Fuel Recommendation: 1, 2
BEFORE DRIVING
NOTE:
Immobilizer System
Keys
If this light blinks, perform the following
operations:
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
EXAMPLE
(For vehicles without keyless push start
system)
Turn the ignition switch to the “LOCK” posi-
tion, then turn it back to the “ON” position.
(For vehicles with keyless push start sys-
tem)
Change the ignition mode to “LOCK”
(OFF), then change back to “ON”.
If the light still blinks with the ignition switch
turned to the “ON” position or the ignition
mode changed to “ON”, there may be
something wrong with your key or with the
immobilizer system. Ask your SUZUKI
dealer to inspect the system.
The engine can be started only with your
vehicle’s original immobilizer ignition key
which has an electronic identification code
programmed into it. The key communi-
cates the identification code to the vehicle
when the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to
“ON”. If you need to make spare keys, see
your SUZUKI dealer. The vehicle must be
programmed with the correct identification
code for the spare keys. A key made by an
ordinary locksmith will not work.
54G489
Your vehicle comes with a pair of identical
keys. Keep the spare key in a safe place.
One key can open all of the locks on the
vehicle.
NOTE:
• If you lose your immobilizer ignition key,
see your SUZUKI dealer as soon as pos-
sible to have the lost one deactivated,
then have the new key made by them.
• If you own other vehicles with immobi-
lizer keys, keep those keys away from
the ignition switch or the engine switch
when using your SUZUKI, or the engine
may not be started because they may
interfere with your SUZUKI’s immobilizer
system.
The key identification number is stamped
on a metal tag provided with the keys or on
the keys. Keep the tag (if equipped) in a
safe place. If you lose your keys, you will
need this number to have new keys made.
Write the number below for your future ref-
erence.
80JM122
If the immobilizer/keyless push start sys-
tem warning light blinks when the ignition
switch is in the “ON” position or the ignition
mode is “ON”, the engine will not start.
KEY NUMBER:
• If you attach any metal objects to the
immobilizer key, it may not start the
engine.
2-1
58MS0-14E
English 
