2003-2010 Vauxhall Meriva SUV Driving and Operation -> Fuel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving and Operation -> Fuel for Your Vauxhall Meriva SUV First Generation (2003-2010)

142  
Drivin g and Operation  
Fuels with ethanol content greaterthan 5%  
do not comply w ith DIN EN 228 a nd must  
not b e used unless the vehicle ha s b een  
specifically developed and approved for  
these fuels.  
Fuel for diesel engi nes  
Fuel consumption  
Diesel engines must be operated only on  
commercially available diesel fuel meeting  
the specifications of DIN EN 590.  
Fuel consumption is determined under  
specific driving conditions – see page 212.  
Special equipment increases the weight of  
the vehicle. As a result, they can increase  
fuel consumption and reduce the specified  
maximum speed.  
Since January 2004, some oil companies  
have mixed their diesel fuel with up to 5%  
Bio fuel (FAME = Fatty Acid Methyl Esters)  
like RME (Rape-Oil Methyl Ester). This is in  
accordance with the current DIN EN 590  
and does not harm the fuel injection  
system. The characteristics of a diesel fuel  
mixed up with 5% Bio fuel (FAME) do not  
differ from conventional diesel fuel and do  
not influence the vehicles driveability.  
Fuel with too low an octane number can  
cause pinking. Vauxhall cannot be held  
liable for resulting damage.  
For the first few thousand miles /  
kilometres,friction between the engine and  
transmission components is higher. This  
increases fuel consumption.  
Petrol with a higher octane number can  
always be used.  
Do notuse 91 octane petrol in vehicles with  
the Z 16 LET1) engine.  
Fuel  
The ignition timing is automatically  
adjusted according to the grade of fuel  
used (octane number) – see page 208.  
Fuel for petrol engines  
Important: Diesel fuelmixed with 5% FAM E  
according to DIN EN 590 must not be  
confused with 100% Bio Diesel, which is not  
to be used in Vauxhall engines.  
Normal commercial high-quality fuels with  
a maximum ethanol content of 5% in  
accordance with DIN EN 228 are suitable  
(for catalytic converter see page 145, for  
octane numbers see page 208). The  
quality thereof has considerable effect on  
the performance, running and service life  
of the engine. The additives mixed with the  
fuel are extremely important. For this  
rea son you must only refuel with high-  
quality fuels containing additives.  
Use of petrol with an octane rating of 95  
will ensure economical driving.  
For vehicles with Z 16 LET1) engine, use of  
95 RON fuel reduces performance and  
torque.  
The flow and filterability of diesel fuel are  
temperature-dependent.  
Dieselfuels with improvedlow temperature  
properties are therefore a vailable on the  
market during the winter months. Make  
sure that you fill the tank with winter fuel  
before the start of the cold weather  
season.  
Additives can be used with diesel fuels with  
winter properties that are guaranteed by  
the manufacturer and when using diesel  
fuel filters that are heated depending on  
the outside temperature.  
Diesel fuels must not be diluted with fuels  
that are intended for petrol engines.  
1)  
Sales designation – see page 208.  

Related Topics

Popular Owner Manuals