02 Instruments and controls
Trip computer
--- MPH ACTUAL SPEED (current speed
2. Press RESET (3).
•
•
in mph, Canadian models only)
--- MILES TO EMPTY TANK
02
DSTC-related information, see page 163
This function shows the approximate distance
that can be driven on the fuel remaining in the
tank. The calculation is based on average fuel
consumption during the last 20 miles (30 km)
of driving and the amount of fuel remaining in
the tank when the reading was taken.
NOTE
Warning messages from the car's monitor-
ing systems will override the trip computer
function.
When the message --- MILES TO EMPTY
TANK appears in the display, refuel as soon
as possible.
If a warning message is shown in the informa-
tion display while you are using the trip com-
puter:
MPG AVERAGE
1. Acknowledge the message by pressing the
This value indicates fuel consumption since the
last time the trip computer was reset, by press-
ing RESET (button 3). When the engine is
switched off, information on fuel consumption
is stored and remains in system memory until
RESET (button 3) is pressed again.
READ (button 1).
READ (press to acknowledge/confirm/
erase a message)
2. Press READ again to return to the trip
computer function.
Thumb wheel (used to scroll among the trip
computer menus)
Controls
RESET
MPG INSTANTANEOUS
The trip computer functions can be accessed
by twisting the thumb wheel (2) one step at a
time in either direction. Twisting a final time
returns you to the original function.
The trip computer stores information gathered
from several systems in your car and has four
menus (five on Canadian models) that can be
shown in the information display.
This value indicates the current fuel consump-
tion, based on readings taken once per sec-
ond. When the car is not moving, "----" will be
displayed.
Resetting
--- MILES TO EMPTY TANK
•
•
MPH AVERAGE SPEED
--.- MPG AVERAGE (average fuel consump-
tion) and --- MPH AVERAGE SPEED can be
reset.
This value indicates average speed since the
last time the trip computer was reset, by press-
ing RESET (button 3). When the engine is
switched off, information on average speed is
--.- MPG AVERAGE (average fuel con-
sumption)
--.- MPG INSTANTANEOUS (current fuel
consumption)
•
•
1. Select one of these functions.
--- MPH AVERAGE SPEED
70
English 
