02 Instruments and controls
Power moonroof*
Operating the moonroof
Sliding moonroof
Auto open/close
02
Open: Pull the switch as far back as possible
(to position 1) and release it to automatically
slide open the moonroof.
Close: Push the switch as far forward as pos-
sible (to position 4) and release it to automati-
cally close the moonroof.
Manual open/close
Open: Pull the switch back to the first stop
(position 2) and hold it until the moonroof has
opened to the position of your choice.
Close: Push the switch forward to the first stop
(position 3) and hold it until the moonroof has
closed to the position of your choice, or has
closed completely.
Moonroof control in the ceiling console
Auto open
Manual open
Manual close
Auto close
Tilt open
To operate the moonroof, the ignition key must
first be turned to the intermediate or drive posi-
tion (position I, II or the engine running). The
moonroof can be opened in two ways:
NOTE
If the moonroof is repeatedly obstructed
during auto-close operation, an overload
circuit breaker will temporarily halt moon-
roof function. The moonroof will return to
normal function after a brief cool-down
period.
Tilt position
Sliding moonroof
Tilt close
Tilt position
–
Open: Press the rear edge of the control
upward to position 5.
–
Close: Pull the rear edge of the control
down to position 6.
82
* Option/accessory, for more information, see Introduction.
English 
