15.2.3. The car's certified values for range and electricity
consumption
These are the certified values for your car's range and use of electrical power. However, range and electricity
consumption vary according to the circumstances and driving conditions. These values should not be
interpreted as an expected range but should primarily be used to compare different cars.
Procedure used to establish the values
The values in the table below are established in accordance with WLTP[1], which is an international test method performed in a
laboratory environment. The method uses drive cycles to simulate an average driving run of the car. Every drive cycle is determ-
ined by different conditions such as speed, time and mileage.
The standard is based on four drive cycle profiles with different average speeds:
Low speed
Urban driving
Medium speed
High speed
Suburban driving
Extra-urban driving
Motorway driving
Extra high speed
Symbol explanation
This is an explanation of the symbols used in the specification table below.
Certified value for the car's potential range (km)[2]
Urban and suburban driving.
.
Average value over all four drive cycle phases (urban, suburban, extra-urban and motorway driving).
Certified value for the car's electricity consumption (kWh/100 km). The value is an average over all four drive cycle phases (urban, suburban, extra-urban and
motorway driving).
Low value.
High value.
Specifications for range and electricity consumption
Twin Motor Performance
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
367 / 396
English 
