2025-2026 Volvo EX30 4 Door Specifications -> Powertrain specifications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Specifications -> Powertrain specifications for Your Volvo EX30 4 Door First Generation (2025-2026)

Product label  
The product label is located on the right-hand door pillar and will be visible when the door is opened.  
Examples of information you can find on the label:  
Vehicle identification number  
Weight information  
Note  
Labels depicted in this manual are generic representations of those found around your car. The manual only contains  
their location and what kind of information they hold. Find the actual label for specific information about your car.  
Tip  
For many markets, more information can also be found in the car's registration document.  
15.2. Powertrain specifications  
Find the specifications regarding your car's propulsion.  
These specifications provide details about what your car is capable of and certified for. They also specify data on relevant char-  
ging cables.  
15.2.1. Electric motor specifications  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
365 / 396  
Your car is powered by two electric motors (front and rear) and you can find the specifications here.  
Twin Motor Performance  
Front  
Electric motor type  
Electric motor model  
Max. power output  
Synchronous motor with permanent magnet  
TZ180XSB01  
kW  
hp  
115  
156  
Rated power (continuous power)  
Max. torque  
kW  
Nm  
lb-ft  
NꢀA  
200  
147  
Rear  
Electric motor type  
Electric motor model  
Max. power output  
Synchronous motor with permanent magnet  
TZ220XSA02  
200  
kW  
hp  
272  
Rated power (continuous power)  
Max. torque  
kW  
Nm  
lb-ft  
kW  
hp  
NꢀA  
343  
253  
Total car (system)  
Max. power output  
315  
428  
Rated power (continuous power)  
Max. torque  
kW  
Nm  
lb-ft  
NꢀA  
543  
400  
Note  
If data is missing it will be updated at a later stage.  
15.2.2. Performance  
You can find the car's top speed and acceleration time in the table below.  
Twin Motor Performance  
180 km/h (112 mph)  
Top speed  
3.6 seconds (3.4 seconds)  
Acceleration time 0ꢀ100 km/h (0ꢀ60 mph)  
Note  
If data is missing it will be updated at a later stage.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
366 / 396  
15.2.3. The car's certified values for range and electricity  
consumption  
These are the certified values for your car's range and use of electrical power. However, range and electricity  
consumption vary according to the circumstances and driving conditions. These values should not be  
interpreted as an expected range but should primarily be used to compare different cars.  
Procedure used to establish the values  
The values in the table below are established in accordance with WLTP[1], which is an international test method performed in a  
laboratory environment. The method uses drive cycles to simulate an average driving run of the car. Every drive cycle is determ-  
ined by different conditions such as speed, time and mileage.  
The standard is based on four drive cycle profiles with different average speeds:  
Low speed  
Urban driving  
Medium speed  
High speed  
Suburban driving  
Extra-urban driving  
Motorway driving  
Extra high speed  
Symbol explanation  
This is an explanation of the symbols used in the specification table below.  
Certified value for the car's potential range (km)[2]  
Urban and suburban driving.  
.
Average value over all four drive cycle phases (urban, suburban, extra-urban and motorway driving).  
Certified value for the car's electricity consumption (kWh/100 km). The value is an average over all four drive cycle phases (urban, suburban, extra-urban and  
motorway driving).  
Low value.  
High value.  
Specifications for range and electricity consumption  
Twin Motor Performance  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
367 / 396  
590  
599  
450  
445  
17.5  
18.0  
Note  
If data is missing in the table it will be updated at a later date.  
Certified values and actual values  
When driving, the car's range and electricity consumption can differ from the certified value indications. Some reasons for this  
may be:  
Driving style.  
Extra equipment and cargo affect the car's weight or air resistance.  
Non-standard wheels can increase rolling resistance and air resistance.  
High speed causes increased air resistance.  
Road, traffic and weather conditions.  
The general condition of the car.  
[1]  
Worldwide Harmonised Light-Duty Vehicles Test Procedure  
[2]  
The value should not be interpreted as an expected range. The range is difficult to achieve during normal driving.  
15.2.4. Charging cable specifications  
These specifications provide details about mode 2 charging cables. Mode 2 charging cables can be  
purchased from the Volvo Extras shop.  
-30 °C to 40 °C (-22 °F to 104 °F)  
Ambient temperature  
Residual-current device  
Mode 2 charging cables have a built-in residual-current device that protects the car and the user from electric shocks caused by  
system faults.  
Warning  
The residual-current device helps to protect the car's charging system, but there is no guarantee that an overload never  
occurs.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
368 / 396  
Important  
The residual-current device does not protect the household socket.  
Temperature monitoring  
The mode 2 cable is also equipped with a control unit, which has a built-in overtemperature monitoring function. This monitors  
the temperature of both the cable and the household socket.  
Important  
Avoid exposing the control unit and its plug connector to direct sunlight. The overheating protection in the plug  
connector may otherwise reduce or stop the charging of your car.  
15.2.5. Charging port labels and identifiers  
Your car has a number of identification labels that provide information about charging compatibility. There is  
also a label with information about the different charging port status on the charging lid.  
Charging compatibility identification  
You can find out if your car and the charging point are compatible by looking at the identification labels. The labels are given in  
accordance with the EN 17186 standard. The identification labels include a letter or letters. If a letter on the charging point  
match a letter on your car's identification labels, it means that they are compatible.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
369 / 396  
The identification labels are located in the charging port.  
Charging compatibility identification labels.  
The three identification labels letters indicate the types of charging point your car is compatible with. Your car has three letters  
defining compatibility. Details can be found in the EN 17186 standard.  
Identification label Charging type  
AC[1] charging type 2  
C
DC[2] charging (including Combined Charging System (CCS) Combo 2)  
K and L  
Charging statuses  
The label contains information about the different charging port statuses. The label is shown on the inside of the charging lid.  
[1]  
Alternating current  
[2]  
Direct current  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
370 / 396  
15.3. Wheel and tyre specifications  
Here you can find specific data for wheels and tyres applicable to your car.  
Note  
There are more recommendations regarding wheels and tyres that are important to be aware of.  
15.3.1. Approved tyre pressures  
You can find the approved tyre pressures for your car in the table below.  
The recommended pressure for factory-fitted tyres can be found on the tyre pressure label. It's located on the door pillar on the  
driver's side and is visible when the door is opened.  
Tyre size  
Load 1ꢀ3 persons  
Max load  
ECO pressure  
Front/rear  
kPa (psi)  
Front  
Rear  
Front  
Rear  
kPa (psi)  
kPa (psi)  
kPa (psi)  
kPa (psi)  
225ꢀ55 R18  
245ꢀ45 R19  
245ꢀ40 R20  
260 (38)  
260 (38)  
290 (42)  
290 (42)  
290 (42)  
15.3.2. Approved wheel and tyre sizes  
In some countries, approved sizes are not indicated by the car's registration documents. However, you can  
find all approved combinations of wheel rims and tyres below.  
Tyre  
Wheel rim  
7.5x18x46  
8x19x48.5  
8x20x48.5  
225ꢁ55 R18  
245ꢁ45 R19  
245ꢁ40 R20  
15.3.3. Minimum permitted load index and speed rating for  
tyres  
All tyres have specific speed and load limitations. Tyres must have a speed rating and load index that are  
equal to or higher than your car's maximum speed.  
Your tyre's specification must be at least equal to or greater than:  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
371 / 396  

Related Topics

Popular Owner Manuals