Amarok 2011 ➤, Amarok 2017 ➤
Electrical system - Edition 12.2020
5
Lights and controls in the roof trim
⇒ a5.1 nd installing front interior light”, page 224
⇒ a5.2 nd installing bulb of front interior light”, page 225
⇒ a5.3 nd installing centre interior light”, page 226
⇒ a5.4 nd installing bulb of centre interior light”, page 227
5.1
Removing and installing front interior
light
Caution
When removing and installing components that are in view
(switches, covers, trim and so on), mask off areas in which
tools (removal wedge -3409-, screwdriver) are used to lever
out those components using commercially available masking
tape.
Special tools and workshop equipment required
♦ Removal wedge -3409-
Removing:
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Unclip lens at points marked with -arrows-.
– Unscrew both screws from interior light, and remote interior
light.
– Release and disconnect connector on interior light.
Installing:
Installation is carried out in the reverse sequence of removal.
224
Rep. gr.96 - Lights, bulbs, switches - interior
English 
