2012-2019 Volvo V40 4 Door INSTRUMENTS AND CONTROLS -> Trip computer - digital combined instrument panel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

INSTRUMENTS AND CONTROLS -> Trip computer - digital combined instrument panel for Your Volvo V40 4 Door Second Generation (2012-2019)

INSTRUMENTS AND CONTROLS  
Trip computer - digital combined  
instrument panel  
The information from the trip computer can be  
shown in the combined instrument panel and  
operated with the controls on the left-hand stalk  
switch and with the combined instrument panel's  
menu.  
Trip computer alternative  
Choose which trip computer should be shown in  
the combined instrument panel:  
Controls  
1. To ensure that no control is in the middle of  
a sequence - reset them first with  
two presses on RESET.  
2. Turn the thumbwheel to browse between the  
heading combinations.  
Checking and settings can be made immediately  
after the combined instrument panel is automati-  
cally illuminated in connection with unlocking. If  
none of the trip computer's controls are actuated  
within approx. 30 seconds after the driver's door  
has been opened then the instrument extin-  
guishes, after which either key position II or  
engine starting is required in order to operate the  
trip computer.  
3. Stop at the required combination for the con-  
stant display of this trip data in the combined  
instrument panel.  
The trip computer display in the combined instru-  
ment panel can be shifted to another option at  
any time during the journey. One of the options  
means that no trip computer is shown.  
Three trip computer options can be displayed simultane-  
ously – one in each "window".  
OK - opens the combined instrument panel's  
menu, confirms messages or menu selec-  
tions.  
NOTE  
Thumbwheel - browses between menu  
options or trip computer options.  
If a warning message appears when the trip  
computer is used then the message must first  
be acknowledged before the trip computer  
can be reactivated.  
RESET - resets the current trip meter or  
goes back out of the menu structure.  
Acknowledge the message by briefly  
pressing the indicator stalk OK button.  
Heading combinations  
Information  
Average  
Trip meter T1 + Meter reading  
Average speed  
Long press on RESET resets trip meter T1.  
Long press on RESET resets trip meter T2.  
Instantaneous Trip meter T2 + Meter reading Distance to empty tank  
118  
INSTRUMENTS AND CONTROLS  
Heading combinations  
Meter reading  
Information  
km/h<>mphA  
Instantaneous  
km/h<>mph - "Reverse digital speed display", see Trip computer (p. 114).  
No trip computer information.  
This option extinguishes all three trip computer displays and it also indicates the  
beginning/end of the loop.  
A
Only certain markets.  
Resetting the trip computer  
Trip meter  
1. Turn the thumbwheel and stop at the head-  
ing combination with the trip meter to be  
reset.  
2. One long press on RESET resets the value  
for the selected heading.  
Average speed and average consumption  
1. Press OK to open the combined instrument  
panel's menu.  
2.  
Browse to the Trip computer reset menu  
option with the thumbwheel and confirm with  
OK.  
3. Choose to reset average consumption, aver-  
age speed or to reset both, and confirm your  
selection with OK.  
4. Finish by pressing RESET.  
Related information  
Trip computer (p. 114)  
Trip computer - trip statistics* (p. 120)  
* Option/accessory. 119  

Related Topics

Popular Owner Manuals