STARTING AND DRIVING
3. Insert the pump nozzle in the fuel filler open-
ing. Take care to insert the nozzle properly
into the filler pipe. The filler pipe consists of
two opening caps. The nozzle must be
pushed past both caps before refuelling is
started.
Fuel filler flap - manual opening
The fuel filler flap can be opened manually when
it cannot be opened from outside.
Filling up with fuel
The fuel tank is fitted with a capless fuel filler
system. Filling is carried out as follows:
4. Do not overfill the tank but stop refuelling
when the pump nozzle cuts out the first time.
NOTE
Overfilled fuel in the tank can overflow in hot
weather.
NOTE
Avoid spilling by waiting approximately
5-8 seconds before carefully removing the
nozzle once refuelling is complete.
Open/remove the side hatch in the cargo
area (same side as fuel filler flap).
1. Open the fuel filler door.
2. Choose fuel that is approved for use in the
car in accordance with the identifier10 on the
inside of the fuel filler flap.
Carefully pull the line back in a straight line.
The flap can now be opened from outside.
Related information
See information on approved fuels in the
respective section on petrol (p. 299) and
diesel (p. 300).
Filling with fuel - with a fuel can (p. 302)
•
IMPORTANT
Fuel filler flap - Opening/closing (p. 297)
•
Pull the wire gently - minimal force is required
to disengage the hatch lock.
Related information
Locking/unlocking - fuel filler flap (p. 174)
•
Filling up with fuel (p. 298)
•
10
The identifier in accordance with the CEN standard EN16942 is located on the inside of the fuel filler flap, and will be on corresponding fuel pumps and their nozzles at filling stations throughout Europe at the
latest by the end of 2018.
298
English 
