BEFORE DRIVING
Driving range
Odometer
To change the time indication:
If you selected driving range the last time
you drove the vehicle, the display indicates
“---” for a few seconds and then indicates
the current driving range when the ignition
switch is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”.
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
display (D) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
1) Push the trip meter selector knob (1)
and the indicator selector knob (2)
together.
2) To change the hour indication, turn the
indicator selector knob (2) left or right
repeatedly when the hour indication
blinks. To change the hour indication
quickly, turn and hold the indicator
selector knob (2). To set the hour indi-
cation, push the indicator selector knob
(2) and the minute indication will blink.
3) To change the minute indication, turn
the indicator selector knob (2) left or
right repeatedly when the minute indi-
cation blinks. To change the minute
indication quickly, turn and hold the
indicator selector knob (2). To set the
minute indication, push the indicator
selector knob (2).
NOTICE
The driving range shown in the display is
the approximate distance you can drive
until the fuel gauge indicates “E”, based on
current driving conditions.
Keep track of your odometer reading
and check the maintenance schedule
regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
When the low fuel warning light comes on,
the display “---” will appear.
If the low fuel warning light comes on, fill
the fuel tank immediately regardless of the
value of driving range shown in the display.
Clock
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
display (E) shows the time.
As the driving range after refueling is cal-
culated based on the most recent driving
condition, the value is different each time
you refuel.
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
NOTE:
• If you refuel when the ignition switch is in
the “ON” position or the ignition mode is
changed to “ON”, the driving range may
not indicate the correct value.
• When you reconnect the negative (–) ter-
minal to the battery, the value of driving
range will be shown after driving for a
while.
Do not attempt to adjust the display
while driving.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the clock indication will
be reinitialized. Change the indication
again to your preference.
2-54
58MS0-14E
English 
