BEFORE DRIVING
Lane change signal
Turn Signal Operation
Hazard Warning Switch
With the ignition switch in the “ON” position
or the ignition mode “ON”, move the lever
up or down to activate the right or left turn
signals.
EXAMPLE
Normal turn signal
EXAMPLE
58MST0216
68LM235
Some times, such as when changing
lanes, the steering wheel is not turned far
enough to cancel the turn signal. For con-
venience, you can flash the turn signal by
moving the lever part way and holding it
there. The lever will return to its normal
position when you release it.
Push in the hazard warning switch to acti-
vate the hazard warning lights. All turn sig-
nal lights and both turn signal indicators
will flash simultaneously. To turn off the
lights, push the switch again.
Use the hazard warning lights to warn
other traffic during emergency parking or
when your vehicle could otherwise become
a traffic hazard.
EXAMPLE
58MST0215
Move the lever all the way upward or down-
ward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
2-57
58MS0-14E
English 
