Get Instruments and controls -> Vehicle personalisation Guide for Vauxhall Vivaro Van Third Generation (2019-2026)

Instruments and controls

127

●

If an unintended lane change

occurs.

If the exhaust filter has reached

the maximum filling level.

Messages in the Info Display

Vehicle personalisation

The vehicle's behaviour can be

personalised by changing the settings

in the Info Display.

Depending on vehicle equipment and

country-specific regulations some of

the functions described below may

not be available.

Some important messages may

appear additionally in the

Info Display. Some messages only

pop-up for a few seconds.

When the vehicle is parked and /

or the driver's door is opened

●

Warning chimes

With exterior lights on.

If several warnings appear at the

same time, only one warning chime

will sound.

During an Autostop

●

Some functions are only displayed or

active when the engine is running.

If the driver's door is opened.

If any condition for a restart of the

engine is not fulfilled.

When starting the engine or whilst

driving

Radio (Infotainment system)

●

If a seat belt is not fastened.

If a door or the tailgate is not fully

closed.

●

If a certain speed is exceeded

with parking brake applied.

If a programmed speed or speed

limit is exceeded.

If a warning message appears in

the Driver Information Centre.

If the electronic key is not in the

passenger compartment.

Press MENU to open the menu page.

Use the arrow buttons to operate the

display:

If the parking assist detects an

object.

128

Instruments and controls

Select Personalisation-configuration

●

Comfort

Multimedia

I OK.

Ambient lighting: Adjusts the

brightness of the ambient

lighting.

Rear wiper in reverse gear:

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

Unit settings

Select Display configuration I OK.

Select Choise of units I OK.

Select desired settings I OK.

Language settings

Select Display configuration I OK.

Select Choise of language I OK.

Select desired language I OK.

Vehicle

Unlocking boot only: Activation /

deactivation.

Plip action: Driver / all doors.

Security

Fatigue Detection system:

Activates or deactivates the

driver drowsiness system.

Vehicle settings

Press : to open settings menu.

●

Select Define vehicle parameters I

OK.

Unit settings

Select System configuration.

Change units for Distance and fuel

consumption and Temperature.

In the corresponding submenus the

following settings can be changed:

Driving assistance

●

Lamps

Speed recommendation:

Activates or deactivates the

function.

Follow me home headlamps:

Activates or deactivates the

function and adjusts its duration.

Welcome lighting: Activates or

deactivates the function and

adjusts its duration.

Language settings

Select Language.

Change language by touching the

respective entry.

Driving function

Press _.

Select Driving function.

Directional headlights: Activates

or deactivates the function.

Instruments and controls

129

In the corresponding submenus the

following settings can be changed:

●

Type the new speed value via the

keypad and confirm with A /

OK.

Confirm with A / OK once more

to exit the menu.

Welcome lighting: Activates or

deactivates the function and

adjusts its duration.

●

Parking sensors: Activates or

deactivates the parking assist

sensors.

Directional headlamps: Activates

or deactivates the cornering

lights.

●

Blind spot sensors: Activates or

Vehicle settings

Press _.

Select Vehicle settings.

In the corresponding submenus the

following settings can be changed:

●

deactivates side blind spot alert.

●

Comfort

Under-inflation initialization:

Initialises the tyre under-inflation

detection system.

Mood lighting: Adjusts the

brightness of the ambient

lighting.

●

Diagnostic: Shows alert

messages of the diagnostic

system.

Safety

Parking

Speed reading/recommendation:

Activates or deactivates the

speed limit information by traffic

sign recognition.

Active safety brake: Activates or

deactivates active emergency

braking, the alert distance for risk

of collision can be selected.

Mirror adaptation in reverse:

Adjusts the exterior mirrors if

reverse gear is engaged to

facilitate pavement visibility.

Driver's attention warning:

Activates or deactivates the

driver drowsiness system.

Prevention of door mirror folding:

Activates or deactivates the

automatic folding of the exterior

mirrors.

Rear wiper in reverse: Activates

or deactivates automatic

switching on of the rear window

wiper when reverse gear is

engaged.

Memorising of preset speeds

This feature enables to define and

memorise up to six speed settings for

cruise control and speed limiter. By

default, a few speeds are already

memorised.

●

Press _.

Select Adjusting speeds.

Select Cruise control or Speed

limiter.

●

Headlights

Guide-me-home lighting:

Activates or deactivates the

function and adjusts its duration.

●

Select the speed setting to be

changed.

130

Instruments and controls

Driving functions

●

Under-inflation initialization:

Initialises the tyre under-inflation

detection system.

Diagnostic: Shows alert

messages of the diagnostic

system.

Multimedia Navi

Press _.

Select Driving functions.

In the corresponding submenus the

following settings can be changed:

●

Automatic headlamp dipping:

Activates or deactivates high

beam assist.

Lane departure warning system:

Activates or deactivates lane

departure warning.

Memorising of preset speeds

This feature enables to define and

memorise up to six speed settings for

cruise control and speed limiter. By

default, a few speeds are already

memorised.

●

Stop and start: Activates or

Press _.

Select Adjusting speeds.

Select Cruise control or Speed

limiter.

deactivates stop-start system

Press : to open settings menu.

Cruise control active: Activates or

deactivates semi-adaptive cruise

control.

Unit settings

Select System settings in the options

●

Parking sensors: Activates or

deactivates the parking assist

sensors.

menu.

Change units for Distance and fuel

consumption and Temperature.

Confirm with A / OK.

●

Blind spot sensors: Activates or

deactivates side blind spot alert.

Language settings

Select Languages.

Change language by touching the

respective entry.

Traction control: Activates or

deactivates Traction Control

system.

Confirm with A / OK.

Instruments and controls

131

●

Select the speed setting to be

changed.

Type the new speed value via the

keypad and confirm with A /

OK.

Confirm with A / OK once more

to exit the menu.

Welcome lighting: Activates or

deactivates the function and

adjusts its duration.

Directional headlamps: Activates

or deactivates the cornering

lights.

Driver's attention warning:

Activates or deactivates the

driver drowsiness system.

●

Vehicle access

Hands-free auto locking:

Activates or deactivates the

function.

Vehicle settings

Press _.

Select Vehicle settings.

In the corresponding submenus the

following settings can be changed:

●

Comfort

Mood lighting: Adjusts the

brightness of the ambient

lighting.

Parking

Safety

Rear wiper in reverse: Activates

or deactivates automatic

switching on of the rear window

wiper when reverse gear is

engaged.

Traffic Signs Recognition:

Activates or deactivates the

speed limit information by traffic

sign recognition.

Blocking of door mirror folding:

Activates or deactivates the

automatic folding of the exterior

mirrors.

Active safety brake: Activates or

deactivates active emergency

braking, the alert distance for risk

of collision can be selected.

●

Headlights

Mirror adaptation in reverse:

Adjusts the exterior mirrors if

reverse gear is engaged to

facilitate pavement visibility.

Guide-me-home lighting:

Activates or deactivates the

function and adjusts its duration.

Instruments and controls -> Vehicle personalisation for Your Vauxhall Vivaro Van Third Generation (2019-2026)

Related Topics

Instruments and controls

Popular Owner Manuals

Latest Owner Manuals