INSTRUMENTS AND CONTROLS
The trip computer display in the combined instru-
ment panel can be shifted to another option at
any time during the journey. One of the options
means that no trip computer is shown.
Trip computer - analogue combined
instrument panel
Information from the trip computer can be
shown in the combined instrument panel and
operated with the controls on the left-hand stalk
switch and with the combined instrument panel's
menu.
Controls
Trip computer
heading in com-
bined instru-
ment panel
Information
Checking and settings can be made immediately
after the combined instrument panel is automati-
cally illuminated in connection with unlocking. If
none of the controls are actuated within
approx. 30 seconds after the driver's door has
been opened then the instrument extinguishes,
after which either key position II or engine star-
ting is required in order to operate the trip com-
puter.
Long press on RESET
resets trip meter T1.
Trip meter T1
and total dist.
•
•
Long press on RESET
Trip meter T2
Information display and controls.
resets trip meter T2.
and total dist.
OK – opens the combined instrument pan-
el's menu, confirms messages or menu
selections.
For more information - see
the section"Range - dis-
tance to empty tank"
(p. 114).
Distance to
empty
Thumbwheel - browses between menu
options or trip computer options.
NOTE
If a warning message appears when the trip
computer is used then the message must first
be acknowledged before the trip computer
can be reactivated.
Current consumption.
Fuel con-
sumption
RESET - resets the current trip meter or
goes back out of the menu structure.
Long press on RESET
Average
speed
•
Trip computer alternative
Choose which trip computer should be shown in
the combined instrument panel:
resets Average
speed.
Acknowledge the message by briefly
•
pressing the indicator stalk OK button.
No trip com-
puter informa-
tion.
This option shows a blank
display and it also indicates
the beginning/end of the
loop.
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on RESET.
2. Turn the thumbwheel to browse between the
options and stop at the required heading.
116
English 
