
(if equipped)
60G010
Raise or lower the door windows by turning
the handle located on the door panel.
Electric Window Controls
The electric windows can only be operated
when the ignition switch is in the “ON”
position or the ignition mode is “ON”.
Driver’s side (Type A)
68PH00224
EXAMPLE
EXAMPLE
(1)
(2)
EXAMPLE
2-20
BEFORE DRIVING
Driver’s side (Type B)
68PH00225
The driver’s door has a switch (1) to oper-
ate the driver’s window, and a switch (2) to
operate the front passenger’s window or
there are switches (3), (4), to operate the
rear left and right passenger windows,
respectively.
Passenger’s door
68PH00226
The passenger’s door has a switch (5) to
operate the passenger’s window.
81A009
To open a window, push the top part of the
switch and to close the window lift up the
top part of the switch.
The driver’s window has “auto-down” and
“auto-up” (if equipped) features for added
convenience (at toll booths or drive-
through restaurants, for example). This
means the driver can open or close the
window without holding the window switch
in the “Down” or “Up” position. Press down
or lift up the driver’s window switch com-
pletely and release it. To stop the window
before it reaches the full-down or full-up
position, pull up or push down the switch
briefly.
(1)
(2)
(3)
(4)
EXAMPLE
(5)
EXAMPLE
CLOSE
OPEN
2-21
BEFORE DRIVING
Lock switch
68PH00227
The driver’s door also has a lock switch for
the passenger’s window(s). When you
push in the lock switch, the passenger’s
window(s) cannot be raised or lowered by
operating any of the switches (2), (3), (4)
or (5). To restore normal operation, release
the lock switch by pushing again.
NOTE:
If you drive with one of the rear windows
open, you may hear a loud sound caused
by air vibration. To reduce the sound, open
the driver’s or front passenger’s window, or
narrow the rear window opening.
Pinching Prevention Function
(if equipped)
The driver’s window is equipped with the
pinching prevention function. The function
detects a foreign object caught in the win-
dow while being closed by the “auto-up”
feature, by which you can close the win-
dow without holding the window switch in
the “Up” position, and stops the window
closing to prevent damage.
EXAMPLE
WARNING
• You should always lock the pas-
senger’s window operation when
there are children in the vehicle.
Children can be seriously injured if
they get part of their body caught
by the window during operation.
• To avoid injuring an occupant by
window entrapment, be sure no
part of the occupant’s body such as
hands or head is in the path of the
electric windows when closing
them.
• Always remove the ignition key or
take the keyless push start system
remote controller with you when
leaving the vehicle even if only for
a short time. Also do not leave chil-
dren alone in a parked vehicle.
Unattended children could use the
electric window switches and get
trapped by the window.
WARNING
To avoid injuring an occupant by win-
dow entrapment, be sure no part of
the occupant’s body such as hands
or head is in the path of the electric
window when closing it.
The function may not detect the
object depending on size, hardness,
and position of the object caught by
the closing window.
2-22
BEFORE DRIVING
NOTE:
Even if you cannot close the window by the
auto-up feature because there may be
something wrong with the pinching preven-
tion function, you can close the window by
holding the window switch in the “Up” posi-
tion.
If you drive in extreme off-road condition,
the pinching prevention function may oper-
ate accidentally because the window react
to vehicle jolting.
The Pinching Prevention Function Ini-
tialization
When you disconnect and re-connect the
battery or replace the fuse, the function will
be deactivated. In this condition, the auto-
down feature will be deactivated, while the
auto-up feature may remain being acti-
vated. The pinching prevention function
needs to be initialized.
To initialize the pinching prevention func-
tion, use the following procedure:
1) Turn the ignition switch to the “ON”
position or press the engine switch to
change the ignition mode to “ON”.
2) Open the driver’s window fully by hold-
ing the window switch in the “Down”
position.
3) Close the driver’s window by holding
the switch in the “Up” position, and
keep holding the switch for 2 seconds
after the window fully closed.
4) Check the driver’s window if the auto-
down/up feature work.
If the auto-down/up feature would not work
after initialization, there might be some-
thing wrong with the pinching prevention
function. Have your vehicle inspected by
an authorised Maruti Suzuki workshop.
Mirrors
Inside Rearview Mirror
68LMT0205
68PH00228
(2) Day driving
(3) Night driving
You can adjust the inside rearview mirror
by hand so as to see the rear of your vehi-
cle in the mirror. To adjust the mirror, set
the selector tab (1) to the day position,
then move the mirror up, down or sideways
by hand to obtain the best view.
CAUTION
• The pinching prevention function
does not act while you are holding
the window switch in the “Up”
position.
• The pinching prevention function
may not detect an object caught in
the window just before the window
is fully closed.
WARNING
Whenever you disconnect and recon-
nect the battery or replace the fuse,
the pinching prevention function
needs to be reinitialized.
The pinching prevention function will
not be activated until the initialization
complete.
(1)
(2) (3)

Related Topics

Popular Owner Manuals