Get Driver information -> Sport displays Guide for Volkswagen Arteon 4 Door First Generation (2017-2024)

Resetting the service interval display

If the service interval display was not reset after the oil change service or inspection service, the display can be reset as follows:

Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service menu.

Do not reset the service interval display between service intervals or incorrect information will be displayed.

If the oil change service interval was manually reset, the service interval display then also switches to a ﬁxed service interval, even on vehicles with the ﬂexible oil

change service interval.

The service message disappears automatically after a few seconds when the engine is running or when the

is pressed.

button on the multi-function steering wheel

If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the time for the next oil change service

cannot be calculated. Therefore, the service interval displays may show incorrect calculations. If this is the case, follow the maximum permissible maintenance

intervals.

Time

Setting the time in the Infotainment system

1. Depending on the design, press the

button or function key and open the Vehicle menu.

button or function key.

Or: depending on the vehicle equipment, press the

2. Depending on how your vehicle is equipped, open the Settings menu.

3. Select the Time and date menu item to set the time.

Setting the Time in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multi-function steering wheel until the service menu is available in the instrument cluster display ⇒ Service menu.

3. Select Time menu.

4. Set the correct time using the

arrow buttons.

Sport displays

Lap timer in the instrument cluster

The lap timer offers the option to

measure and save the individual lap

times on a race course manually in the

vehicle as well as compare these times

to the best times previously recorded.

Depending on the equipment, the lap timer can be displayed in the instrument cluster.

The following main menus can be displayed:

Lap timer.

Lap (with current lap speciﬁcation).

Statistics.

Switching between menus

1. Press the

button on the multi-function steering wheel.

For example, the following list will show the layout of the menus in the instrument cluster display. The actual scope of the menus and the names of individual menu

items depend on the instrument cluster version and the vehicle electronics.

Menu displays and functions

Lap timer menu:

Start

The time measurement of a lap is started.

Since start The time measurement begins when the vehicle begins to drive. If it is already moving, the time measurement starts when the vehicle comes to a

stop in the meantime.

Statistics An overview of the laps previously recorded is displayed.

Lap menu:

Stop

The active time measurement is paused. The lap is not finished.

Resume The paused time measurement is resumed.

Split time A split time is displayed for approximately five seconds. The active time measurement continues to run simultaneously.

New lap The time of the current lap is stopped and a new lap is started. The time for the finished lap is transferred to the statistics.

Cancel lap The time measurement is stopped and discarded. The current lap will not be recorded in the statistics.

End

The time measurement is finished. The lap will be recorded in the statistics.

Statistics menu:

Back

The display switches back to the previous menu.

All saved statistics data is reset.

Reset

The previously driven lap times are displayed in the Statistics menu. If the maximum lap number of 99 laps or the maximum total duration of 99 hours, 59 minutes

and 59 seconds is reached, a new time measurement can be started before the statistics are reset.

WARNING

Driver distraction can cause accidents and injuries.

Only adjust lap timer presets and open the statistics when the vehicle is stationary.

Only operate the lap timer while driving if the driving situation is easy to control and monitor.

Infotainment system lap timer

Fig. 14 On the Infotainment system screen: lap timer with stopwatch, function key, and lap times.

Fig. 15 Function key on the Infotainment system screen: time measurement when the lap is

stopped,

running, and

finished.

Stopwatch

Function key with current lap time

Saved lap times

Start or resume time measurement; this is only possible when the ignition is switched on. Tap Start to begin the time measurement. The time measurement

starts automatically once the vehicle moves forward. If the data has been reset in the statistics, a new first round can be started.

Cancel the current lap. The lap time is deleted. --: --:--.-- is displayed in the statistics.

End the time measurement.

Stop the time measurement or cancel the current lap when the time measurement is running.

Start new lap. The last lap time is saved and a new lap time starts. The total time of the laps is displayed in the statistics.

Display the split time. The stopwatch stops for several seconds and the split time is displayed.

Display the statistics after ending or canceling the time measurement: number of laps, total time, fastest and slowest lap, average lap time of all laps, all lap

times). Tap Reset to reset the statistics.

A maximum of 99 laps and a maximum duration of 99 hours, 59 minutes and 59 seconds can be recorded. If one of these limits is reached, data in the statistics

must be deleted before starting another time measurement.

Opening the lap timer

1. Depending on vehicle equipment, press the

button or function key.

Or: press the

Or: tap the

button or function key.

function key.

2. Tap the Vehicle function key.

Or: tap Auto function key.

3. Tap the Selection function key.

4. Tap the Sport function key.

The performance monitor will be displayed.

5. Tap one of the arrow buttons in the performance monitor to switch to the lap timer.

You can switch between the lap timer and performance monitor using the arrow buttons.

Measuring lap times

The stopwatch measures the lap time in two areas:

The red needle and the number in the center indicate the running time in seconds, and the smaller display in the inner area shows minutes and hours.

The display on the right side shows the current lap time with an accuracy of 1/100 of a second. If no laps with split times have been saved yet in the lap timer, then

there is no difference between the stopwatch and the lap time.

WARNING

Driver distraction can cause accidents and injuries.

Only adjust lap timer presets and open the statistics when the vehicle is stationary.

Only operate the lap timer while driving if the driving situation is easy to control and monitor.

Performance monitor

Fig. 16 On the Infotainment system screen: performance monitor.

Displays

Arrow buttons to switch to the lap timer

The performance monitor is a display

for sporty driving. The digital

instruments show values in real time for

engine power, temperature, and

acceleration that are determined by

sensors in the vehicle. This gives the

driver an overview of the driving

dynamics.

Opening the performance monitor

1. Depending on the version, press the

2. Tap the Vehicle function key.

3. Tap the Selection function key.

4. Tap the Sport function key.

button or function key in the Infotainment system.

If you want to switch between the performance monitor and the lap timer, tap one of the left or right arrow buttons above the instruments ﬁg. 16

Selecting instruments and adjusting units

The display can show a maximum of three instruments at the same time. Every instrument can be selected for any display area ﬁg. 16

1. To switch between instruments, swipe up over the display.

(left, center, right).

The instrument that is currently selected will disappear and a new instrument will appear.

The units on some instruments can be adjusted in the Infotainment system ⇒ Vehicle settings menu.

The following instruments can be displayed:

Boost pressure indicator: the boost pressure indicator ﬁg. 16

(left) displays the boost pressure between the turbocharger and the engine in bar. The

farther to the right that the needle on the scale is, the more engine power is being used.

Accelerometer (g-meter): the accelerometer (g-meter) ﬁg. 16

(center) displays the acceleration value in the center area in g. The red marking in the tab

area shows the intensity of the acceleration and the direction of the force. The force in effect is contrary to the physical laws. For example, if you drive to the

left, the red marking will move in the right area of the instrument and vice versa. When accelerating, the red marking will move downward. When braking, the

red marking will move upward. The intensity of acceleration is indicated by the position of the red marking from the inside to the outside. If you accelerate

faster, the red marking will disappear from the center area.

Driver information -> Sport displays for Your Volkswagen Arteon 4 Door First Generation (2017-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals