Instruments and controls -> Warning lights, gauges and indicators for Your Vauxhall Vivaro Van Third Generation (2019-2026)

100  
Instruments and controls  
Do not damage the outlet by using  
unsuitable plugs.  
Stop-start system 3 161.  
Infotainment system. For further  
information, see Infotainment  
Manual.  
Warning lights, gauges  
and indicators  
Notice  
Instrument cluster  
USB port  
The sockets must always be kept  
clean and dry.  
Depending on the version, three  
instrument clusters are available:  
Baselevel  
Midlevel  
Uplevel  
A USB port is located in the  
instrument panel.  
A USB port may be located within the  
compartment located above the  
glovebox.  
A further USB port may be located in  
the rear console.  
The USB ports are prepared for  
charging external devices and  
provide a data connection to the  
Instruments and controls  
101  
Baselevel instrument cluster  
102  
Instruments and controls  
Midlevel instrument cluster  
Instruments and controls  
103  
Uplevel instrument cluster  
104  
Instruments and controls  
Cluster electric vehicle  
X
h
i
1
D
A
B
G
System check 3 113  
Parking brake 3 113  
Exterior light 3 116  
Low beam 3 116  
Antilock brake system  
(ABS) 3 114  
High beam 3 116  
High beam assist 3 116  
Front fog lights 3 117  
Rear fog light 3 117  
Rain sensor 3 117  
Y Z Gear shifting 3 114  
Q
Lane departure warning  
3 114  
H
y
J
Electronic Stability Control  
Overview  
and Traction Control  
,
Side blind spot alert 3 117  
Cruise control 3 117  
1
Turn lights 3 111  
system 3 114  
v
a
Seat belt reminder 3 111  
z
Preheating 3 115  
Q
Semi-adaptive cruise  
control 3 117  
d
Airbag and belt tensioners  
3 111  
+
Exhaust filter 3 115  
B
AdBlue 3 115  
5
Speed limiter 3 117  
e
Airbag deactivation 3 112  
Charging system 3 112  
q
Tyre deflation detection  
system 3 115  
m
Active emergency braking  
3 117  
S
W
Malfunction indicator light  
3 112  
T
Engine oil pressure 3 115  
O
Door open 3 117  
r 2  
Low fuel 3 116  
i
Service vehicle soon  
3 112  
C
Service vehicle soon  
3 112  
V 2 Engine coolant tempera‐  
ture high 3 114  
j
Charge cord connected  
3 116  
LED headlights 3 117  
ñ
Autostop 3 116  
STOP Stop engine 3 112  
Instruments and controls  
Baselevel instrument cluster  
105  
Odometer  
READY Vehicle ready 3 116  
M
Reduced engine power  
3 116  
K
Pedestrian safety alert  
fault3 117  
N
Battery gauge 3 107  
Speedometer  
Trip odometer counts up to  
9,999.9 miles without automatic  
reset.  
The total recorded distance is  
displayed in miles.  
Press F for 2 seconds to reset  
trip odometer.  
Trip odometer  
The recorded distance since the last  
reset is displayed in the Driver  
Information Centre.  
Indicates vehicle speed.  
106  
Instruments and controls  
Midlevel instrument cluster  
Uplevel instrument cluster  
Tachometer  
Trip odometer counts up to  
9,999.9 miles without automatic  
reset.  
Press SET 000 for 2 seconds to reset  
trip odometer.  
Trip odometer counts up to  
1,999.9 miles and resets then  
automatically.  
Press 000 for 2 seconds to reset trip  
odometer.  
Displays the engine speed.  
Drive in a low engine speed range for  
each gear as much as possible.  
Caution  
Driver Information Centre 3 118.  
If the needle is in the red warning  
zone, the maximum permitted  
engine speed is exceeded. Engine  
at risk.  
Fuel gauge  
Displays the fuel level in the tank.  
Never run the fuel tank dry.  
Instruments and controls  
107  
The arrow indicates the vehicle side  
where the fuel filler flap is located.  
Midlevel and uplevel instrument  
cluster  
High voltage battery gauge  
Because of the fuel remaining in the  
tank, the top-up quantity may be less  
than the specified tank capacity.  
Baselevel cluster  
The high voltage battery gauge  
displays the charging level of the high  
voltage battery.  
If the control indicator 2 illuminates  
yellow, refuel the tank immediately.  
A scale consisting of white segments  
shows the fuel level.  
If the control indicator r illuminates  
yellow, refuel the tank immediately.  
108  
Instruments and controls  
If the drive mode Eco mode is  
selected, the performance of the  
thermal consumers is reduced. The  
needle of the comfort consumption  
gauge is in the ECO zone.  
Power indicator gauge  
Comfort consumption  
gauge  
Engine coolant temperature  
gauge  
Displays the coolant temperature.  
Caution  
If engine coolant temperature is  
too high, stop vehicle, switch off  
engine. Danger to engine. Check  
coolant level.  
The power indicator gauge informs  
about the current energy situation of  
the vehicle.  
Charge : High voltage battery is  
being charged with energy  
resulting from braking or  
The comfort consumption gauge  
informs about the current electric  
consumption caused by the following  
thermal consumers:  
heating  
deceleration of the vehicle  
air conditioning  
heated windscreen  
heated rear window  
heated seats  
Eco  
: An optimum in energy is  
accessible in all driving  
modes  
Power : Vehicle is driven in a  
dynamic driving style with  
focus on performance  
Instruments and controls  
Engine oil level monitor  
109  
Baselevel cluster  
Midlevel and uplevel instrument  
cluster  
The state of the engine oil level is  
displayed in the Driver Information  
Centre for a few seconds following  
the service information after switching  
on the ignition.  
A proper state of engine oil level is  
confirmed.  
If engine oil level is low, T flashes  
and warning message is indicated in  
the Driver Information Centre.  
Depending on the version, D  
flashes in the Driver Information  
Centre. Confirm engine oil level by  
using the oil dipstick and top up  
engine oil respectively.  
A scale consisting of white segments  
shows the engine coolant  
temperature.  
If the engine coolant temperature is  
too high, the control indicator V  
illuminates red.  
70 °C  
90 °C  
: engine operating  
temperature not yet  
reached  
Engine oil 3 237.  
: normal operating  
temperature  
A fault of measurement is indicated  
by E or a message in the Driver  
Information Centre together with  
T. Check engine oil level manually  
by using the dipstick.  
red zone : temperature too high  
Switch off engine immediately.  
Control indicator 2 illuminates if  
coolant temperature is too high.  
Switch off engine immediately.  
Service display  
The service system informs when to  
change the engine oil and filter or a  
vehicle service is required. Based on  
110  
Instruments and controls  
driving conditions, the interval at  
which an engine oil and filter change  
is required can vary considerably.  
the distance travelled since the due  
date is indicated in the Driver  
Information Centre.  
A disappears  
Retrieving service information  
Service information 3 281.  
Overdued service is indicated by a  
message in the Driver Information  
Centre which indicates the overdued  
distance. A flashes and then  
illuminates permanently until service  
is executed. Additionally, the control  
indicator C or SERVICE  
To retrieve the status of the service  
information at any time press F,  
G or CHECK.  
The service information is displayed  
for a few seconds.  
Instrument cluster 3 100.  
Service information 3 281.  
A required service due is displayed in  
the Driver Information Centre for  
several seconds after switching on  
the ignition.  
If no service is required for the next  
1800 miles or more no service  
illuminates.  
information appears in the display.  
If service is required within the next  
1800 miles, A illuminates temporary  
as reminder. Simultaneously, the  
remaining distance or time duration is  
indicated for several seconds.  
Depending on the version, the  
distance travelled since the due date  
is indicated in the Driver Information  
Centre.  
Reset of service interval  
Control indicators  
After each service, the service  
indicator must be reset to ensure  
proper functionality. It is  
The control indicators described are  
not present in all vehicles. The  
description applies to all instrument  
versions. Depending on the  
recommended to seek the assistance  
of a workshop.  
equipment, the position of the control  
indicators may vary. When the  
ignition is switched on, most control  
indicators will illuminate briefly as a  
functionality test.  
If service is executed by yourself,  
operate as following:  
switch off ignition  
press and hold F, G or  
CHECK  
If service is required in less than  
600 miles, A flashes and then  
illuminates permanently. Remaining  
distance or time duration is indicated  
for several seconds. Simultaneously,  
the remaining distance or time  
The control indicator colours mean:  
red  
: danger, important reminder  
switch on ignition, the distance  
yellow : warning, information, fault  
green : confirmation of activation  
blue : confirmation of activation  
indication begins a countdown  
when the display indicates =0,  
release the button and  
duration is indicated for several  
seconds. Depending on the version,  
Instruments and controls  
111  
white : confirmation of activation  
grey : system paused, at least one  
system limitation has been  
detected  
Airbag and belt tensioners  
d illuminates yellow.  
When the ignition is switched on, the  
control indicator illuminates for  
several seconds. If it does not  
illuminate, does not extinguish after  
several seconds or illuminates whilst  
driving, there is a fault in the airbag  
system. Seek the assistance of a  
workshop. The airbags and belt  
pretensioners may fail to trigger in the  
event of an accident.  
See all control indicators on different  
instrument clusters 3 100.  
Turn lights  
1 flash green.  
Flash  
After the ignition has been switched  
on, a illuminates until the seat belt  
has been fastened.  
When driving faster than 12 mph and  
a seat belt is unfastened,a flashes in  
the overhead console for the  
respective seat and a chime is  
audible.  
Aditionally, a illuminates in the  
instrument cluster.  
After two minutes, the chime goes off  
and a illuminates constantly in the  
overhead console until the seat belt of  
the respective seat is fastened.  
Turn lights or the hazard warning  
flashers are activated.  
Rapid flashing: failure of a turn light or  
associated fuse, failure of turn light on  
trailer.  
Bulb replacement 3 243.  
Turn lights 3 138.  
Deployment of the belt pretensioners  
or airbags is indicated by continuous  
illumination of d.  
9 Warning  
Have the cause of the fault  
remedied immediately by a  
workshop.  
Seat belt reminder  
Belt pretensioners 3 56.  
Airbag system 3 60.  
a illuminates or flashes in the  
instrument cluster and in the  
overhead console.  
112  
Instruments and controls  
Illuminates when the engine is  
running  
Flashes when the engine is  
running  
Airbag deactivation  
Stop, switch off engine. Vehicle  
battery is not charging. Engine  
cooling may be interrupted. The  
brake servo unit may cease to be  
effective. Seek the assistance of a  
workshop.  
Fault that could lead to catalytic  
converter damage. Ease up on the  
accelerator until the flashing stops.  
Seek the assistance of a workshop  
immediately.  
Service vehicle soon  
Malfunction indicator light  
C or SERVICE illuminates yellow.  
W illuminates or flashes yellow.  
Illuminates briefly when the ignition is  
switched on.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
May illuminate together with other  
control indicators and a  
H ON illuminates yellow.  
The front passenger airbag is  
activated.  
gOFF illuminates yellow.  
The front passenger airbag is  
deactivated.  
corresponding message in the Driver  
Illuminates when the engine is  
running  
Fault in the emission control system.  
The permitted emission limits may be  
exceeded. Seek the assistance of a  
workshop immediately.  
Information Centre.  
Seek the assistance of a workshop  
immediately.  
Airbag deactivation 3 64.  
Stop engine  
STOP illuminates red.  
Charging system  
Illuminates briefly when the ignition is  
switched on.  
S illuminates red.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
Instruments and controls  
Illuminates  
113  
Illuminates together with other control  
indicators, accompanied by a warning  
chime and a corresponding message  
in the Driver Information Centre.  
Illuminates when the manual parking  
brake is applied and ignition is  
switched on 3 177.  
Electric parking brake has a fault  
3 177.  
Stop engine immediately and seek  
Electric parking brake  
9 Warning  
the assistance of a workshop.  
j illuminates or flashes red.  
Have the cause of the fault  
remedied immediately by a  
workshop.  
Illuminates  
Electric parking brake is applied  
3 177.  
System check  
X illuminates yellow.  
Illuminates together with STOP.  
Automatic operation of  
electric parking brake off  
o illuminates yellow.  
A major engine fault has been  
detected.  
Stop engine as soon as possible and  
seek the assistance of a workshop.  
Flashes  
Electric parking brake is not applied  
automatically. The application or the  
release are faulty.  
Illuminates  
Automatic operation is deactivated or  
faulty. In the event of a fault, o  
illuminates together with other control  
indicators or it is accompanied by a  
corresponding message in the Driver  
Information Centre.  
Activate automatic operation again or  
have the cause remedied by a  
workshop in the event of a fault.  
Brake system  
9 Warning  
h illuminates red.  
Have the cause of the fault  
remedied immediately by a  
workshop.  
The brake fluid level is too low.  
9 Warning  
Electric parking brake fault  
Stop. Do not continue your  
journey. Consult a workshop.  
k illuminates yellow.  
Automatic operation 3 177.  
Parking brake  
h illuminates red.  
114  
Instruments and controls  
On some vehicles with manual  
transmission, the system suggests to  
shift into neutral position, when the  
activation of the stop-start system is  
recommended.  
Flashes  
Antilock brake system  
(ABS)  
The system is actively engaged.  
Engine output may be reduced and  
the vehicle may be braked  
i illuminates yellow.  
Illuminates for a few seconds after the  
ignition is switched on. The system is  
ready for operation when the control  
indicator extinguishes.  
If i does not extinguish after a few  
seconds, or if it illuminates while  
driving, there is a fault in the ABS. The  
brake system remains operational but  
without ABS regulation.  
automatically to a small degree.  
Electronic Stability Control and  
Traction Control system 3 181.  
Selective ride control 3 182.  
Lane departure warning  
Q flashes green.  
System recognises an unintended  
lane change.  
Lane departure warning 3 211.  
Engine coolant temperature  
V or 2 illuminates red.  
If i illuminates together with h, a  
fault with the electronic brake force  
distribution has been detected.  
Stop engine immediately and seek  
the assistance of a workshop.  
Electronic Stability Control  
and Traction Control system  
J illuminates or flashes yellow.  
Illuminates when the engine is  
running  
Stop, switch off engine.  
Illuminates  
Caution  
Antilock brake system 3 176.  
A fault in the system is present.  
Continued driving is possible. Driving  
stability, however, may deteriorate  
depending on road surface  
conditions.  
Have the cause of the fault remedied  
by a workshop.  
Coolant temperature too high.  
Gear shifting  
Check coolant level immediately  
3 238.  
If there is sufficient coolant, consult a  
workshop.  
Y or Z with the number of the gear  
is indicated, when shifting is  
recommended for fuel saving  
reasons.  
Instruments and controls  
115  
Preheating  
AdBlue  
Engine oil pressure  
T illuminates red.  
z illuminates yellow.  
B flashes or illuminates yellow.  
Preheating of diesel engine is  
activated. Only activates when  
outside temperature is low. Start the  
engine when control indicator  
extinguishes.  
Illuminates when the ignition is  
Illuminates yellow  
The remaining driving range is  
between 60 miles and 1500 miles.  
switched on and extinguishes shortly  
after the engine starts.  
Illuminates when the engine is  
running  
Flashes yellow  
The remaining driving range is  
between 0 miles and 60 miles.  
AdBlue level is low. Refill AdBlue  
soon to avoid prevention of the  
engine start.  
Exhaust filter  
Caution  
+ or C illuminates yellow,  
accompanied by a message in the  
Driver Information Centre and a  
chime.  
Engine lubrication may be  
interrupted. This may result in  
damage to the engine and / or  
locking of the drive wheels.  
AdBlue 3 166.  
The exhaust filter requires cleaning.  
Continue driving until the control  
1. Select neutral gear.  
indicator extinguishes.  
Deflation detection system  
2. Move out of the flow of traffic as  
quickly as possible without  
impeding other vehicles.  
q illuminates or flashes yellow.  
Illuminates temporarily  
Illuminates  
Tyre pressure loss in one or more  
wheels. Stop immediately and check  
tyre pressure.  
Start of saturation of the exhaust filter.  
Start cleaning process as soon as  
possible by driving at a vehicle speed  
of at least 40 mph.  
3. Switch off ignition.  
Illuminates constantly  
Indication of a low additive level. Seek  
the assistance of a workshop.  
Flashes  
Fault in system. Consult a workshop.  
Deflation detection system 3 261.  
Exhaust filter 3 165.  
116  
Instruments and controls  
The charging cable is still connected  
to the vehicle. The vehicle cannot be  
started.  
Disconnect the charging cable from  
the charging port and close the  
charging port flap.  
Flashes green  
Autostop is temporarily unavailable,  
or Autostop mode is invoked  
automatically.  
9 Warning  
When the engine is off,  
considerably more force is needed  
to brake and steer. During an  
Autostop the brake servo unit will  
still be operational.  
Stop-start system 3 161.  
Exterior light  
Vehicle ready  
Do not remove key until vehicle is  
stationary, otherwise the steering  
wheel lock could engage  
unexpectedly.  
F illuminates green.  
The exterior lights are on 3 134.  
READY illuminates green. The  
vehicle is ready to be driven.  
Reduced engine power  
Low beam  
Keep engine turned off and let the  
vehicle be towed to a workshop.  
M illuminates yellow.  
D illuminates green.  
Illuminated when low beam is on.  
The charging level of the high voltage  
battery is low. Only reduced engine  
power is available.  
Low fuel  
r or 2 illuminates yellow.  
Level in fuel tank is too low.  
Refuelling 3 225.  
High beam  
A illuminates blue.  
Autostop  
Illuminates when high beam is on or  
during headlight flash 3 135.  
ñ illuminates or flashes green.  
Bleeding the diesel fuel system  
3 241.  
Illuminates green  
Engine is in an Autostop.  
High beam assist  
Charging cable connected  
B illuminates green.  
j illuminates red.  
The high beam assist is activated  
3 135.  
Instruments and controls  
117  
Cruise control 3 184.  
Additionally, a warning message is  
displayed in the Driver Information  
Centre.  
Check the reason of the deactivation  
3 199 and in case of a system fault,  
seek the assistance of a workshop.  
LED headlights  
C illuminates and a warning  
message is displayed in the Driver  
Information Centre.  
Semi-adaptive cruise  
control  
Seek the assistance of a workshop.  
Q illuminates in the Driver  
Information Centre when semi-  
Flashes  
The system is actively engaged.  
adaptive cruise control is active.  
Front fog lights  
Semi-adaptive cruise control 3 191.  
G illuminates green.  
Depending on the situation, the  
vehicle may automatically brake  
moderately or hard.  
Forward collision alert 3 197.  
Front pedestrian protection 3 201.  
Active emergency braking 3 199.  
The front fog lights are on 3 138.  
Pedestrian safety alert fault  
K illuminates yellow.  
Rear fog light  
The pedestrian safety alert is not  
working.  
H illuminates yellow.  
The rear fog light is on 3 138.  
Side blind spot alert  
T illuminates green.  
The system is active 3 205.  
Rain sensor  
Speed limiter  
y illuminates green.  
5 illuminates in the Driver  
Information Centre when speed  
limiter is active. Set speed is indicated  
alongside 5 symbol.  
Illuminated when rain sensor position  
on wiper lever is selected.  
Active emergency braking  
m illuminates or flashes yellow.  
Cruise control  
Speed limiter 3 187.  
v illuminates in the Driver  
Illuminates  
The system has been deactivated or  
a fault has been detected.  
Information Centre when speed  
limiter is active. Set speed is indicated  
in the Driver Information Centre.  
Door open  
O illuminates red.