2012-2019 Volvo V40 4 Door STARTING AND DRIVING -> Drive mode ECO* User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

STARTING AND DRIVING -> Drive mode ECO* for Your Volvo V40 4 Door Second Generation (2012-2019)

STARTING AND DRIVING  
exceptions for certain engines. However, it is  
easily verified by means of both the combined  
instrument panel's ECO symbol and the ECO  
button's lamp illuminating when the function is  
activated.  
Drive mode ECO*  
NOTE  
ECO5 drive mode is a function for automatic  
cars, optimising the car's driving characteristics  
for greater fuel economy and more eco-friendly  
driving.  
When the ECO function is activated, several  
parameters in the climate control system's  
settings are changed, and several electricity  
consumer functions are reduced. Certain set-  
tings can be reset manually, but full function-  
ality is only restored by deactivating the ECO  
function.  
Activate and deactivate ECO drive mode  
Press the button to activate or  
deactivate the function. An indi-  
cator in the button illuminates  
General  
The following characteristics  
are adapted when activating  
ECO drive mode:  
when the function is activated.  
Operation  
Disengaged ECO function is indicated by the  
combined instrument panel ECO symbol and the  
ECO button lamp extinguishing. The function is  
then switched off until it is reactivated with the  
ECO button.  
Gearbox gearshift points.  
Engine management and response from the  
accelerator pedal.  
Start/Stop function - the engine can also  
auto-stop before the car has stopped down  
to being completely stationary.  
Eco Coast - Function  
The Eco Coast subfunction means in practice  
that engine braking is deactivated, meaning in  
turn that the car's kinetic energy is used to coast  
for longer distances. When the driver releases  
the accelerator pedal the gearbox is automatically  
disengaged from the engine whose speed is  
reduced to idling speed with minimum consump-  
tion.  
The Eco Coast freewheel function is acti-  
vated – engine braking ceases.  
Climate control system settings – some elec-  
tricity consumers are deactivated or operate  
at reduced power.  
ECO button  
ECO symbol in the combined instrument  
panel  
The ECO function is deactivated when the engine  
is switched off, and must therefore be activated  
after each time the engine is started. There are  
5
Not possible on the V40 CROSS COUNTRY with AWD.  
}}  
* Option/accessory. 287  
STARTING AND DRIVING  
This function is intended for use in the event of  
an anticipated reduction in speed, e.g. to coast  
into a zone with a lower speed limit.  
speed is outside the range of  
approx. 65-140 km/h (40-87 mph).  
||  
Deactivate Eco Coast  
In certain situations it may be desirable to deacti-  
vate the Eco Coast function. Examples of such  
situations include:  
More information and settings  
A combination of Eco Coast and temporarily  
deactivated ECO function can also collectively  
contribute to reduced consumption:  
on steep downhill gradients - to be able to  
use engine braking.  
before an imminent overtaking manoeuvre -  
in order to be able to complete it in the saf-  
est possible way.  
Active Eco Coast: Long coasting without  
engine braking = Low consumption  
and  
Deactivating Eco Coast and returning to engine  
braking can be performed as follows:  
Deactivated ECO function: Short coasting  
with engine braking = Minimum consump-  
tion.  
Press the ECO button.  
Move the gear lever to manual "S+/–" posi-  
NOTE  
tion.  
Changing gear with steering wheel paddles.  
Actuate the accelerator or brake pedal.  
However, to achieve optimal low fuel con-  
sumption, Eco Coast in combination with  
short coasting distances should generally be  
avoided.  
The car's menu system MY CAR contains further  
information on the ECO concept - see the sec-  
tion MY CAR (p. 113).  
Eco Coast - Limitations  
The function is not available if:  
Related information  
Economical driving (p. 306)  
Activating Eco Coast  
cruise control is activated  
General information on climate control  
(p. 122)  
The function is activated when the accelerator  
pedal is fully released, in combination with the  
following parameters:  
the road's downhill gradient is steeper than  
approx. 6%  
manual gear changing is performed with the  
steering wheel paddle shifters*  
ECO button activated  
The gear selector is in D position  
engine and/or gearbox are not at normal  
operating temperature  
Speed within the range of  
approx. 65-140 km/h (40-87 mph)  
the gear selector is moved from D - to S+/–  
position  
The road's downhill gradient is not steeper  
than approx. 6%.  
288  

Related Topics

Popular Owner Manuals