156
Drivin g and Operation
For vehicles with Ea sytronic 3, the control
indicator flashes for a few seconds when
the ignition is turned off, if the handbrake
is not applied.
Anti-lock Brake System (ABS)
ABS continuously monitors the v ehicle’ s
brake system and prevents the wheels from
locking regardless of the road condition
and tyre grip.
9 Warning
It starts to regulate the braking pressure as
soon as a wheel shows a tendency to lock.
The vehicle rema ins steerable, even in the
event of very heavy braking, for instance
on bends or when swerving to avoid an
obstacle. Even in the c ase of full-on
braking, the ABS makes it possible to drive
round an obstacle without releasing the
brakes.
If the control indicator illuminates when
the handbrake is released, stop driving
immediately. Contact a workshop.
Picture no: 17894s.tif
ABS control is made apparent through a
pulse in the footbrake and the noise of the
regulation process.
Brak e sy stem control i ndicat or R
The control indicator illuminates after the
ignition is turned on, when the ha ndb ra ke
is applied or if the brake or clutch fluid level
is too low. Brake fluid – see page 232.
9 Warning
For optimum braking, keep the footbrake
fully depressed throughout the braking
process, despite the factthat the pedalis
pulsating. Do not reduce the pressure on
the pedal.
9 Warning
If the control indicator illuminates when
the handbrake is released, stop driving
immediately. Contact a workshop.
Do not let this special safety feature
tempt you into taking risks when driving.
Traffic safety can only be achieved by
adopting a responsible driving style.
English 
