02 Instruments and controls
Cruise control*
Engaging the cruise control function
Increasing or decreasing speed
NOTE
02
Cruise control will not function at
speeds below 20 mph (30 km/h).
•
•
Momentary acceleration, for less than
1 minute (e.g. when passing another
car), does not affect cruise control oper-
ation. The car will automatically return
to the previously set speed when the
accelerator pedal is released.
Temporarily disengaging the cruise
control
Press 0 to temporarily disengage cruise
control.
•
CRUISEwill appear in the function display. The
currently set speed is stored in the system's
memory.
The cruise control buttons are located on the
left side of the steering wheel hub.
Use + or – in the following ways to increase or
decrease the vehicle's speed:
1. Press and hold down + or – until the vehicle
reaches the desired speed. This will
become the set speed when the button is
released.
NOTE
Cruise control is also automatically
disengaged:
This does not set the vehicle's speed.
If the speed drops below approximately
•
2. Press + or – for approximately a half sec-
ond and release the button to increase or
decrease vehicle speed by approximately
1 mph (1.6 km/h).
1.
Press the CRUISE button. CRUISE will
appear in the function display in the center
of the instrument panel.
20 mph (30 km/h) when driving uphill.
When the brake or clutch pedal is
depressed.
•
2. Press + or – to set the current speed.
If the gear selector is moved to position N.
•
CRUISE-ONwill be displayed.
72
* Option/accessory, for more information, see Introduction.
English 
