02 Instruments and controls
Mirrors
Use this control to adjust the driver's door
mirror.
Power door mirrors
02
Passenger's door mirror:
1. Press the R switch (a light in the switch will
go on) to activate the adjustment control.
Use this control to adjust the passenger's
door mirror.
2. After you have adjusted the mirror(s), press
the L or R switch again (the LED will go out)
to deactivate the adjustment control.
Storing the mirrors' position
The position of the door mirrors is stored when
the vehicle is locked. The next time the driver's
door is unlocked with the same remote key and
that door is opened within 2 minutes, the
optional power driver's seat and side door mir-
rors will automatically move to the position that
they were in when the doors were most
recently locked with the same remote key.
Magnetic zones
The mirror control switches are located on the
driver's door armrest.
3. Press button (1) for at least 3 seconds to
display the number of the current magnetic
zone.
Adjusting the mirrors
WARNING
4. Press button (1) repeatedly until the num-
ber for the required geographical area (1–
15) is displayed. "C" will be displayed
again.
Folding power door mirrors*
The mirrors can be folded in for parking/driving
in narrow spaces.
The mirrors should always be adjusted
prior to driving.
•
5. Drive slowly in a circle at a maximum speed
of 6 mph (10 km/h) until a compass direc-
tion is displayed.
Objects seen in the passenger's side
wide-angle door mirror are closer than
they appear to be.
•
Folding the mirrors in
1. Press down the L and R mirror control but-
tons on the driver's door at the same time.
Calibration is complete.
2. Release them after approximately one sec-
ond. The mirrors automatically fold in to the
fully retracted position.
Driver's door mirror:
–
Press the L button (a light in the switch will
go on) to activate the adjustment control.
80
* Option/accessory, for more information, see Introduction.
English 
