Instruments and controls -> Displays for Your Vauxhall Vivaro Van Third Generation (2019-2026)

118  
Instruments and controls  
A door, the tailgate or the tailgate  
window is open.  
Displays  
If the vehicle is equipped with hinged  
doors, O is not illuminated when it is  
open.  
Driver Information Centre  
The Driver Information Centre is  
located in the instrument cluster.  
Driver Information Centre indicates:  
overall and trip odometer  
digital speed indication  
trip / fuel information menu  
gear shift indication  
service information  
Press button.  
vehicle and warning messages  
driver assistance messages  
pop-up messages  
Selecting menus and functions  
There are several ways to toggle  
between the respective menus and  
functions:  
Move thumb wheel upwards or  
downwards on the steering wheel.  
Instruments and controls  
119  
Baselevel instrument cluster  
Press SET 000.  
Cluster electric vehicle  
Uplevel instrument cluster  
Press F.  
Press 000.  
Press 000.  
Vehicle and service messages are  
popped up in the Driver Information  
Centre, if required. Scroll messages  
by using the above mentioned  
controls or buttons.  
Midlevel instrument cluster  
Vehicle messages 3 126.  
120  
Instruments and controls  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
To reset, press F for a few  
seconds.  
Digital display of the instantaneous  
speed.  
Stop and Start time counter  
A time counter adds up the time spent  
in Autostop during a journey.  
It resets to zero everytime the ignition  
is switched on.  
Compass  
Displays the geographic direction of  
driving.  
Trip / fuel information menu,  
baselevel display  
Average speed  
Display of average speed. The  
measurement can be reset at any  
time.  
To reset, press F for a few  
seconds.  
AdBlue range  
Press F repeatedly until the  
AdBlue menu is shown.  
Information pages:  
Fuel range  
Differerent pages with combined  
information can be selected.  
Select the required page:  
Indicates an estimate of the AdBlue  
level. A message indicates whether  
the level is sufficient or low.  
Range is calculated from current fuel  
level and current consumption. The  
display shows average values.  
After refuelling, the range is updated  
automatically after a brief delay.  
When the fuel level is low, a message  
appears on the display and the  
control indicator 2 in the fuel gauge  
illuminates 3 116.  
AdBlue 3 166.  
Trip pages:  
Trip odometer  
The recorded distance since the  
reset.  
To reset, press F for a few  
seconds.  
Average fuel consumption  
Instantaneous fuel consumption  
Display of the instantaneous  
consumption.  
Digital speed  
Instruments and controls  
121  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
To reset, press SET 000 for a few  
seconds.  
Digital display of the instantaneous  
speed.  
Stop and Start time counter  
A time counter adds up the time spent  
in Autostop during a journey.  
It resets to zero everytime the ignition  
is switched on.  
Compass  
Displays the geographic direction of  
driving.  
Trip / fuel information menu,  
midlevel display  
Average speed  
Display of average speed. The  
measurement can be reset at any  
time.  
To reset, press SET 000 for a few  
seconds.  
AdBlue range  
Information pages:  
Fuel range  
Press SET 000 repeatedly until the  
AdBlue menu is shown.  
Range is calculated from current fuel  
level and current consumption. The  
display shows average values.  
After refuelling, the range is updated  
automatically after a brief delay.  
When the fuel level is low, a message  
appears on the display and the  
control indicator 2 in the fuel gauge  
illuminates 3 116.  
Indicates an estimate of the AdBlue  
level. A message indicates whether  
the level is sufficient or low.  
Differerent pages with combined  
information can be selected.  
Select the required page:  
AdBlue 3 166.  
Trip pages:  
Trip odometer  
The recorded distance since the  
reset.  
To reset, press SET 000 for a few  
seconds.  
Average fuel consumption  
AdBlue range  
Press CHECK repeatedly until the  
AdBlue menu is shown.  
AdBlue range  
Instantaneous fuel consumption  
Display of the instantaneous  
consumption.  
Indicates an estimate of the AdBlue  
level. A message indicates whether  
the level is sufficient or low.  
Digital speed  
122  
Instruments and controls  
To reset, press 000 for a few seconds.  
Average speed  
Display of average speed. The  
measurement can be reset at any  
time.  
It resets to zero everytime the ignition  
is switched on.  
Compass  
Displays the geographic direction of  
driving.  
Trip / fuel information menu,  
uplevel display  
To reset, press 000 for a few seconds.  
AdBlue range  
Press 000 repeatedly until the AdBlue  
Information pages:  
Fuel range  
Range is calculated from current fuel  
level and current consumption. The  
display shows average values.  
After refuelling, the range is updated  
automatically after a brief delay.  
When the fuel level is low, a message  
appears on the display and the  
control indicator 2 in the fuel gauge  
illuminates 3 116.  
menu is shown.  
Indicates an estimate of the AdBlue  
level. A message indicates whether  
the level is sufficient or low.  
AdBlue 3 166.  
Trip / autonomy information  
menu, display electric vehicle  
Differerent pages with combined  
information can be selected.  
Differerent pages with combined  
information can be selected.  
Select the required page:  
Trip pages:  
Select the required page:  
Instantaneous fuel consumption  
Trip odometer  
The recorded distance since the  
reset.  
To reset, press 000 for a few seconds.  
Average fuel consumption  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
Information page:  
Average consumption of electric  
energy  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
Display of the instantaneous  
consumption.  
Digital speed  
Digital display of the instantaneous  
speed.  
Stop and Start time counter  
A time counter adds up the time spent  
in Autostop during a journey.  
To reset, press 000 for a few seconds.  
Instruments and controls  
Radio (Infotainment system)  
123  
Trip pages:  
Digital speed page  
Digital display of the instantaneous  
speed.  
Average speed  
Display of average speed. The  
measurement can be reset at any  
time.  
To reset, press 000 for a few seconds.  
Average consumption of electric  
energy  
Info Display  
The Info Display is located in the  
instrument panel near the instrument  
cluster.  
The Info Display can indicate:  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
To reset, press 000 for a few seconds.  
Trip odometer  
The recorded distance since the  
reset.  
To reset, press 000 for a few seconds.  
time 3 98  
outside temperature 3 98  
date 3 98  
Infotainment system, see  
description in the Infotainment  
Manual  
Press ) to switch on the display.  
Press MENU to select main menu  
page.  
Press fYZg to select a menu  
page.  
Press OK to confirm a selection.  
indication of rear view camera  
3 210  
Traffic sign assistant page  
Displays recognised traffic signs.  
indication of panoramic view  
system 3 207  
navigation, see description in the  
Infotainment Manual  
vehicle and system messages  
3 126  
settings for vehicle  
personalisation 3 127  
Press 1 to exit a menu without  
changing a setting.  
Flow page  
Displays the current energy flow  
within the electric system.  
Compass page  
Displays the geographic direction of  
driving.  
124  
Instruments and controls  
Touch required menu display icon or  
a function with the finger.  
Confirm a required function or  
selection by touching.  
Touch 3 or & on the display to exit  
a menu without changing a setting.  
For further information, see  
Infotainment Manual.  
Different colours show the engery  
flow.  
Multimedia / Multimedia Navi  
Selecting menus and settings  
There are three options to operate the  
display:  
green: electric engine operating  
blue: regenerating energy  
Average consumption  
This menu displays the average  
power consumption during the  
current trip.  
via buttons next to the display  
by touching the touchscreen with  
the finger  
via speech recognition  
green: electric energy consumed  
Speech recognition  
Description see Infotainment Manual.  
Button and touch operation  
blue: electric energy generated  
from the braking and  
Flow  
deceleration phases of the  
vehicle used to recharge the high  
voltage battery  
This menu displays the current  
energy flow within the electric system.  
The current trip is subdivided into time  
steps. For each time step, the  
average consumption is displayed.  
The time steps can be modified.  
Press ) to switch on the display.  
Press : to select system settings  
(units, language, time and date).  
Press _ to select vehicle settings or  
driving functions.  
1. Press m.  
2. Select Flow.  
Instruments and controls  
125  
plane directly ahead in driver's view.  
The image appears focused out  
toward the front of the vehicle.  
1. Press m.  
2. Select Statistics.  
Switching on  
Press § to switch on the head-up  
display.  
3. Press + and - to modify the time  
steps.  
Head-up display shows:  
Adjust position of head-up display  
image  
Press 7 or 8 to centre the image.  
It can only be adjusted up and down,  
not side to side.  
vehicle speed  
speed limits detected by the  
speed sign recognition  
set speed of speed limiter  
set speed of cruise control  
forward collision alert  
Vehicle personalisation 3 127.  
Head-up display  
The head-up display displays driver  
information concerning the  
instrument cluster onto a foldable  
9 Warning  
projection plane on the driver's side.  
navigation information.  
The information appears as an image  
projected from a lense in the  
instrument panel onto the projection  
If the head-up display image is too  
bright or too high in your field of  
view, it may obstruct your view  
126  
Instruments and controls  
Units  
when it is dark outside. Be sure to  
keep the head-up display image  
dim and placed low in your field of  
view.  
Vehicle messages  
Messages are indicated in the Driver  
Information Centre, in some cases  
together with a warning chime.  
Units can be changed in vehicle  
personalisation menu 3 127.  
Care of head-up display  
Adjust brightness  
Clean the screen of the head-up  
display with a soft cloth sprayed with  
glass cleaner. Wipe the lens gently,  
then dry it.  
The head-up display image will  
automatically dim and brighten to  
compensate for outside lighting.  
Brightness can also be adjusted  
manually as needed:  
System limitations  
Press § to brighten the display.  
Press $ to dim the display.  
Head-up display may not operate  
properly when:  
The lens in the instrument panel  
is covered by objects or not  
clean.  
The image can temporarily light up  
depending on angel and position of  
sunlight.  
Display brightness is too dim or  
Switching off  
Press $ and hold to turn the head-up  
display off.  
Press to confirm a message.  
bright.  
Image is not adjusted to the  
proper height.  
The driver wears polarized  
sunglasses.  
Vehicle and service messages  
The vehicle messages are displayed  
as text. Follow the instructions given  
in the messages.  
Language  
Preferred language can be set in  
vehicle personalisation menu 3 127.  
If the head-up image is not correct for  
other reasons, contact a workshop.