Amarok 2011 ➤, Amarok 2017 ➤
Electrical system - Edition 12.2020
4
Lights and controls in the centre
console
⇒ a4.1 nd installing buttons in centre console”, page 222
4.1
Removing and installing buttons in
centre console
Depending on vehicle equipment, the following buttons are in‐
stalled in the centre console:
♦ Heated driver seat regulator -E94-
♦ Heated front passenger seat regulator -E95-
♦ Differential lock switch -E121-
♦ TCS and ESP button -E256-
♦ Driving program button -E598-
♦ Running gear program switch -E631- T
♦ Display unit -K40-
♦ Running gear program switch -E631-
Note
The removal and installation of all buttons are performed in the
same manner and are described only for one button.
Caution
When removing and installing components that are in view
(switches, covers, trim and so on), mask off areas in which
tools (removal wedge -3409-, screwdriver) are used to lever
out those components using commercially available masking
tape.
Special tools and workshop equipment required
♦ Removal wedge -3409-
Removing:
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Unclip selector lever cuff with trim at points marked with
-arrows-.
222
Rep. gr.96 - Lights, bulbs, switches - interior
English 
