INSTRUMENTS AND CONTROLS
||
Selecting key position/level
Starting and stopping the engine
For information about starting/switching off the
engine, see Starting the engine (p. 270).
Seats, front
The car's front seats have different setting
options for optimum seating comfort.
Key position 0 - Unlock the car - This
means that the car's electrical system is at
level 0.
•
Towing
For important information about the remote con-
trol key during towing, see Towing (p. 315).
NOTE
To reach level I or II without starting the
engine - do not depress the brake/clutch
pedal when these key positions are due to be
selected.
Related information
Key positions (p. 80)
•
Key position I - With the remote control key
•
•
fully inserted into the ignition switch16
-
Briefly press START/STOP ENGINE.
Key position II - With the remote control
key fully inserted into the ignition switch16
Give a long17 press on START/STOP
ENGINE.
To adjust lumbar support*, turn the wheel18
.
-
Forward/backward: lift the handle to adjust
the distance to the steering wheel and ped-
als. Check that the seat is locked after
adjusting position.
Back to key position 0 - To return to key
position 0 from position II and I - Briefly
press on START/STOP ENGINE.
•
To raise/lower the front edge of seat cush-
ion*, pump up/down.
Audio system
Adjust backrest rake, turn the wheel.
For information on audio system functions with
remote control key removed, see the Sensus
Infotainment supplement.
Raise/lower the seat*, pump up/down.
Control panel for power seat*, see Seats,
front - electrically operated (p. 84).
16
Not required for cars with keyless start and lock system*.
Approx. 2 seconds.
Also applies to electrically operated seat.
17
18
82
* Option/accessory.
English 
