2017-2024 Volkswagen Arteon 4 Door Driver information -> Performance monitor User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information -> Performance monitor for Your Volkswagen Arteon 4 Door First Generation (2017-2024)

The red needle and the number in the center indicate the running time in seconds, and the smaller display in the inner area shows minutes and hours.  
The display on the right side shows the current lap time with an accuracy of 1/100 of a second. If no laps with split times have been saved yet in the lap timer, then  
there is no difference between the stopwatch and the lap time.  
WARNING  
Driver distraction can cause accidents and injuries.  
Only adjust lap timer presets and open the statistics when the vehicle is stationary.  
Only operate the lap timer while driving if the driving situation is easy to control and monitor.  
Performance monitor  
Fig. 16 On the Infotainment system screen: performance monitor.  
Displays  
Arrow buttons to switch to the lap timer  
The performance monitor is a display  
for sporty driving. The digital  
instruments show values in real time for  
engine power, temperature, and  
acceleration that are determined by  
sensors in the vehicle. This gives the  
driver an overview of the driving  
dynamics.  
Opening the performance monitor  
1. Depending on the version, press the  
2. Tap the Vehicle function key.  
3. Tap the Selection function key.  
4. Tap the Sport function key.  
button or function key in the Infotainment system.  
If you want to switch between the performance monitor and the lap timer, tap one of the left or right arrow buttons above the instruments fig. 16  
.
Selecting instruments and adjusting units  
The display can show a maximum of three instruments at the same time. Every instrument can be selected for any display area fig. 16  
1. To switch between instruments, swipe up over the display.  
(left, center, right).  
The instrument that is currently selected will disappear and a new instrument will appear.  
The units on some instruments can be adjusted in the Infotainment system Vehicle settings menu.  
The following instruments can be displayed:  
Boost pressure indicator: the boost pressure indicator fig. 16  
(left) displays the boost pressure between the turbocharger and the engine in bar. The  
farther to the right that the needle on the scale is, the more engine power is being used.  
Accelerometer (g-meter): the accelerometer (g-meter) fig. 16  
(center) displays the acceleration value in the center area in g. The red marking in the tab  
area shows the intensity of the acceleration and the direction of the force. The force in effect is contrary to the physical laws. For example, if you drive to the  
left, the red marking will move in the right area of the instrument and vice versa. When accelerating, the red marking will move downward. When braking, the  
red marking will move upward. The intensity of acceleration is indicated by the position of the red marking from the inside to the outside. If you accelerate  
faster, the red marking will disappear from the center area.  
29  
Power gauge: the power gauge fig. 16  
(right) shows the engine power that is being currently used as a digital value displayed on the surrounding scale in  
kW.  
Engine coolant temperature gauge: when engine load is heavy and outside temperatures are high, the gauge may move farther to the right. This is not a  
cause for concern as long as the indicator light in the instrument cluster display is off or blinking Checking and filling engine coolant .  
Oil temperature gauge: the needle stays in the center area under normal driving conditions. If the pointer is in the left, lower area, the engine operating  
temperature has not yet been reached. If the engine operating temperature has not been reached yet, avoid excessive high speeds and acceleration. Engine  
coolant temperature gauge: when engine load is heavy and outside temperatures are high, the gauge may move farther to the right. This is not a cause for  
concern as long as the  
indicator light in the instrument cluster display is off or blinking Troubleshooting.  
Adjusting the display areas to the driving situation  
You can select the three instruments that best fit your individual driving style and the driving situation.  
WARNING  
Driver distraction can cause accidents and injuries. Operating the Infotainment system can distract you from traffic.  
Always drive attentively and responsibly.  
NOTICE  
Avoid high engine speeds, full acceleration, and heavy engine loads after starting the engine when it is cold.  
Because of the methods that are used to determine power in the vehicle, the displayed values may not be completely precise.  
Vehicle settings menu  
You can switch individual functions and  
systems on and off and adjust settings  
in the vehicle settings menu in the  
Infotainment system.  
Opening the Vehicle settings Menu  
1. Switch the ignition on.  
2. If necessary, switch on the Infotainment system.  
3. Depending on the equipment, press the  
button or function key and select the Vehicle menu.  
button or function key and select the Settings menu.  
Or: depending on the design, press the  
Or: Tap the  
function key and select the Car menu.  
4. To open other menus in the Vehicle settings menu or to adjust settings to the menu items, tap the  
function key and select the relevant function keys.  
5. Tap the  
function key to return to the previous menu.  
A check mark  
indicates that the respective function is switched on.  
System settings and vehicle information display  
Vehicle settings (setup)  
Depending on the vehicle equipment: Think Blue. Trainer.  
Depending on vehicle equipment: Performance monitor Performance monitor.  
Depending on vehicle equipment: Lap timer Infotainment system lap timer.  
Volkswagen Digital Cockpit (Pro) Volkswagen Digital Cockpit Pro, Volkswagen Digital Cockpit Pro Information Displays .  
Active media.  
Driving Data.  
Vehicle status.  
Radio station selection.  
After starting the engine when the 12 V vehicle battery is severely drained or has been replaced or jump-started, system settings, e.g. personal convenience  
settings and programming, may be adjusted or deleted. Check and correct the settings after the 12 V vehicle battery is sufficiently recharged.  
WARNING  
Driver distraction can cause accidents and injuries. Operating the Infotainment system can distract you from traffic.  
Always drive attentively and responsibly.  
30  

Related Topics

Popular Owner Manuals