2010-2022 Volkswagen Amarok Truck Lights, bulbs, switches - interior -> 1 Lights and controls in the dash panel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights, bulbs, switches - interior -> 1 Lights and controls in the dash panel for Your Volkswagen Amarok Truck First Generation (2010-2022)

Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
96 – Lights, bulbs, switches - interior  
1
Lights and controls in the dash pan‐  
el  
⇒ o1.1 f fitting locations - switches in centre of dash panel”,  
page 207  
⇒ a1.2 nd installing light switch”, page 209  
⇒ a1.3 nd installing headlight range control regulator with  
switches and instruments illumination regulator”, page 210  
⇒ a1.4 nd installing buttons in dash panel”, page 212  
1.1  
Overview of fitting locations - switches  
in centre of dash panel  
Overview of fitting locations - switches in centre of dash panel  
up to model year 2017  
Note  
♦ The switches in centre of dash panel are clipped in above  
the radio system or radio navigation system.  
♦ The arrangement and the number of switches depends on  
the vehicle equipment.  
1. Lights and controls in the dash panel  
207  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
1 - Start/stop operation switch  
-E693-  
❑ Equipment version:  
parking aid button -  
E266-  
❑ Equipment version:  
heated rear window  
switch -E15-  
❑ Equipment version:  
blanking cap  
2 - Load area illumination  
switch -E481-  
3 - Hazard warning light  
switch -E3-  
4 - Front passenger side air‐  
bag deactivated warning lamp  
-K145-  
5 - Heated rear window switch  
-E15-  
❑ Only installed in vehi‐  
cles without Climatronic  
❑ Equipment version:  
parking aid button -  
E266-  
❑ Equipment version:  
blanking cap  
Overview of fitting locations - switches in centre of dash panel  
as of model year 2017  
The arrangement may vary depending on the vehicle equip‐  
ment.  
208  
Rep. gr.96 - Lights, bulbs, switches - interior  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
1 - Start/stop operation switch  
-E693-  
2 - Parking aid button -E266-  
3 - Load area illumination  
switch -E481-  
4 - Hazard warning light  
switch -E3-  
5 - Front passenger side air‐  
bag deactivated warning lamp  
-K145-  
6 - Heated rear window switch  
-E15-  
❑ Depending on equip‐  
ment  
7 - Blanking cover  
1.2  
Removing and installing light switch  
Removing:  
– Switch off ignition and all electrical consumers, and withdraw  
ignition key.  
– Turn rotary position indicator of light switch to zero position.  
– Press rotary grip of light switch -1-, and turn it slightly to‐  
wards right -2-.  
– Hold rotary grip in this position and pull light switch out of  
dash panel using rotary grip -3-.  
1. Lights and controls in the dash panel  
209  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
– Release and separate electrical connector.  
Installing:  
Install in the reverse order of removal. When doing this, note  
the following:  
– Connect connector of light switch, and engage it.  
– Hold light switch stationary. Press rotary grip of light switch  
-1-, and turn it slightly towards right -2-.  
– Hold rotary grip in this position, and insert light switch in  
dash panel -3-.  
– Turn rotary grip of to zero position, then release, and engage  
switch.  
1.3  
Removing and installing headlight  
range control regulator with switches  
and instruments illumination regulator  
Note  
♦ Whether headlight range control regulator is fitted or not  
depends on equipment and/or country.  
♦ As of July 2017, dim potentiometers have been discontinued  
on vehicles with automatic headlight control. Instead, there  
is a fixed brightness setting for the dash panel insert and for  
the switch illumination.  
210  
Rep. gr.96 - Lights, bulbs, switches - interior  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
Caution  
When removing and installing components that are in view  
(switches, covers, trim and so on), mask off areas in which  
tools (removal wedge -3409-, screwdriver) are used to lever  
out those components using commercially available masking  
tape.  
Special tools and workshop equipment required  
♦ Removal wedge -3409-  
Removing:  
– Switch off ignition and all electrical consumers, and withdraw  
ignition key.  
– Unclip lateral cover from dash panel on left.  
Note  
For reasons of clarity, the headlight range control regulator is  
illustrated with dash panel trim removed.  
– Press both retaining tabs -arrows-, and remove headlight  
range control regulator inwards.  
– Remove headlight range control regulator -1- sideways out  
of dash panel.  
1. Lights and controls in the dash panel  
211  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
– Press catch -arrow-, and disconnect connector.  
Installing:  
Installation is carried out in the reverse sequence of removal.  
1.4  
Removing and installing buttons in  
dash panel  
⇒ a1.4.1 nd installing buttons in centre of dash panel up to  
model year 2017”, page 212  
⇒ a1.4.2 nd installing buttons in centre of dash panel as of  
model year 2017”, page 214  
1.4.1  
Removing and installing buttons in  
centre of dash panel up to model year  
2017  
Note  
The removal and installation of all switches are performed in the  
same manner and are described only for one switch.  
Caution  
When removing and installing components that are in view  
(switches, covers, trim and so on), mask off areas in which  
tools (removal wedge -3409-, screwdriver) are used to lever  
out those components using commercially available masking  
tape.  
Special tools and workshop equipment required  
212  
Rep. gr.96 - Lights, bulbs, switches - interior  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
♦ Removal wedge -3409-  
Removing:  
– Switch off ignition and all electrical consumers, and withdraw  
ignition key.  
– Unclip compartment in middle on dash panel at points  
marked with -arrows-.  
– Release and disconnect connector -arrow-.  
– Press both detent clips -A-, and push out switch in  
-direction of arrow-.  
1. Lights and controls in the dash panel  
213  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
– Release and disconnect connector from switch.  
Installing:  
Installation is carried out in the reverse sequence of removal.  
Note  
The connectors for switches are colour-coded.  
1.4.2  
Removing and installing buttons in  
centre of dash panel as of model year  
2017  
Special tools and workshop equipment required  
♦ Removal wedge -3409-  
Removing  
– Remove trim panel for dash panel ⇒ General body repairs,  
interior; Rep. gr. 70; Dash panel; Removing and installing  
trim panel for dash panel.  
– Place trim panel for dash panel on a clean surface.  
– Unclip relevant button -1- from trim panel of dash panel -2-,  
and press it towards outside to remove.  
214  
Rep. gr.96 - Lights, bulbs, switches - interior  
Amarok 2011 ➤, Amarok 2017 ➤  
Electrical system - Edition 12.2020  
Installing  
Install in the reverse order of removal, observing the following:  
– Switch must audibly engage in trim panel of dash panel.  
– Check function of switch.  
1. Lights and controls in the dash panel  
215  

Related Topics

Lights, bulbs, switches - interior
2 Lights and controls in front doors 3 Lights and controls in rear doors 4 Lights and controls in the centre console 5 Lights and controls in the roof trim 6 Cigarette lighter and 12-V socket 7 Immobiliser 8 Anti-theft alarm system (ATAS)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot